Hi Dieter, Could you try the latest image from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Odroid/images/
Guillaume Le 29/01/2016 14:47, Dieter Thalmayr a écrit :
Hi there, Guillaume Gardet helped me to get an odroid u3 running with a SUSE anything younger than a 12.3. Actually, we used an image that can be found at http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Odroid/images/ That image is "factory". We had many issues with the uboot bootloader, but after months and close to one dozen tries the bootloader boots the kernel. But then: ----snip ---- U-Boot 2016.01 (Jan 25 2016 - 22:47:58 +0000) CPU: Exynos4412 @ 1 GHz Model: Odroid based on Exynos4412 Board: Odroid based on Exynos4412 Type: u3 DRAM: 2 GiB LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling LDO21@TFLASH_2.8V: set 2800000 uV; enabling MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment Net: No ethernet found. Hit any key to stop autoboot: 0 2721 bytes read in 135 ms (19.5 KiB/s) ## Executing script at 42000000 autoboot=if test -e mmc 0 boot.scr; then; run boot_script; elif test -e mmc 0 I; baudrate=115200 boardname=odroidu3 boot_fit=setenv kerneladdr 0x42000000;setenv kernelname Image.itb;run loadkerne} boot_script=run loadbootscript;source ${scriptaddr} boot_uimg=setenv kerneladdr 0x40007FC0;setenv kernelname uImage;run check_dtb;r; boot_zimg=setenv kerneladdr 0x40007FC0;setenv kernelname zImage;run check_dtb;r; bootargs=Please use defined boot bootcmd=run autoboot bootdelay=0 check_dtb=if run loaddtb; then setenv fdt_addr ${fdtaddr};else setenv fdt_addr;; check_ramdisk=if run loadinitrd; then setenv initrd_addr ${initrdaddr};else set; console=console=ttySAC1,115200n8 consoleoff=set console console=ram; save; reset consoleon=set console console=ttySAC1,115200n8; save; reset dfu_alt_info=Please reset the board dfu_alt_system=uImage fat 0 1;zImage fat 0 1;Image.itb fat 0 1;uInitrd fat 0 1;2 fdtaddr=40800000 fdtcontroladdr=bae47f70 fdtfile=exynos4412-odroidu3.dtb fileaddr=42000000 filesize=aa1 initrdaddr=42000000 initrdname=uInitrd kernel_args=setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootwa} loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} boot.scr loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} ${fdtfile} loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} ${initrdname} loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} ${kernelname} mmcbootdev=0 mmcbootpart=1 mmcrootdev=0 mmcrootpart=2 scriptaddr=0x42000000 soc_id=4412 soc_rev=2.0 Environment size: 2090/4092 bytes switch to partitions #0, OK mmc0 is current device 7420680 bytes read in 4206 ms (1.7 MiB/s) 68337422 bytes read in 31408 ms (2.1 MiB/s) 53476 bytes read in 464 ms (112.3 KiB/s) Kernel image @ 0x40007fc0 [ 0x000000 - 0x713b08 ] ## Loading init Ramdisk from Legacy Image at 44007fc0 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 68337358 Bytes = 65.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43f07fc0 Booting using the fdt blob at 0x43f07fc0 Using Device Tree in place at 43f07fc0, end 43f180a3 Starting kernel ... --- snap --- and afterwards only the sad sound of the ventilator. Does anybody have an idea what goes wrong? What can I do to get more information Plus, I would be very interested in building an image on my own. Is there somewhere a howto that can help me with the first steps? Although I have to admit that I am only a high-hearted amateur if it comes down to real technics.. Greetings Dieter
-- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
