> Am 07.03.2018 um 19:12 schrieb Matwey V. Kornilov <[email protected]>:
> 
> 07.03.2018 21:01, Matwey V. Kornilov пишет:
>> 
>> Hello,
>> 
>> I am trying to use
>> openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64-2018.03.07-Build2.1.raw to run
>> Rock64. I use manually compiled u-boot
>> 2018.01-rc2-02249-g19e31fac0d-dirty and see the following:
>> 
>> => load mmc 1:1 0x02000000 efi/boot/bootaa64.efi
>> reading efi/boot/bootaa64.efi
>> MMC: block number 0x100008005 exceeds max(0x1dacc00)
>> MMC: block number 0x100008005 exceeds max(0x1dacc00)
>> Invalid FAT entry
>> 6144 bytes read in 11 ms (544.9 KiB/s)
>> 
>> This didn't happen when we used kiwi-7 to build JeOS at Factory.
>> Can it be some issue with FAT16/FAT32?
>> 
> 
> Not sure, that related, but
> 
> EFI created by Kiwi-7
> 
> System ID "mkfs.fat"
> Media byte 0xf8 (hard disk)
>       512 bytes per logical sector
>      4096 bytes per cluster
>         1 reserved sector
> First FAT starts at byte 512 (sector 1)
>         2 FATs, 16 bit entries
>    102400 bytes per FAT (= 200 sectors)
> Root directory starts at byte 205312 (sector 401)
>       512 root directory entries
> Data area starts at byte 221696 (sector 433)
>     51146 data clusters (209494016 bytes)
> 63 sectors/track, 255 heads
>         0 hidden sectors
>    409604 sectors total
> 
> EFI created by Kiwi-9
> 
> System ID "mkfs.fat"
> Media byte 0xf8 (hard disk)
>       512 bytes per logical sector
>      2048 bytes per cluster
>         1 reserved sector
> First FAT starts at byte 512 (sector 1)
>         2 FATs, 12 bit entries
>      2048 bytes per FAT (= 4 sectors)
> Root directory starts at byte 4608 (sector 9)
>       512 root directory entries
> Data area starts at byte 20992 (sector 41)
>      1013 data clusters (2074624 bytes)
> 32 sectors/track, 64 heads
>         0 hidden sectors
>      4096 sectors total

We reduced the size of the efi partition to 2MB. Maybe that triggered a bug in 
U-Boot?

Could you try to build an image with a 16mb partition instead?


Alex

> 
> -- 
> To unsubscribe, e-mail: [email protected]
> To contact the owner, e-mail: [email protected]
> 

--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]

Reply via email to