On 08.11.2017 23:22, Alexander Graf wrote: > > > On 08.11.17 21:17, Matwey V. Kornilov wrote: >> On 08.11.2017 23:07, Alexander Graf wrote: >>> >>> >>> On 08.11.17 21:00, Matwey V. Kornilov wrote: >>>> Hi, >>>> >>>> I am trying to run >>>> openSUSE-Tumbleweed-ARM-JeOS-efi.armv7l-2017.10.29-Build1.7.raw >>>> using qemu. >>>> >>>> When I use qemu-system-aarch64 with 64-bit UEFI code >>>> aavmf-aarch64-code.bin then the only I see is the EFI console: >>>> >>>> UEFI Interactive Shell v2.287477C2-69C7-11D2-8E39-00A0C969723B B8F1C820 >>>> >>>> EDK IIlProtocolInterface: 752F3136-4E16-4FDC-A22A-E5F46812F4CA B8F1FF18 >>>> >>>> UEFI v2.60 (EDK II, 0x00010000)008-7F9B-4F30-87AC-60C9FEF5DA4E B8348710 >>>> >>>> Mapping table >>>> FS0: Alias(s):HD1a0b:;BLK2: >>>> >>>> VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/Scsi(0x0,0x0)/HD(1,GPT,E30D92E4-F475-4D50-9D3D-DF05DA812008,0x800,0x64004) >>>> BLK5: Alias(s): >>>> VenHw(F9B94AE2-8BA6-409B-9D56-B9B417F53CB3) >>>> BLK0: Alias(s): >>>> VenHw(8047DB4B-7E9C-4C0C-8EBC-DFBBAACACE8F) >>>> BLK1: Alias(s): >>>> >>>> VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/Scsi(0x0,0x0) >>>> BLK3: Alias(s): >>>> >>>> VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/Scsi(0x0,0x0)/HD(2,GPT,3DF8DD35-94BC-4FF0-B74C-12853D4B1811,0x65000,0x83004) >>>> BLK4: Alias(s): >>>> >>>> VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/Scsi(0x0,0x0)/HD(3,GPT,38C4AA8C-4A7F-49C4-BCFD-6C2C755496BD,0xE8800,0x3DE781) >>>> >>>> Press ESC in 1 seconds to skip startup.nsh or any other key to continue. >>>> FSOpen: Open '\startup.nsh' Success >>>> FSOpen: Open '\startup.nsh' Success >>>> FSOpen: Open '\startup.nsh' Success >>>> Shell> bootarm >>>> FSOpen: Open '\efi\boot\bootarm.EFI' Success >>>> FSOpen: Open '\efi\boot\bootarm.EFI' Success >>>> FSOpen: Open '\efi\boot\bootarm.EFI' Success >>>> FSOpen: Open '\efi\boot\bootarm.EFI' Success >>>> [Security] 3rd party image[0] can be loaded after EndOfDxe: >>>> VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000)/Scsi(0x0,0x0)/HD(1,GPT,E30D92E4-F475-4D50-9D3D-DF05DA812008,0x800,0x64004)/\efi\boot\bootarm.EFI. >>>> InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B B8EDE440 >>>> Unloading driver at 0x00000000000 >>>> Shell> Error Status: Unsupported (line number 1) >>>> >>>> >>>> As far as I understand, 64-bit Qemu UEFI code doesn't expect to see and >>>> run 32-bit EFI executable. >>> >>> Correct, as far as UEFI is concerned, a 32bit ARM binary could as well >>> be a MIPS one ;). It's a different, unsupported platform for it. >>> >>>> When I try to use qemu-uefi-aarch32.bin as firmware, then I see the >>>> following: >>>> >>>> Initialization of device cfi.pflash01 failed: failed to read the initial >>>> flash content >>>> >>>> As far as I understand, qemu-uefi-aarch32.bin is in wrong format, but >>>> there are no other files in ovfm rpm package. >>> >>> Which ovmf package are you looking at? I'm not sure we properly package >>> OVMF for AArch32. But you can always try with the Linaro built ones :) >>> >>> http://snapshots.linaro.org/components/kernel/leg-virt-tianocore-edk2-upstream/latest/QEMU-ARM/RELEASE_GCC5/ >> >> Well, the last thing I see using linaro's DEBUG build is the following: >> >> SetUefiImageMemoryAttributes - 0x00000000BBA48000 - 0x0000000000002000 >> (0x0000000000004000) >> Found Timer interrupts 29, 30, 27, 26 >> InstallProtocolInterface: 26BACCB3-6F42-11D4-BCE7-0080C73C8881 BBA48010 >> Loading driver E660EA85-058E-4B55-A54B-F02F83A24707 >> InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B BAF790A8 >> add-symbol-file >> /home/buildslave/workspace/leg-virt-tianocore-edk2-upstream/edk2/Build/ArmVirtQemu-ARM/DEBUG_GCC5/ARM/MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe/DEBUG/DisplayEngine.dll >> 0xBBA26000 >> Loading driver at 0x000BBA25000 EntryPoint=0x000BBA26031 DisplayEngine.efi >> InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF BAF79990 >> ProtectUefiImageCommon - 0xBAF790A8 >> - 0x00000000BBA25000 - 0x000000000001C000 >> SetUefiImageMemoryAttributes - 0x00000000BBA25000 - 0x0000000000001000 >> (0x0000000000004000) >> SetUefiImageMemoryAttributes - 0x00000000BBA26000 - 0x0000000000017000 >> (0x0000000000020000) >> SetUefiImageMemoryAttributes - 0x00000000BBA3D000 - 0x0000000000004000 >> (0x0000000000004000) >> >> Then happens nothing but 100% CPU load. > > The file on the link I provided works just fine for me: > > $ qemu-system-arm -nographic -M virt -cpu cortex-a15 -bios QEMU_EFI.fd >
What is your qemu version? Mine is > qemu-system-arm --version QEMU emulator version 2.9.1(openSUSE Leap 42.3) > > Alex > -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org