Op zondag 15 juli 2018 15:44:33 CEST schreef Stefan Brüns: > On Sonntag, 15. Juli 2018 15:24:25 CEST Freek de Kruijf wrote: > > Apparently there are images for Tumbleweed and Leap 15.0 for the Banana Pi > > M2. > > > > Question: Are there also images for the Banana Pi M3 or should the images > > for Raspberry Pi 3B also work for this device? > > TLDR: no > > M3 uses an Allwinner A83T, an 32 bit ARM processor with 8 cores. > > RPi3 uses a Broadcom BCM2837, a 64 bit ARM processor with 4 cores. > > For booting, you need a board specific image (unless you have one of the few > boards which use UEFI, but these typically come in a case ready for > deployment in you data center). > > The userland is the same for all boards with a common architecture, but 32 > and 64 bit ARM are different. > > Kind regards, > > Stefan
Thanx Stefan, Still the question remains: is there is an openSUSE image for this device? In the ARMv7 series? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
