Martin Wilderoth <martin.wilderoth@...> writes: > > > I have a question regarding the br-ex interface openvswitch and dvr setup. > > I use dvr-ovs config in liberty. I have problems with accessing external network. > Checking my ovs-vsctl it seems I have vlan taging on networks that could possible explain why I have network problem. > > But the demorouter can ping demo-detwork and router ip, but not gateway and internnet, the same apllys for the instance i have launched In ovs i have some tag attached, but all setup is done by the neurtron-agent except the br-ex interface that i have added and conected to eth3 > > So I have connected br-ex to my eth3 interface. I have not assigend any IP on eth3 nor ex-br as I don't really want that, access to controller/networknode is done via another interface. > > > so my network config / Ubuntu 14.04 is > > auto eth3 > iface eth3 inet manual > > This works fine with openvswitch when i play with simple setup and tapports. I have no config in the network file for my br-ex interface. > > It seems some posts suggests adding extenal ip to my ex-br interface, it relates to older releases but could be correct. > > So my questions are > > Do I have to assign an external IP on my br-ex interface for the system to work ? > Could I do some additional set-up to avoid doing this as the assigned ip will never be used as far as I understand ? > Do I only need to bring it up or do I have to assign a good ip adress ? > > > Please put some light on this, please help me !!!! > > Regards Martin >
Hi! I don't think that an IP is compulsory on the br-ex interface. Where are you seeing vlan tags that should not be there? Can you post you ml2_conf.ini? Tomas _______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
