What is 10.0.0.0/24 network for and 172.24.4.2/24 network for ? I guess you are using Neutron. That makes network complicated. I think you can try to debug Neutron. And why are you using two routes to the same network?:
*172.24.4.0 162.242.233.1 255.255.255.0 UG 0 0 0 eth0172.24.4.0 0.0.0.0 255.255.255.0 U 0 0 0 br-ex* *Best Regards！* *Chao Yan--------------**My twitter：Andy Yan @yanchao727 <https://twitter.com/yanchao727>* *My Weibo：http://weibo.com/herewearenow <http://weibo.com/herewearenow>--------------* 2014-08-26 16:06 GMT+08:00 javed alam <[email protected]>: > i had a installed vm from devstack.org script (stack.sh) > i had a running instance of cirros-0.3.2-x86_64-uec > > my route -n command result is > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref > Use Iface > 0.0.0.0 162.242.233.1 0.0.0.0 UG 100 > 0 0 eth0 > 10.0.0.0 172.24.4.2 255.255.255.0 UG 0 > 0 0 br-ex > 10.176.0.0 10.176.160.1 255.240.0.0 UG 0 > 0 0 eth1 > 10.176.160.0 0.0.0.0 255.255.224.0 U 0 > 0 0 eth1 > 10.208.0.0 10.176.160.1 255.240.0.0 UG 0 > 0 0 eth1 > 162.242.233.0 0.0.0.0 255.255.255.0 U 0 > 0 0 eth0 > 172.24.4.0 162.242.233.1 255.255.255.0 UG 0 > 0 0 eth0 > 172.24.4.0 0.0.0.0 255.255.255.0 U > 0 0 0 br-ex > 192.168.122.0 0.0.0.0 255.255.255.0 U 0 > 0 0 virbr0 > my nova list command shows the following result > > > +--------------------------------------+-----------+--------+------------+-------------+-------------------------------+ > | ID | Name | Status | Task State | > Power State | Networks | > > +--------------------------------------+-----------+--------+------------+-------------+-------------------------------+ > | 37eaa19c-3c65-4a4d-84b9-0d977c474a5c | instance1 | ACTIVE | - | > Running | private1=10.0.0.4, 172.24.4.6 | > > +--------------------------------------+-----------+--------+------------+-------------+-------------------------------+ > > > i have a security policies group which includes > Egress IPv4Any-0.0.0.0/0 (CIDR) > EgressIPv6Any-::/0 (CIDR) > > IngressIPv4ICMP-0.0.0.0/0 (CIDR) > > IngressIPv4TCP22 (SSH)0.0.0.0/0 (CIDR) > > but when i put the following command > > ssh [email protected] > the system mind this command and gives the result as follow > > "ssh: connect to host 172.24.4.6 port 22: No route to host" > > i am also unable to ping the floating address > > the problem is that this is a very good result but not acceptable for me in > this situation :-) > > can anybody help me on this ? > > thanks in advance > > > > > _______________________________________________ > Mailing list: > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : [email protected] > Unsubscribe : > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
