Brüns, Stefan wrote: > On Mittwoch, 15. März 2017 08:52:28 CET Per Jessen wrote: >> I don't seem to be able to run NTP on my nanopi neo air - when I try >> to start it, it enters a loop of stopping and starting, reporting >> "0.0.0.0 c01d 0d kern kernel time sync disabled". > > Are you sure this is the complete message? Please post the complete > message,including the timestamps and linebreaks, as you did for the > dmesg output.
Sorry, no, that wasn't the complete log. This is the bit that repeats when ntpd is being restarted: 15 Mar 19:55:39 ntpd[6275]: 192.168.2.254 local addr 192.168.2.40 -> <null> 15 Mar 19:55:39 ntp_intres[6276]: 0.0.0.0 c01d 0d kern kernel time sync disabled 15 Mar 19:55:39 ntpd[6275]: 0.0.0.0 c01d 0d kern kernel time sync disabled 15 Mar 19:55:40 ntpd[6292]: Listen and drop on 0 v6wildcard [::]:123 15 Mar 19:55:40 ntpd[6292]: Listen and drop on 1 v4wildcard 0.0.0.0:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 2 lo 127.0.0.1:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 3 wlan0 192.168.2.40:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 4 lo [::1]:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 5 wlan0 [2a03:7520:4c68:1:ff99::bf4f]:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 6 wlan0 [2a03:7520:4c68:1:890f:3340:d181:8f2e]:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 7 wlan0 [2a03:7520:4c68:1:96a1:a2ff:fea3:ba7a]:123 15 Mar 19:55:40 ntpd[6292]: Listen normally on 8 wlan0 [fe80::96a1:a2ff:fea3:ba7a%2]:123 15 Mar 19:55:40 ntpd[6292]: Listening on routing socket on fd #25 for interface updates 15 Mar 19:55:40 ntpd[6292]: Listen normally on 9 multicast [ff05::101]:123 15 Mar 19:55:40 ntpd[6292]: Joined ff05::101 socket to multicast group ff05::101 15 Mar 19:55:40 ntpd[6292]: 0.0.0.0 c01d 0d kern kernel time sync enabled 15 Mar 19:55:40 ntpd[6292]: 0.0.0.0 c012 02 freq_set kernel 0.000 PPM 15 Mar 19:55:40 ntpd[6292]: 0.0.0.0 c016 06 restart 15 Mar 19:55:41 ntpd[6292]: Listen for broadcasts to 192.168.7.255 on interface #3 wlan0 15 Mar 19:55:42 ntpd[6292]: ::1 config: server 192.168.2.254 15 Mar 19:55:42 ntpd[6292]: ntpd exiting on signal 15 (Terminated) 15 Mar 19:55:42 ntpd[6292]: 192.168.2.254 local addr 192.168.2.40 -> <null> 15 Mar 19:55:42 ntpd[6292]: 0.0.0.0 c01d 0d kern kernel time sync disabled 15 Mar 19:55:42 ntp_intres[6293]: 0.0.0.0 c01d 0d kern kernel time sync disabled > Read https://www.novell.com/coolsolutions/feature/15345.html and try > if this helps ... Nope - I added "server 192.168.2.254 burst iburst", almost the same result as above. Interesting - then I ran "strace ntpd -u ntp:ntp -c /etc/ntp.conf", and that worked. At least it keeps running: 15 Mar 19:59:28 ntpd[8033]: ntpd exiting on signal 15 (Terminated) 15 Mar 19:59:28 ntpd[8033]: 192.168.2.254 local addr 192.168.2.40 -> <null> 15 Mar 19:59:28 ntpd[8033]: 0.0.0.0 c01d 0d kern kernel time sync disabled 15 Mar 19:59:28 ntp_intres[8034]: 0.0.0.0 c01d 0d kern kernel time sync disabled 15 Mar 20:01:26 ntpd[8263]: Listen and drop on 0 v6wildcard [::]:123 15 Mar 20:01:26 ntpd[8263]: Listen and drop on 1 v4wildcard 0.0.0.0:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 2 lo 127.0.0.1:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 3 wlan0 192.168.2.40:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 4 lo [::1]:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 5 wlan0 [2a03:7520:4c68:1:ff99::bf4f]:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 6 wlan0 [2a03:7520:4c68:1:890f:3340:d181:8f2e]:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 7 wlan0 [2a03:7520:4c68:1:96a1:a2ff:fea3:ba7a]:123 15 Mar 20:01:26 ntpd[8263]: Listen normally on 8 wlan0 [fe80::96a1:a2ff:fea3:ba7a%2]:123 15 Mar 20:01:26 ntpd[8263]: Listening on routing socket on fd #25 for interface updates 15 Mar 20:01:26 ntpd[8263]: Listen normally on 9 multicast [ff05::101]:123 15 Mar 20:01:26 ntpd[8263]: Joined ff05::101 socket to multicast group ff05::101 15 Mar 20:01:26 ntpd[8263]: 0.0.0.0 c01d 0d kern kernel time sync enabled 15 Mar 20:01:26 ntpd[8263]: 0.0.0.0 c012 02 freq_set kernel 0.000 PPM 15 Mar 20:01:26 ntpd[8263]: 0.0.0.0 c016 06 restart 15 Mar 20:01:27 ntpd[8263]: Listen for broadcasts to 192.168.7.255 on interface #3 wlan0 15 Mar 20:01:48 ntpd[8263]: 0.0.0.0 c615 05 clock_sync 15 Mar 20:03:56 ntpd[8263]: 0.0.0.0 0618 08 no_sys_peer # ntpq -pn remote refid st t when poll reach delay offset jitter ============================================================================== 192.168.2.254 .DCFa. 1 u 52 64 1 9.115 -0.233 0.001 fe80::202:a5ff: LOCAL(0) 11 u 14 16 7 7.196 -26.854 7.523 So it seems to only affect ntp when it's started from systemd? -- Per Jessen, Zürich (11.4°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
