Am 13.10.2017 um 11:22 schrieb Alexander Graf: > On 13.10.17 11:17, Frank Kunz wrote: >> I'm doing some test with EFI boot on an olinuxino board here: https:// >> build.opensuse.org/package/show/home:frank_kunz:branches:openSUSE:Factory:ARM/ >> JeOS-olinuxinolime >> >> The image works and the kernel has a device-tree visible under /proc/device- >> tree. With non EFI configurations the device-tree is loaded by uboot from >> the >> boot partition dtb directory and is then passed to the kernel by boot >> command. >> For EFI there is no dtb directory. Also I haven't found a *.dtb file on the >> filesystem anywhere. >> >> How does the kernel get the device-tree in EFI boot mode? > > It gets it from either a device tree that gets loaded from /boot/dtb or > if none is found from the built-in device tree that U-Boot contains. > >> The background is that some hardware specific configurations need to be done >> per >> use case in the device-tree. E.g. adding a battery or a touch screen. >> Without >> the device-tree settings the kernel will not probe the devices. Enabling >> that >> on u-boot boot mode can be done by either modifying the device-tree file or >> create overlays and load them by u-boot script with "fdt apply" command. How >> can this be configured in EFI mode? > > There are a couple of approaches. I think by now you can add dt overlays > on demand even after the kernel is loaded, so you could just have a > systemd service adding them for you.
Please provide proof of such a feature - I don't believe it's in 4.13, and I haven't noticed it in 4.14-rc yet. Patchsets have been around for a long time... Depending on what overlay operation is desired, fdt apply could just operate on $fdtcontroladdr for the internal tree today. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
