Replace the ips with yours of course but keep the lines of what I sent you
Inviato da iPhone > Il giorno 30 mag 2016, alle ore 05:45, Thales <[email protected]> ha scritto: > > Thanks, Remo. > > I'm confused, though. Isn't your gateway a netmask? Or do you want me to > substitute my gateway into it? Also, I should use enp0s3 instead of eth1? > And the ipaddr should be my machine's ipaddress? > > > > ...John > > > On Sunday, May 29, 2016 3:42 PM, Remo Mattei <[email protected]> wrote: > > > try this > > > DEVICE=br-ex > TYPE=OVSBridge > DEVICETYPE=ovs > ONBOOT=yes > IPADDR=200.100.100.100 > GATEWAY=255.255.255.254 > PREFIX=27 > DNS1=8.8.8.8 > > > DEFROUTE=yes > NAME="System eth1" > DEVICE=eth1 > TYPE=OVSPort > DEVICETYPE=ovs > OVS_BRIDGE=br-ex > ONBOOT=yes > > >> On May 29, 2016, at 21:59, Thales <[email protected]> wrote: >> >> Remo, >> >> Okay! >> >> Here is the ifcfg-enp0s3 file: >> >> >> DEVICE="enp0s3" >> NAME="enp0s3" >> HWADDR=08:00:27:3F:5C:38 >> BOOTPROTO="none" >> TYPE=OVSPort >> DEVICETYPE=ovs >> OVS_BRIDGE=br-ex >> ONBOOT="yes" >> NM_CONTROLLED=no >> UUID=564f39b1-c69f-46d0-a728-54f667b922f >> >> >> >> Here is the ifcfg-br-ex file: >> >> DEVICE=br-ex >> DEVICETYPE=ovs >> TYPE=OVSBridge >> BOOTPROTO=static >> IPADDR=192.168.1.12 >> NETMASK=255.255.255.0 >> GATEWAY=192.168.1.1 >> DNS1=205.171.3.66 >> DNS2=205.171.202.166 >> ONBOOT=yes >> NM_CONTROLLED=no >> IPV6INIT=n >> >> >> >> ...John >> >> >> On Sunday, May 29, 2016 3:07 AM, Remo Mattei <[email protected]> wrote: >> >> >> can you share the ifcfg-enp0s3 and the ifcfg-br-ex? >> >> Thanks.. >> >> >>> On May 29, 2016, at 08:20, Thales <[email protected]> wrote: >>> >>> Remo, >>> >>> I ran ovs-vsctl show >>> >>> Here is the output for br-ex: >>> >>> Bridge br-ex >>> Port "enp0s3" >>> Interface "enp0s3" >>> Port "qg-eb921913-b5" >>> Interface "qg-eb921913-b5" >>> type: internal >>> Port phy-br-ex >>> Interface phy-br-ex >>> type: patch >>> options: {peer=int-br-ex} >>> Port br-ex >>> Interface br-ex >>> type: internal >>> >>> It's connected to the enp0s3 interface (Centos 7's interface), the br-ex >>> interface, and to the virtual router. >>> >>> >>> About the output of ovs: >>> >>> I'm not sure what you mean exactly. If I ping from the virtual router >>> namespace, I can reach 192.168.1.11 (host os) and 192.168.1.12 (guest os). >>> >>> >>> tcpdump shows that the enp0S3 port detects the 192.168.1.11 ping. >>> The br-ex port detects the 192.168.1.12 ping. >>> >>> >>> ...John >>> >>> On Saturday, May 28, 2016 10:18 PM, Remo Mattei <[email protected]> wrote: >>> >>> >>> What's the config on your external bridge and the output of your ovs? >>> >>> Inviato da iPhone >>> >>>> Il giorno 29 mag 2016, alle ore 02:23, Thales <[email protected]> ha >>>> scritto: >>>> >>>> When I ping 192.168.1.1 from my root namespace, there is a reply. >>>> Pinging 193.128.1.2 gets no reply. Also, my physical router is reachable >>>> at 192.168.1.1, because I configure it via browser with that local IP. >>>> >>>> Thanks for your reply, Remo! >>>> >>>> ...John >>>> >>>> On Saturday, May 28, 2016 2:49 PM, Remo Mattei <[email protected]> wrote: >>>> >>>> >>>> Maybe your gateway is .2 and not .1 did you try that. If that's the case >>>> you need to change that in your openstack config so you can get out >>>> >>>> Inviato da iPhone >>>> >>>>> Il giorno 28 mag 2016, alle ore 12:38, Thales <[email protected]> ha >>>>> scritto: >>>>> >>>>> Hello, >>>>> >>>>> I have RDO ALL-In-One installed. I set up a private network and a >>>>> public (external) network. I set up a virtual router to connect the >>>>> private network to the external network. I have RDO installed on >>>>> Centos 7 as a guest. Windows 10 is my host OS. >>>>> >>>>> When I move into the virtual router's namespace, I can ping the guest >>>>> os's IP address (192.168.1.12) and I can ping the host os's address >>>>> (192.168.1.11), but when I try to ping the gateway (192.168.1.1) it tells >>>>> me it is unreachable. It also fails when I try to ping google.com >>>>> >>>>> I can ping the gateway and google.com from the root namespace of the >>>>> guest os, centos 7. >>>>> >>>>> RDO uses Open vSwitch. >>>>> >>>>> I'd appreciate any help on this problem! >>>>> >>>>> Thanks! >>>>> ...John >>>>> _______________________________________________ >>>>> Mailing list: >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>> Post to : [email protected] >>>>> Unsubscribe : >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >> >> >> !DSPAM:1,574b4059265991592320407! >> _______________________________________________ >> >> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> Post to : [email protected] >> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >> >> >> >> !DSPAM:1,574b4059265991592320407! > > > > > !DSPAM:1,574ba956261066828414661!
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
