Hi Stefan, > Am 17.11.2017 um 23:46 schrieb Stefan Brüns <[email protected]>: > > Hi, > > currently config.sh creates several SoC specific files ad-hoc (i.e. using > echo). This has several drawbacks: > > - it bloats config.sh (e.g 840 lines for the omap beagle /var/lib/alsa/ > asound.state) > - it creates files which are not tracked by RPM > - most importantly, these files are never updated
There is one more problem: The mechanism only works with images, not the installer. Ideally, we could somehow get override logic like this working with the installer as well. Is there some rpm magic that automatically selects a package depending on dmi information for example? Or dt compatibles? Alex > > All these files could be moved into some SoC specific package, e.g. soc- > config-$(kiwi-iname). > > If there are no objections, I will prepare an appropriate package and submit > to Factory. The next step then is to remove the config file creation from the > JeOS files and Require the SoC specific package instead. > > The list of affected files (sorted by kiwi image name): > > arndale: > /etc/dracut.conf.d/exynos_modules.conf [1] > /etc/modprobe.d/90-blacklist-xhci.conf > > chromebook: > /etc/dracut.conf.d/exynos_modules.conf [1] > /etc/X11/xorg.conf.d/50-touchpad.conf > /etc/modules-load.d/cros-ec-keyb.conf > > beagle: > /etc/dracut.conf.d/omap_modules.conf > /etc/modprobe.d/50-omapdrm.conf > /var/lib/alsa/asound.state > > panda: > /etc/dracut.conf.d/omap_modules.conf > /etc/modprobe.d/50-omapdrm.conf > > beaglebone: > /etc/dracut.conf.d/beagleboneblack_modules.conf > > pine64, cubietruck, cubieboard, olinuxino: > /etc/dracut.conf.d/sunxi_modules.conf > > sabrelite: > /etc/dracut.conf.d/sabrelite_modules.conf > /etc/modules-load.d/imx6.conf > > raspberrypi: > /etc/dracut.conf.d/raspberrypi_modules.conf [2] > /etc/modprobe.d/90-blacklist-vc4.conf > > raspberrypi2: > /etc/dracut.conf.d/raspberrypi_modules.conf [2] > > raspberrypi3: > /etc/dracut.conf.d/raspberrypi_modules.conf [2] > /etc/modprobe.d/50-rpi3.conf > > socfpgade0nanosoc: > /etc/dracut.conf.d/socfpga_modules.conf > > odroidc2, nanopik2: > /etc/dracut.conf.d/meson_gxbb_modules.conf > > m400: > /etc/sysconfig/network/ifcfg-enp1s0 > > Kind regards, > > Stefan > > [1] contents of exynos_modules.conf for chromebook and arndale differs > [2] contents of raspberrypi_modules.conf for rpi1/rpi2/rpi3 differs > > -- > Stefan Brüns / Bergstraße 21 / 52062 Aachen > home: +49 241 53809034 mobile: +49 151 50412019 -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
