Alexander Graf wrote: > > On 17.04.18 01:57, Alex Armstrong wrote: >> Freek de Kruijf wrote: >>> Op dinsdag 20 maart 2018 17:05:58 CET schreef Kasimir _: >>>> Both abort the boot process with the message: "Initramfs unpacking >>>> failed: write error" >>>> >>>> Raspberry Pi 1: >>>> - Image: >>>> openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2018.03.19-Build1.1.raw.xz >>>> - Console output: https://paste.opensuse.org/5939196 >>>> >>>> Raspberry Pi2: >>>> - Image: >>>> openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2018.03.19-Build1.1.raw.xz >>>> - Console output: https://paste.opensuse.org/77297849 >>>> N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�������Ǩ� >>> I am able to get a little further. >>> You probably did not clear the highest 1024 bytes. >>> You can use: >>> dev="/dev/sdX" # X is you device with SD card >>> echo "Clear last 1024 bytes" >>> ssize=$(/usr/sbin/blockdev --getss /dev/$dev) >>> [ $ssize -ne 512 ] && echo "Sector size not equal 512" && exit 1 >>> size=$(/usr/sbin/blockdev --getsz /dev/$dev) >>> dd if=/dev/zero of=/dev/$dev obs=1 seek=$(($size - 2)) count=2 >>> >> I can confirm this with the Raspberry Pi 1. >> >> I noticed a broken link in the /boot/ directory; the initrd symbolic >> link points to initrd-4.14.14-1-default which doesn't exist. Probably >> not the cause though, as grub loads initrd.vmx directly and changing the >> link doesn't make any difference. Also the initrd.vmx file is 73MB - >> which seems a bit large. > We currently have problems publishing newer code for Tumbleweed, so the > image you're getting today unfortunately doesn't have the fix in yet. > > Could you please try to fetch the latest unpublished one using > > $ osc getbinaries openSUSE:Factory:ARM JeOS:JeOS-raspberrypi images armv6l > > and try again with that one? That should have all the latest additions > such as > > * dracut based initrd (no two-step initrd problems anymore) > * config.txt overlays supported > > We're still working on making publishing work again so you can get the > image with your browser, but that will unfortunately take a bit. > > > Alex Thank you for the update. I tested the unpublished obs image and it works well.
-ARA -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org