Hi Guillaume,
Maybe even better, I got an u-boot log over the console.
U-Boot SPL 2019.01 (Aug 21 2019 - 17:22:46 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
U-Boot 2019.01 (Aug 21 2019 - 17:22:46 +0000)
CPU: Altera SoCFPGA Platform
FPGA: Altera Cyclone V, SE/A4 or SX/C4, version 0x0
BOOT: SD/MMC Internal Transceiver (3.0V)
DRAM: 1 GiB
MMC: dwmmc0@ff704000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default
environment
In: serial
Out: serial
Err: serial
Model: Terasic DE-0(Atlas)
Net:
Error: ethernet@ff702000 address not set.
eth-1: ethernet@ff702000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
** Invalid partition 2 **
** Invalid partition 3 **
** Unrecognized filesystem type **
starting USB...
USB0: scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
No ethernet found.
Error: ethernet@ff702000 address not set.
missing environment variable: pxeuuid
Error: ethernet@ff702000 address not set.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
Error: ethernet@ff702000 address not set.
No ethernet found.
Error: ethernet@ff702000 address not set.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
...
Thanks,
Christian
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
