Hello community,

here is the log from the commit of package xrefresh for openSUSE:Factory 
checked in at 2018-04-07 20:50:07
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xrefresh (Old)
 and      /work/SRC/openSUSE:Factory/.xrefresh.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "xrefresh"

Sat Apr  7 20:50:07 2018 rev:7 rq:593604 version:1.0.6

Changes:
--------
--- /work/SRC/openSUSE:Factory/xrefresh/xrefresh.changes        2013-06-25 
14:47:35.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.xrefresh.new/xrefresh.changes   2018-04-07 
20:50:10.881321958 +0200
@@ -1,0 +2,12 @@
+Wed Apr  4 16:34:01 UTC 2018 - sndir...@suse.com
+
+- Update to version 1.0.6
+  * configure: Drop AM_MAINTAINER_MODE
+  * autogen.sh: Honor NOCONFIGURE=1
+  * Print which option was in error along with usage message
+  * Add -version option to print program version
+  * autogen.sh: use quoted string variables
+  * autogen: add default patch prefix
+  * autogen.sh: use exec instead of waiting for configure to finish
+
+-------------------------------------------------------------------

Old:
----
  xrefresh-1.0.5.tar.bz2

New:
----
  xrefresh-1.0.6.tar.bz2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ xrefresh.spec ++++++
--- /var/tmp/diff_new_pack.DdZx6N/_old  2018-04-07 20:50:11.485300100 +0200
+++ /var/tmp/diff_new_pack.DdZx6N/_new  2018-04-07 20:50:11.485300100 +0200
@@ -1,7 +1,7 @@
 #
 # spec file for package xrefresh
 #
-# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
 #
 # All modifications and additions to the file contributed by third parties
 # remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
 
 
 Name:           xrefresh
-Version:        1.0.5
+Version:        1.0.6
 Release:        0
 Summary:        Utility to refresh all or part of an X screen
 License:        MIT

++++++ xrefresh-1.0.5.tar.bz2 -> xrefresh-1.0.6.tar.bz2 ++++++
++++ 12333 lines of diff (skipped)
++++    retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/ChangeLog new/xrefresh-1.0.6/ChangeLog
--- old/xrefresh-1.0.5/ChangeLog        2013-05-18 03:20:35.000000000 +0200
+++ new/xrefresh-1.0.6/ChangeLog        2018-03-10 05:14:27.000000000 +0100
@@ -1,3 +1,77 @@
+commit 3900110b0ca575030b9d097349e6907ac28fe7fb
+Author: Alan Coopersmith <alan.coopersm...@oracle.com>
+Date:   Fri Mar 9 20:13:34 2018 -0800
+
+    xrefresh 1.0.6
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com>
+
+commit bccbd1905ac761c48bd3dac7e53d5bb290e066b1
+Author: Mihail Konev <k....@ya.ru>
+Date:   Thu Jan 26 14:00:21 2017 +1000
+
+    autogen: add default patch prefix
+    
+    Signed-off-by: Mihail Konev <k....@ya.ru>
+
+commit 42d40434f3203d173fef130cb2d73a272fa83449
+Author: Emil Velikov <emil.l.veli...@gmail.com>
+Date:   Mon Mar 9 12:00:52 2015 +0000
+
+    autogen.sh: use quoted string variables
+    
+    Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent
+    fall-outs, when they contain space.
+    
+    Signed-off-by: Emil Velikov <emil.l.veli...@gmail.com>
+    Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net>
+    Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
+
+commit 1300015e5b6c598826a363a84091821222c8cd6c
+Author: Peter Hutterer <peter.hutte...@who-t.net>
+Date:   Tue Jan 24 10:32:07 2017 +1000
+
+    autogen.sh: use exec instead of waiting for configure to finish
+    
+    Syncs the invocation of configure with the one from the server.
+    
+    Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
+    Reviewed-by: Emil Velikov <emil.veli...@collabora.com>
+
+commit 07cbc124b54b866fa7ab40444d22bdd9018fc5b3
+Author: Alan Coopersmith <alan.coopersm...@oracle.com>
+Date:   Tue Jun 3 22:58:53 2014 -0700
+
+    Add -version option to print program version
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com>
+
+commit b02dd8658fe8c70a77f9134cd2258f423d30e6fe
+Author: Alan Coopersmith <alan.coopersm...@oracle.com>
+Date:   Tue Jun 3 22:55:51 2014 -0700
+
+    Print which option was in error along with usage message
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com>
+
+commit 2bd2999a3e10e06ad92221dbefeac3be3d437f4f
+Author: Alan Coopersmith <alan.coopersm...@oracle.com>
+Date:   Tue Jun 3 22:47:06 2014 -0700
+
+    autogen.sh: Honor NOCONFIGURE=1
+    
+    See http://people.gnome.org/~walters/docs/build-api.txt
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com>
+
+commit 0716f5bb4d9dce062edc6eb335c15666a4129d78
+Author: Alan Coopersmith <alan.coopersm...@oracle.com>
+Date:   Tue Jun 3 22:47:06 2014 -0700
+
+    configure: Drop AM_MAINTAINER_MODE
+    
+    Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com>
+
 commit 2c08f5dee8b3f2d2da9db8e3c1d4593a66db401e
 Author: Alan Coopersmith <alan.coopersm...@oracle.com>
 Date:   Fri May 17 18:20:13 2013 -0700
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/INSTALL new/xrefresh-1.0.6/INSTALL
--- old/xrefresh-1.0.5/INSTALL  2013-05-18 03:20:35.000000000 +0200
+++ new/xrefresh-1.0.6/INSTALL  2018-03-10 05:14:27.000000000 +0100
@@ -1,11 +1,13 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
 
