Op woensdag 10 april 2019 16:22:06 CEST schreef Matthias Brugger: > On 10/04/2019 12:36, Freek de Kruijf wrote: > > Op donderdag 4 april 2019 21:01:07 CEST schreef Freek de Kruijf: > >> I searched on the Internet for the answer. Did not find even the > >> question. > >> > >> Is there any support for a Raspberry Pi camera, bcm2835, on a Rasphberry > >> Pi > >> in an openSUSE system? > > > > Started with the latest Tumbleweed image for the Raspberry Pi 3B > > (aarch64). > > This one contains kernel version 4.20.13-1.1. > > Did find some information, even found that the kernel module bcm2835-v4l2 > > is present in the kernel-default package. > > Also found that gpu_mem in /boot/efi/config.txt needs to be at least 128. > > Did give the command "modprobe -i bcm2835-v4l2 which indeed loaded the > > module together with other modules. > > However got the warning: > > bcm2835_v4l2: module is from the staging directory, the quality is > > unknown, > > you have been warned. > > And the error messages: > > bcm2835-v4l2: error -1 while loading driver > > bcm2835-camera: probe of bcm2835-camera failed with error -1 > > I had a quick glance at the source and it is not clear to me where this > error comes from. You could try to install the kernel from our Kernel:HEAD > repository and retry: > https://download.opensuse.org/repositories/Kernel:/HEAD/ARM/
Still the same problem. Output: media: Linux media interface: v0.10 videodev: Linux video capture interface: v2.00 bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_v4l2: vchiq_mmal_component_init: failed to create component -1 (Not enough GPU mem?) bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -1 bcm2835-camera: probe of bcm2835-camera failed with error -1 Before installation of kernel-default-5.1.rc4-1.1.g1478096 I changed gpu_mem to 128, however it was back to 32 afterwards. So I changed it first to 128 and later 192 (max). Did not help. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
