Hi,
Le 17/06/2015 14:01, Edgar Dombrowski a écrit :
Hi Raspi-Friends.
First thanks to Alex, Freek et remerciements pour Guillaume.for indicating the
Repos for the various files for the Raspi B and Raspi 2 and pointing out the
different versionS JeoS; XCFE and LXQT.
I have downloaded the there xz.files and installed them on a sd-stick.
But when, I get the folowing messages:
> Net: Net initialization skipped
> No ethernet found ---------> Cable was connected to an HDLC-Router
> hit any key to stop autoboot: 2 > 1 > 0
> switch to partitions #0: OK
> mmc0 is current device
> scanning mmc0:1...
> Found U-Boot script /boot.scr
> reading /boot.src
> 115 bytes read in 420 ms (0 Bytes/s)
> # executing script at 00000000
> 2708 bytes read in 420 ms (1000 Bytes/s)
> # executing script at 00000200
> 4389568 bytes read in 56550 ms (75.2 KiB/s)
No further reaction
Do you have any explanation why the boot process had stopped?
I think it is not stopped but it is slowly loading the initrd which is much
bigger than the kernel which was slowly loaded (75.2 KiB/s) just before.
So, just wait some minutes. I would say 10 minutes or maybe more I am afraid. :(
I do not know why load is so slow on u-boot for the Raspberry Pi.
Guillaume
Thanks for you assistance.
Edgar, DJ3PU, Munich
P.S. I am preparing an article to be included in Magazine of the German Amateur
Radio Club (DARC) on implementing
Ham Radio Programs into the Rasberry Pi, succeding up to today with
Debian-Squeeze, but with OpenSUSE ???
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
