Hi,
I'm currently trying to bring up a uEVM board, and have what I believe
all the correct components for it [0]. Regardless of having a dtb
package and using kernel 3.14-rc2 it still fails to boot, with u-boot
complaining. Below is my boot log, does anyone have ideas/tips to
resolve this?
U-Boot SPL 2014.01 (Feb 25 2014 - 21:55:07)
OMAP5432 ES2.0
U-Boot 2014.01 (Feb 25 2014 - 21:55:07)
CPU : OMAP5432 ES2.0
Board: OMAP5432 uEVM
I2C: ready
DRAM: 2 GiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
** Unrecognized filesystem type **
4713776 bytes read in 271 ms (16.6 MiB/s)
** File not found /boot/omap5-uevm.dtb **
Booting from mmc0 ...
Kernel image @ 0x80200000 [ 0x000000 - 0x47ed30 ]
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
mmc1(part 0) is current device
SD/MMC found on device 1
** Unrecognized filesystem type **
** No partition table - mmc 1 **
I'm hoping to be able to demo this at Linaro Connect next week with Xen
running ontop.
Thanks,
Andy
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
