Am 13.02.2016 um 16:34 schrieb Andreas Färber: > With this package gone, there are two main ones left in > https://build.opensuse.org/project/show/devel:ARM:Factory:Contrib:sunxi > > * kernel-sun4i, last updated two years ago, and > * u-boot-hyundaia7hd, not updated for more than a year (v2014.04). [...] > JeOS-cubieboard and JeOS-cubieboard2 are built in Factory these days, > and given the old state of the kernel I assume it is no longer used? > > If someone wants to play with Mali then a KMP may be a better approach.
Initial Utgard and Midgard KMPs are now available in: https://build.opensuse.org/project/show/devel:ARM:Factory:Contrib:Mali They're my first KMPs, so there may be some packaging glitches, but at least they finally build now, for both Tumbleweed and Leap. Untested. In order to actually try them, you'll need a Device Tree with Mali node added according to the bindings in the tarball. I.e., either patch your SoC's .dtsi file and build a new .dtb for your board or, maybe easier looking forward, extend your local boot.scr script to insert that node at boot time via "dtb" commands. Not yet packaged is xf86-video-mali, so you'll need to use fbdev. With those KMPs in place, I have double-checked that cubieboard and cubieboard2 images are getting built in Factory: https://build.opensuse.org/package/show/openSUSE:Factory:ARM/JeOS-cubieboard https://build.opensuse.org/package/show/openSUSE:Factory:ARM/JeOS-cubieboard2 There was no link diff even for using the local Contrib repo, so entirely duplicate apparently. The Wiki page pointed to the official location, so did not need an update for dropping them. https://en.opensuse.org/HCL:CubieBoard https://en.opensuse.org/HCL:CubieBoard2 kernel-source and kernel-sun4i (3.4.29) failed to build due to mali and gcc5 respectively, so dropping them now. Board support will be broader in the Tumbleweed kernel, and Mali functionality can be added via KMP. u-boot-hyundaia7hd failed to build due to gcc5, and https://build.opensuse.org/request/show/359208 has been reviewed by Guillaume and is just waiting on Dirk to accept and set up the _link, so dropping it here. https://en.opensuse.org/Category:ARM_devices does not list an HCL page for that device that would need updating. This brings :Factory:Contrib:sunxi down to zero packages, saving on our precious build power and making room for any temporary Pine64 packages. https://build.opensuse.org/project/show/devel:ARM:Factory:Contrib:sunxi Cheers, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
