Le 14/08/2013 13:51, Alexander Graf a écrit : > On 07.08.2013, at 14:16, Guillaume Gardet wrote: > >> Hi, >> >> some updates below: >> >> >> Le 05/08/2013 16:35, Guillaume Gardet a écrit : >>> Hi, >>> >>> I tested beagle image from factory (but this problem should occur on all >>> other boards) and it does not boot at all, with this message: >>> ************************************************************ >>> U-Boot SPL 2013.04 (May 28 2013 - 14:13:22) >>> OMAP SD/MMC: 0 >>> spl: error reading image u-boot.bin, err - -1 >>> ### ERROR ### Please RESET the board ### >>> ************************************************************ >>> >>> First problem is in BOOT partition, all available files are under a boot/ >>> folder and nothing at the root of the partition. >> >> Still need to be fixed. Any kiwi update which could have broken things? >> Marcus? >> Previously we had files in the root of the partition but also in the boot/ >> folder. >> >> I think first partition should be mounted in /boot entry of 2nd partition >> (main FS). Was it the case previously, or not? Alex? > Yes, the first partition is /boot in fstab.
I mean during kiwi build. > >> >>> When u-boot want to run load_fdt for non device tree board, it tries to run >>> 1. Which is wrong but should not be fatal. >> Fixed. > This was on purpose. 1 is "true", so it's a command that simply gives us a > good error code. Oups. Should be re-enabled if it is needed. Guillaume -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
