2015-12-11 16:43 GMT+03:00 Guillaume Gardet <[email protected]>: > > > Le 11/12/2015 10:46, Matwey V. Kornilov a écrit : >> >> 2015-12-11 12:42 GMT+03:00 Guillaume Gardet <[email protected]>: >>> >>> >>> Le 11/12/2015 10:10, Matwey V. Kornilov a écrit : >>>> >>>> 2015-12-11 12:04 GMT+03:00 Guillaume Gardet <[email protected]>: >>>>> >>>>> Hi, >>>>> >>>>> Le 11/12/2015 09:55, Matwey V. Kornilov a écrit : >>>>>> >>>>>> Hello, >>>>>> >>>>>> I am using >>>>>> openSUSE-Tumbleweed-ARM-JeOS-beaglebone.armv7l-1.12.1-Build350.1.raw >>>>>> from openSUSE:Factory:ARM and see the following: >>>>>> >>>>>> U-Boot SPL 2016.01-rc1 (Dec 01 2015 - 16:30:32) >>>>>> bad magic >>>>>> bad magic >>>>>> spl_register_fat_device: fat register err - -1 >>>>>> spl_register_fat_device: fat register err - -1 >>>>>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>>>>> spl: ext4fs_open failed >>>>>> spl: ext4fs_open failed >>>>>> spl_load_image_ext: error reading image uImage, err - -1 >>>>>> >>>>>> >>>>>> U-Boot 2016.01-rc1 (Dec 01 2015 - 16:30:32 +0000) >>>>>> >>>>>> Watchdog enabled >>>>>> I2C: ready >>>>>> DRAM: 512 MiB >>>>>> NAND: 0 MiB >>>>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >>>>>> *** Error - No Valid Environment Area found >>>>>> *** Warning - bad CRC, using default environment >>>>>> >>>>>> Net: <ethaddr> not set. Validating first E-fuse MAC >>>>>> cpsw, usb_ether >>>>>> => >>>>>> >>>>>> Something is probably wrong. >>>>> >>>>> >>>>> What happen if you type 'boot' command? >>>> >>>> It boots! Magic! >>>> Thank you, but why it doesn't happen automatically? >>> >>> >>> Maybe you hit a key on your keyboard stopping autoboot? >>> >>> Is the autoboot count down shown? >> >> No, I've tried several times. It is just waiting for a command in prompt. > > > Could you try 2016.01-rc2 available at: > home:Guillaume_G:branches:Base:System > > If you still have this problem, please report it upstream.
I've found the problem and sent the patch to upstream. https://patchwork.ozlabs.org/patch/555979/ Moreover, I've found another problem with 2016.01-rc2: http://lists.denx.de/pipermail/u-boot/2015-December/237604.html u-boot is full of bugs! :) > >> >>>>>> p.s. I am not sure that it is related to u-boot, but is there any >>>>>> reason >>>>>> why rc-s of u-boot appear in Factory? Would it be better to test them >>>>>> on >>>>>> kittens instead of users? >>>>>> >>>>> Most of the time, I test u-boot on boards available to me when I update >>>>> it. >>>>> But, I do not have all boards supported by openSUSE, so it may break >>>>> some >>>>> boards, but the sooner it is detected, the better it is! ;) >>>>> >>>>> >>>> It makes sense. >>>> Still would be great to have another JeOS which is guaranteed working >>>> out of the box. >>> >>> >>> Standard release (13.2 or 13.1). ;) >>> >> Which is not there anymore, leap doesn't support armv7 and tumbleweed >> is supplied with rc of u-boot :) > > > Yes, Leap without 32 bits support (both ARM and x86) is very annoying... :( We should do something with it. > > > Guillaume > -- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp://[email protected] -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
