Le 29/10/2013 15:42, Marcus Schäfer a écrit : > Hi, > >>> when I build locally JeOS-raspberrypi image, I get a *.raw image but it >>> seems that partitioning is a bit strange. >>> We have the 2 partitions: >>> * 1st: FAT32 for Pi bootloader (mandatory unfortunately) with bootflag >>> enabled >>> * 2nd: EXT4 for rootfs >>> >>> But when I want to boot on it, it just does not boot at all, whereas it is >>> readable from my desktop openSUSE. >>> >>> The thing is fdisk reports some problems with "v" command to verify >>> partitions: >>> Partition 1: head 160 greater than maximum 124 >>> >>> >>> Partition 1: previous sectors 411655 disagrees with total 193971 >>> >>> >>> Partition 2: previous sectors 1865727 disagrees with total 897422 >>> >>> >>> Remaining 5974015 unallocated 512-byte sectors >>> >>> If I repartition manually my SD card, number of heads/sectors are different >>> and then I copy back the files on each partition and it does boot. >>> I guess there is a problem with kiwi partitioning related to number of >>> heads/sectors. >> If I just redo 1st partition with YaST partitionner but decrease partition >> size from 1 cylinder, it does boot. Whereas fdisk still reports previous >> problems. >> Not sure if it could help. >> >> Tell me if you need more tests. > Sounds really strange :)
Indeed. > > Could you send the kiwi build log file, the one from the create step > is enough. kiwi uses parted only to create partition tables. I'm most > interested in the parted calls from the log file Full build log is available here: http://guillaume.gardet.free.fr/openSUSE/RPi/Marcus/build.log Guillaume > > Thanks > > Regards, > Marcus -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
