Hi Per, Am 18.04.2017 um 18:51 schrieb Andreas Färber: > With today's update to v2017.05-rc2, there now is a u-boot-nanopineoair > package in Base:System:Staging for you to test. > > If you interrupt it on serial and type "printenv fdtfile", I would > expect that you see a different .dtb filename than for -nanopineo. > > The sun8i-h3-nanopi-neo-air.dtb file is however not part of kernel 4.11 > (i.e., not in Kernel:HEAD), so you would need to try kernel-vanilla and > dtb-sun8i from Kernel:linux-next. Or try just the .dtb file from there, > with a Factory or Kernel:HEAD kernel-lpae. > > To use the partially-working sun8i-h3-nanopi-neo.dtb as before with the > new u-boot-nanopineoair, you could use a symlink. > > Small steps...
Haven't heard back here yet. Note that I've recently (when touching it) prepared a JeOS image with the above bootloader: https://en.opensuse.org/HCL:NanoPi_Neo_Air It still requires the above workarounds for the .dtb, thus in a Contrib. Some feedback before oSC17 would be appreciated, as I don't have one. Thanks, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
