Hi,
> -----Original Message----- > From: Thorsten Kukuk <[email protected]> > Sent: 05 January 2020 14:35 > To: [email protected] > Subject: [opensuse-arm] Raspberry Pi4 - usb-disk and initrd > > Hi, > > today I installed openSUSE MicroOS on my Rasperry Pi4s with the kernel from > Kernel:stable. > > It seems to work fine (except that only 1GB of memory is detected, which is > not > enough for Kubernetes ...). IIRC, the problem was with u-boot-rpi64 package, but it should be fixed in current release. Matthias, any idea? > > But the USB sdcard is only accessible after leaving the initrd, which makes it > impossible for ignition to read the configuration file to finalize the image > configuration. > Any idea which kernel module is missing in the initrd or didn't got loaded? > All the > usual suspects seems to be there. You mean you boot from SD but use an USB sd card reader for your config file? Cheers, Guillaume > > Thanks, > Thorsten > > -- > Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & MicroOS SUSE > Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany > Managing Director: Felix Imendoerffer (HRB 36809, AG Nürnberg) > -- > To unsubscribe, e-mail: [email protected] > To contact the owner, e-mail: [email protected] IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
