Hello community, here is the log from the commit of package cups for openSUSE:Factory checked in at Sun Oct 2 09:55:05 CEST 2011.
-------- --- openSUSE:Factory/cups/cups.changes 2011-09-23 01:54:44.000000000 +0200 +++ /mounts/work_src_done/STABLE/cups/cups.changes 2011-09-29 15:17:11.000000000 +0200 @@ -1,0 +2,54 @@ +Thu Sep 29 15:10:07 CEST 2011 - jsm...@suse.de + +- Reverted the change from meissner below dated + "Fri Sep 23 09:54:39 CEST 2011" so that baselibs.conf again + contains only one line "cups-libs" as before because the + submitrequest 85423 Printing/cups -> openSUSE:Factory/cups + was declined by coolo with the following reason: + "cups-devel-32bit requires cups-32bit (default requires), + which does not exist". + +------------------------------------------------------------------- +Thu Sep 29 11:51:21 CEST 2011 - jsm...@suse.de + +- Upgraded to CUPS 1.4.8 + * network backends could crash if a printer returned a value + of 0 for the maximum capacity for a supply (STR #3875) + * For a complete list see the CHANGES.txt file. +- Upgraded to CUPS 1.4.7 + * imageto* filters could crash with bad GIF files (STR #3867) + * CUPS did not work with some printers that incorrectly + implemented the HTTP/1.1 standard (STR #3778, STR #3791) + * Fixed crash in scheduler when the application/octet-stream + MIME type was not defined (STR #3690) + * The web interface no longer tries to use multi-part delivery + when adding printers (STR #3455) using Epiphany or IE + * "lp" and "lpr" failed with Kerberos enabled (STR #3768) + * Remote printer URIs with options did not work (STR #3717) + * The scheduler now only looks up interface hostnames + if HostNameLookups are enabled (STR #3737) + * The scheduler could crash if a browsed printer times out + while a job is printing (STR #3754) + * For a complete list see the CHANGES.txt file. + +------------------------------------------------------------------- +Thu Sep 29 11:20:00 CEST 2011 - jsm...@suse.de + +- cups-1.4.4-set_default_RIPCache_128m.patch enlarges + the CUPS upstream default RIPCache from 8m to 128m + to avoid various kind of printout failures + (STR #3535, and Novell/openSUSE Bugzilla bnc#628233). + +------------------------------------------------------------------- +Fri Sep 23 09:54:39 CEST 2011 - meiss...@suse.de + +- cups-devel baselibs package for Wine 32bit on 64bit building + (added "cups-devel requires cups-libs..." to baselibs.conf). + +------------------------------------------------------------------- +Sun Sep 18 00:09:02 UTC 2011 - jeng...@medozas.de + +- Remove redundant tags/sections from specfile + (removed "norootforbuild" and the "clean" section). + +------------------------------------------------------------------- @@ -5 +59,3 @@ -- "zh" is probably meant as "zh_CN", as "zh_TW" exists. + (move /usr/share/locale/no to /usr/share/locale/nb). +- "zh" is probably meant as "zh_CN", as "zh_TW" exists + (move /usr/share/locale/zh to /usr/share/locale/zh_CN). @@ -31 +87 @@ -- Fixing coolo's quick and ditry unconditioned +- Fixed coolo's quick and ditry unconditioned calling whatdependson for head-i586 Old: ---- cups-1.4.6-source.tar.bz2 New: ---- cups-1.4.4-set_default_RIPCache_128m.patch cups-1.4.8-source.