On Tue, Dec 13, 2016 at 05:18:12PM +0100, Thomas Bechtold wrote: > Hi, > > I also tested the cubox-i images for Leap 42.2 and TW. And filled > https://bugzilla.opensuse.org/show_bug.cgi?id=1015013 (Leap) > and https://bugzilla.opensuse.org/show_bug.cgi?id=1015185 (TW). > > On Tue, Dec 13, 2016 at 10:54:40AM +0100, Matthias Brugger wrote: > > > > > > On 12/12/16 23:39, Alessio Adamo wrote: > > > Hi Matthias, > > > > > > on the working system the following modules are loaded: > > > > > > Module Size Used by > > > brcmfmac 241664 0 > > > brcmutil 20480 1 brcmfmac > > > cfg80211 524288 1 brcmfmac > > > > > > > I checked the kernel config and they are all build as modules. > > > > > and the following packages installed: > > > > > > pullin-bcm43xx-firmware & b43-fwcutter from > > > openSUSE-Ports-Tumbleweed-repo-oss > > > b43-firmware from packman > > I think that is not needed. Your device should have a BCM4330 or BCM4329 > and both are supported by upstream kernel (afaik). > The problem I had was, that brcm/brcmfmac4330-sdio.txt was not > available (see dmesg).
https://build.opensuse.org/request/show/448673 should fix it. Having brcmfmac4330-sdio.txt lists a wlan0 in /sys/class/net/ and the firmware is loaded: [ 511.430292] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 25 2011 19:34:12 version 5.90.125.104 [ 511.449619] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) Best, Tom -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
