update for all
within os-ansible-deployment repo, I've stumbled across scripts/run-playbooks.sh run-playbook.sh runs to completion with no errors. please update document to reflect that openstack-ansible setup-everything.yml should be depreciated or out right replace with scripts/run-playbooks.sh thanks! On Fri, Sep 11, 2015 at 4:56 PM, Duck Euler <[email protected]> wrote: > James, > > thanks for the reply. you are correct, 172.29.236.100 is the haproxy. it's > already on br-mgmt interface. good call. > > upon further inspection, there are two running repo containers : > > aio1_repo_container-xxxxxxx1 > aio1_repo_container-xxxxxxx2 > > the correct information regarding them is in openstack_inventory.json > file. wget to the IP address to one of the repo container shows working > http. so, the repo containers are there and appear to be working. i'm > guessing the focus is to look at haproxy plumbing to finish an install. > > further inspection shows aio1_swift_proxy_container-xxxxxxxx > assuming the same convention for repo, I would expect to see > aio1_repo_proxy_container-xxxxxxxx !?? > > any hints on were haproxy for repo (an all other redundant service > containers other than swift) are living ? hints or other suggestions on > what yaml file to look at editing? > > thanks! > > > > On Fri, Sep 11, 2015 at 3:05 PM, James Denton <[email protected]> > wrote: > >> Have you tried configuring 172.29.236.100 on br-mgmt in addition to the >> address that is there? That is the default IP set for >> internal_lb_vip_address if I’m not mistaken, and is what haproxy will bind >> to. >> >> James >> >> On Sep 11, 2015, at 4:06 PM, Duck Euler <[email protected]> wrote: >> >> >> running os-ansible-deployment all in one. using reference configuration. >> >> following error from ansible run: >> >> TASK: [galera_client | Install pip packages] >> ********************************** >> failed: [aio1_galera_container-fc2a8901] => (item=MySQL-python) => >> {"attempts": 5, "cmd": "/usr/local/bin/pip install MySQL-python", "failed": >> true, "item": "MySQL-python"} >> msg: Task failed as maximum retries was encountered >> >> >> same pip install command from with in container, following error: >> >> root@aio1_galera_container-fc2a8901:/tmp# /usr/local/bin/pip -v install >> MySQL-python >> Ignoring indexes: https://pypi.python.org/simple >> Collecting MySQL-python >> 1 location(s) to search for versions of MySQL-python: >> * http://172.29.236.100:8181/os-releases/11.2.2/ >> Skipping link http://172.29.236.100:8181/os-releases/11.2.2/ (from >> -f); unsupported archive format: .2 >> Getting page http://172.29.236.100:8181/os-releases/11.2.2/ >> Starting new HTTP connection (1): 172.29.236.100 >> Incremented Retry for (url='/os-releases/11.2.2/'): Retry(total=4, >> connect=None, read=None, redirect=None) >> Retrying (Retry(total=4, connect=None, read=None, redirect=None)) after >> connection broken by 'ProtocolError('Connection aborted.', error(111, >> 'Connection refused'))': /os-releases/11.2.2/ >> >> looks like pip is looking for MySQL-python from -> >> http://172.29.236.100:8181/os-releases/11.2.2/ >> >> this is the AllInOne host, ip is configured br-mgnt interface. there is >> no http server on that host:port. >> >> are there suggestions on where to look for getting a http repo server >> installed on local server? or any other advice on getting past this point. >> >> thanks >> >> >> _______________________________________________ >> Mailing list: >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : [email protected] >> Unsubscribe : >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
