Thanks for your reply again.
I tried to upgrade as follows and it failed.
1. I changed the repository to
http://download.opensuse.org/ports/armv7hl/distribution/13.1/repo/oss/ (and
removed the old repositories)
2. I did "zypper dup"
3. then about 576 packages needed to be upgraded, etc
4. it downloaded all these packages
5. it installed 23 packages
6. then it failed.
This is the log ("rtas" is my hostname):
( 21/845) Installing: xbitmaps-1.1.1-9.1.1 ...............................[done]
( 22/845) Installing: yast2-trans-stats-2.19.0-14.1.3 ....................[done]
( 23/845) Installing: glibc-2.18-4.4.1 ...................................[done]
Additional rpm output:
/usr/sbin/glibc_post_upgrade: While trying to execute /usr/sbin/iconvconfig
child terminated abnormally
warning: %post(glibc-2.18-4.4.1.armv7hl) scriptlet failed, exit status 115
( 24/845) Installing: libgcc_s1-4.8.1_20130909-3.2.7 ....................[error]
Installation of libgcc_s1-4.8.1_20130909-3.2.7 failed:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed: Command
was killed by signal 4 (Illegal instruction).
Abort, retry, ignore? [a/r/i] (a): r
( 24/845) Installing: libgcc_s1-4.8.1_20130909-3.2.7 ....................[error]
Installation of libgcc_s1-4.8.1_20130909-3.2.7 failed:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed: Command
was killed by signal 4 (Illegal instruction).
Abort, retry, ignore? [a/r/i] (a): a
Problem occured during or after installation or removal of packages:
Installation aborted by user
Please see the above error message for a hint.
There are some running programs that use files deleted by recent upgrade. You
may wish to restart some of them. Run 'zypper ps' to list these programs.
rtas:~ # zypper ps
Check failed:
Executing 'lsof' failed (132).
rtas:~ # zypper dup
Illegal instruction
rtas:~ #
Any hints how to continue?
Thanks a lot.
> -------- Oorspronkelijk bericht --------
> Onderwerp: Re: [opensuse-arm] OpenSUSE 13.1 for armv7 upgrade
> Le 19/11/2013 15:52, G. Heim a écrit :
>> Thanks for your quick answer. I have a mirabox and I suppose the standard
>> kernel won't work anyway (it took me quite some time to get a running kernel
>> when I installed OpenSUSE 12.3).
>
> Our kernel-default should work if you pass a valid device tree for the
> mirabox.
>
>>
>> I already made an image of my SD card, thanks for the hint.
>>
>>> So, you could upgrade the software in your rootfs, but not the kernel ATM.
>> So that means the rootfs for OpenSUS 13.1 is already available? Where can I
>> get it and how do I upgrade?
>
> Yes and no.
>
> I mean you can do a "zypper dup" using 13.1 repos:
> http://download.opensuse.org/ports/armv7hl/distribution/13.1/repo/oss/
>
> Otherwise, the 13.1 rootfs is available here:
> http://download.opensuse.org/ports/armv7hl/distribution/13.1/appliances/?C=M;O=D
> Grab the latest armv7 rootfs tbz file.
>
> Please tell us if all is ok once updated.
>
> Guillaume
>
>
>
>>
>> Thanks again.
>>
>> ----------------------------------------
>>> Date: Tue, 19 Nov 2013 14:29:18 +0100
>>> From: [email protected]
>>> To: [email protected]; [email protected]
>>> Subject: Re: [opensuse-arm] OpenSUSE 13.1 for armv7 upgrade
>>>
>>> Hi,
>>>
>>> Le 19/11/2013 14:13, G. Heim a écrit :
>>>> Hi all,
>>>>
>>>> OpenSUSE 13.1 for PC just came out. I understood that there will be an
>>>> armv7 version. Is that correct? And if so, when and where can I find it?
>>> Currently, our ARM images are not ready.
>>> What is your board?
>>>
>>>> What is the (preferably easy) way to upgrade my existing 12.3 to 13.1 (by
>>>> not reinstalling everything)?
>>> I would recommand to backup your system (make an image of your SD card) to
>>> restore it if things goes wrong.
>>>
>>> Moreover, kernel for 13.1 is not good ATM (does not boot on beagleboard and
>>> pandaboard, at least).
>>>
>>> So, you could upgrade the software in your rootfs, but not the kernel ATM.
>>>
>>>
>>> Guillaume
>>>
>>>
>>>> Thanks. --
>>>> To unsubscribe, e-mail: [email protected]
>>>> To contact the owner, e-mail: [email protected]
>>>>
>>>>
>>>
>
> --
> To unsubscribe, e-mail: [email protected]
> To contact the owner, e-mail: [email protected]
> --
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