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ cups.spec ++++++ --- /var/tmp/diff_new_pack.lDHE9V/_old 2011-10-02 09:54:59.000000000 +0200 +++ /var/tmp/diff_new_pack.lDHE9V/_new 2011-10-02 09:54:59.000000000 +0200 @@ -15,7 +15,6 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # -# norootforbuild Name: cups @@ -35,9 +34,9 @@ Group: Hardware/Printing Summary: The Common UNIX Printing System # Source0...Source9 is for sources from upstream: -# URL for Source0: http://ftp.easysw.com/pub/cups/1.4.6/cups-1.4.6-source.tar.bz2 -# MD5 sum for Source0 on http://www.cups.org/software.php de8fb5a29c36554925c0c6a6e2c0dae1 -Version: 1.4.6 +# URL for Source0: http://ftp.easysw.com/pub/cups/1.4.8/cups-1.4.8-source.tar.bz2 +# MD5 sum for Source0 on http://www.cups.org/software.php 0ec52d3f3c69bc2ab5ed70c594edbce6 +Version: 1.4.8 Release: 2 Source0: cups-%{version}-source.tar.bz2 # Require the exact matching version-release of the cups-libs sub-package because @@ -109,6 +108,10 @@ # Patch105 reverts changes by CUPS STR #3461 as band-aid workaround # to avoid https://bugzilla.novell.com/show_bug.cgi?id=617026 for now: Patch105: cups-1.4.4-str3461-1.4.reverted.patch +# Patch106 enlarges the CUPS upstream default RIPCache from 8m to 128m +# to avoid various kind of printout failures +# see https://bugzilla.novell.com/show_bug.cgi?id=628233 +Patch106: cups-1.4.4-set_default_RIPCache_128m.patch # Install into this non-root directory (required when norootforbuild is used): BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -230,6 +233,8 @@ # Patch105 reverts changes by CUPS STR #3461 as band-aid workaround # to avoid https://bugzilla.novell.com/show_bug.cgi?id=617026 for now: %patch105 -p1 +# Patch106 enlarges the CUPS upstream default RIPCache from 8m to 128m: +%patch106 %build # Disable SILENT run of make so that make runs verbose as usual: @@ -341,9 +346,6 @@ # Run fdupes: %fdupes $RPM_BUILD_ROOT -%clean -#test -n "$RPM_BUILD_ROOT" && rm -rf $RPM_BUILD_ROOT - %pre /usr/sbin/groupadd -g 71 -o -r ntadmin 2>/dev/null || : # exit successfully in any case: ++++++ cups-1.4.4-set_default_RIPCache_128m.patch ++++++ --- scheduler/conf.c.orig 2010-09-15 12:37:30.000000000 +0200 +++ scheduler/conf.c 2010-04-23 20:56:34.000000000 +0200 @@ -540,7 +540,7 @@ cupsdReadConfiguration(void) cupsdClearString(&DefaultPaperSize); - cupsdSetString(&RIPCache, "8m"); + cupsdSetString(&RIPCache, "128m"); cupsdSetString(&TempDir, NULL); --- scheduler/cupsfilter.c.orig 2010-03-31 00:07:33.000000000 +0200 +++ scheduler/cupsfilter.c 2010-09-15 12:39:14.000000000 +0200 @@ -1218,7 +1218,7 @@ read_cupsd_conf(const char *filename) /* else set_string(&FontPath, CUPS_FONTPATH); - set_string(&RIPCache, "8m"); + set_string(&RIPCache, "128m"); if ((temp = getenv("CUPS_SERVERBIN")) != NULL) set_string(&ServerBin, temp); --- doc/help/ref-cupsd-conf.html.in.orig 2010-04-23 20:56:34.000000000 +0200 +++ doc/help/ref-cupsd-conf.html.in 2010-09-15 12:45:44.000000000 +0200 @@ -2646,7 +2646,7 @@ appear inside a <A HREF="#Location"><COD <H3>Examples</H3> <PRE CLASS="command"> -RIPCache 8m +RIPCache 128m RIPCache 1g RIPCache 2048k </PRE> @@ -2657,8 +2657,9 @@ RIPCache 2048k memory cache used by Raster Image Processor ("RIP") filters such as <CODE>imagetoraster</CODE> and <CODE>pstoraster</CODE>. The size can be suffixed with a "k" for kilobytes, "m" for megabytes, -or "g" for gigabytes. The default cache size is "8m", or 8 -megabytes.</P> +or "g" for gigabytes. The default cache size is "128m", or 128 +megabytes (compare <A HREF="http://www.cups.org/str.php?L3535";> +<CODE>CUPS STR 3535</CODE></A>).</P> <H2 CLASS="title"><SPAN CLASS="info">CUPS 1.1.16</SPAN><A NAME="RootCertDuration">RootCertDuration</A></H2> ++++++ cups-1.4.6-source.tar.bz2 -> cups-1.4.8-source.tar.bz2 ++++++ ++++ 12591 lines of diff (skipped) continue with "q"... Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
