Hi,
> -----Original Message----- > From: [email protected] <[email protected]> > Sent: 13 June 2019 01:28 > To: [email protected] > Subject: [opensuse-arm] wicked Error after 'zyyper up'. > > Hi > > I used openSUSE Thumbleweed > "openSUSE-Tumbleweed-ARM-JeOS-ultra96.aarch64-2019.04.25-Build6.30". > It worked fine. But yesterday I ran "zipper up" and reboot this, I got the > error > below when booting up. > [FAILED] Failed to start wicked DHCPv4 supplicant service. > See 'systemctl status wickedd-dhcp4.service' for details. > [FAILED] Failed to start wicked AutoIPv4 supplicant service. > See 'systemctl status wickedd-auto4.service' for details. > [FAILED] Failed to start wicked DHCPv6 supplicant service. > See 'systemctl status wickedd-dhcp6.service' for details. > Starting wicked network management service daemon... > [ **] (2 of 2) A start job is running for.ervice daemon (1min 53s / 3min > 7s) > After this, wifi doesn't work. I checked the wifi router, this gave IP to > Ultra96 board. But I run "ip a" and found no ipv4 address. > : wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state > UP group default qlen 1000 > link/ether 20:c3:8f:8c:bf:f6 brd ff:ff:ff:ff:ff:ff > inet6 2001:240:2405:cbeb:6192:8bd:c571:ac43/64 scope global temporary > dynamic > valid_lft 604768sec preferred_lft 86180sec > inet6 2001:240:2405:cbeb:22c3:8fff:fe8c:bff6/64 scope global dynamic > mngtmpaddr > valid_lft forever preferred_lft forever > inet6 fe80::22c3:8fff:fe8c:bff6/64 scope link > valid_lft forever preferred_lft forever > > Is this know bug? And is there any workaround for this? Probably this bug: https://bugzilla.opensuse.org/show_bug.cgi?id=1132774 Could you try to comment the following line (add a # at the beginning of the line): ExecStartPre=-/usr/bin/udevadm settle in '/usr/lib/systemd/system/wickedd.service' file to check if it workarounds the problem, please? Thanks, Guillaume > > Best Regards. > > Ryo > > -- > To unsubscribe, e-mail: [email protected] > To contact the owner, e-mail: [email protected] IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
