On 03/02/2016 11:30 PM, Herbert Graeber wrote:
Am Dienstag, 1. März 2016, 12:25:59 CET schrieb Freek de Kruijf:
[...]
Tried JeOS Build388.1 from
http://download.opensuse.org/ports/armv6hl/tumbleweed/images/
works OK. We finally have a working Tumbleweed image for the Raspberry Pi 1.
I tried Build 388.2 and it does not work for me. And I tried Build 388.1 from
devel:/ARM:/Factory:/Contrib:/RaspberryPi/images/ and it doesn't work either.
minicom shows the following:
U-Boot 2016.03-rc2 (Feb 26 2016 - 21:24:17 +0000)
DRAM: 384 MiB
RPI Model B rev2 (0xf)
MMC: bcm2835_sdhci: 0
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 **
Using default environment
In: serial
Out: lcd
Err: lcd
Net: Net Initialization Skipped
No ethernet found.
starting USB...
USB0: Core Release: 2.80a
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 1 Ethernet Device(s) found
Hit any key to stop autoboot: 0
U-Boot>
Looks like U-Boot detected input. Maybe the serial cable is loose? Try
to type "boot" and press enter here.
Alex
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
