Hi,

> -----Original Message-----
> From: Michael Ströder <[email protected]>
> Sent: 11 September 2019 13:34
> To: openSUSE ARM ML <[email protected]>
> Subject: [opensuse-arm] RPI1 does not boot after Tumbleweed upgrade
>
> HI!
>
> I'm running Tumbleweed on RPI1 (armv6). It does not boot after last
> upgrade to kernel from 5.2.10 to 5.2.13. During upgrade there were no
> error messages.

Did you update the kernel only, or the whole distribution (maybe including 
firmware)?

>
> At first glance the content of /boot and the firmware partition (ls of
> both appended below) looks ok to me. But it does not show the boot screen.

By boot screen, you mean:
a. the rainbow screen
b. u-boot steps
c. grub screen
?

Do you have a serial connection?

Cheers,
Guillaume


>
> Any idea what went wrong?
>
> Ciao, Michael.
>
> ---------------------- /boot ---------------------------
> -rw-r--r--  1 root root       65 Aug 25 14:00 .zImage-5.2.10-1-default.hmac
> -rw-r--r--  1 root root       65 Sep  7 00:46 .zImage-5.2.13-1-default.hmac
> -rw-r--r--  1 root root  2804018 Aug 25 14:00 System.map-5.2.10-1-default
> -rw-r--r--  1 root root  2804143 Sep  7 00:13 System.map-5.2.13-1-default
> -rw-r--r--  1 root root     1725 Jul 31 14:24 boot.readme
> -rw-r--r--  1 root root   181536 Aug 25 14:00 config-5.2.10-1-default
> -rw-r--r--  1 root root   181536 Sep  6 22:45 config-5.2.13-1-default
> -rw-r--r--  1 root root        0 Sep 10 14:37 do_purge_kernels
> drwxr-xr-x  2 root root     4096 Nov 30  2018 efi/
> drwxr-xr-x  6 root root     4096 Sep 10 14:48 grub2/
> lrwxrwxrwx  1 root root       23 Sep 10 14:37 initrd ->
> initrd-5.2.13-1-default
> -rw-------  1 root root 13740612 Sep 10 14:45 initrd-5.2.10-1-default
> -rw-------  1 root root 13741540 Sep 10 14:48 initrd-5.2.13-1-default
> -rw-r--r--  1 root root       11 Nov 30  2018 mbrid
> -rw-r--r--  1 root root   306143 Aug 25 14:00 symvers-5.2.10-1-default.gz
> -rw-r--r--  1 root root   306154 Sep  7 00:19 symvers-5.2.13-1-default.gz
> -rw-r--r--  1 root root      207 Aug 25 14:00 sysctl.conf-5.2.10-1-default
> -rw-r--r--  1 root root      207 Sep  7 00:19 sysctl.conf-5.2.13-1-default
> -rw-r--r--  1 root root  1484762 Nov 30  2018 unicode.pf2
> drwxr-xr-x  3 root root     4096 Sep 10 14:35 vc/
> -rw-r--r--  1 root root  7443992 Aug 25 14:00 vmlinux-5.2.10-1-default.gz
> -rw-r--r--  1 root root  7447454 Sep  7 00:25 vmlinux-5.2.13-1-default.gz
> lrwxrwxrwx  1 root root       23 Sep 10 14:37 zImage ->
> zImage-5.2.13-1-default
> -rw-r--r--  1 root root  6187360 Aug 25 14:00 zImage-5.2.10-1-default
> -rw-r--r--  1 root root  6187360 Sep  7 00:46 zImage-5.2.13-1-default
>
> --------------------------- /dev/sdb1 ---------------------------
> drwxr-xr-x  4 root root  16384 Jan  1  1970 ./
> drwxr-xr-x 18 root root   4096 Sep  7 11:58 ../
> drwxr-xr-x  3 root root   2048 Nov 30  2018 EFI/
> -rwxr-xr-x  1 root root  27529 Jul 28 20:57 bcm2708-rpi-0-w.dtb*
> -rwxr-xr-x  1 root root  28432 Sep 10 14:35 bcm2708-rpi-b-plus.dtb*
> -rwxr-xr-x  1 root root  28173 Sep 10 14:35 bcm2708-rpi-b.dtb*
> -rwxr-xr-x  1 root root  27950 Sep 10 14:35 bcm2708-rpi-cm.dtb*
> -rwxr-xr-x  1 root root  28634 Sep 10 14:35 bcm2708-rpi-zero-w.dtb*
> -rwxr-xr-x  1 root root  27898 Sep 10 14:35 bcm2708-rpi-zero.dtb*
> -rwxr-xr-x  1 root root  29520 Sep 10 14:35 bcm2709-rpi-2-b.dtb*
> -rwxr-xr-x  1 root root  31325 Sep 10 14:35 bcm2710-rpi-3-b-plus.dtb*
> -rwxr-xr-x  1 root root  30706 Sep 10 14:35 bcm2710-rpi-3-b.dtb*
> -rwxr-xr-x  1 root root  29504 Sep 10 14:35 bcm2710-rpi-cm3.dtb*
> -rwxr-xr-x  1 root root  44472 Sep 10 14:35 bcm2711-rpi-4-b.dtb*
> -rwxr-xr-x  1 root root   1476 Sep 10 14:35 config.txt*
> -rwxr-xr-x  1 root root   1476 Sep 10 14:35 config.txt.rpmsave*
> drwxr-xr-x  2 root root  16384 Sep 10 14:35 overlays/
> -rwxr-xr-x  1 root root      8 Nov 30  2018 startup.nsh*
> -rwxr-xr-x  1 root root 443036 Jul 28 20:54 u-boot.bin*

IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.

Reply via email to