Hi Andreas, On Wed, Oct 25, 2017 at 06:06:26AM +0900, Andreas Färber wrote: > Hi Alex, > > Am 25.10.2017 um 03:14 schrieb Alexander Bergmann: > > I'm not sure how to enable SPI in openSUSE Leap 43.3. I've changed the > > config.txt file and added "dtparam=spi=on", this has however no affect > > on the hardware. The same steps are working in Raspbian. > > > > #> cat /proc/device-tree/soc/spi@7e204000/status > > disabled > > > > Any ideas? > > Please see my examples linked from the 40-pin connector on the HCL Wiki > page.
Hmmm, I've digged through the wiki last night, but I was unable to find it. Could you post the link here? > Since we use U-Boot, such external Raspberry Pi examples won't work and > you should use U-Boot's fdt apply command instead. Intressting, I'm still trying to understand the whole boot process and at which time which component is loaded and can be modified. I thought the config.txt is loaded directly before u-boot and therefore SPI gets activated via that dtparam switch. So I have to get my head around the whole EFI boot. Thanks, Alex~ -- Alexander Bergmann <[email protected]>, Security Engineer, GPG:9FFA4886 SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg)
signature.asc
Description: Digital signature