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
 
 Basic Installation
 ==================
@@ -13,7 +15,11 @@
    Briefly, the shell commands `./configure; make; make install' should
 configure, build, and install this package.  The following
 more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -42,7 +48,7 @@
 you want to change it or regenerate `configure' using a newer version
 of `autoconf'.
 
-The simplest way to compile this package is:
+   The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
      `./configure' to configure the package for your system.
@@ -53,12 +59,22 @@
   2. Type `make' to compile the package.
 
   3. Optionally, type `make check' to run any self-tests that come with
-     the package.
+     the package, generally using the just-built uninstalled binaries.
 
   4. Type `make install' to install the programs and any data files and
-     documentation.
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
 
-  5. You can remove the program binaries and object files from the
+  6. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
@@ -67,8 +83,15 @@
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  6. Often, you can also type `make uninstall' to remove the installed
-     files again.
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
 
 Compilers and Options
 =====================
@@ -93,7 +116,8 @@
 own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
 
    With a non-GNU `make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
@@ -120,7 +144,8 @@
    By default, `make install' installs the package's commands under
 `/usr/local/bin', include files under `/usr/local/include', etc.  You
 can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
@@ -131,15 +156,46 @@
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
 
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-Optional Features
-=================
-
    Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
 Particular systems
 ==================
 
@@ -159,10 +222,15 @@
 CC is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
-     ./configure CC="cc -Ae"
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
+   HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved.  Use GNU `make'
+instead.
+
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
 parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
 a workaround.  If GNU CC is not installed, it is therefore recommended
@@ -174,6 +242,16 @@
 
      ./configure CC="cc -nodtk"
 
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
@@ -189,7 +267,8 @@
 
 where SYSTEM can have one of these forms:
 
-     OS KERNEL-OS
+     OS
+     KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
@@ -277,7 +356,7 @@
      `configure' can determine that directory automatically.
 
 `--prefix=DIR'
-     Use DIR as the installation prefix.  *Note Installation Names::
+     Use DIR as the installation prefix.  *note Installation Names::
      for more details, including other options available for fine-tuning
      the installation locations.
 
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/compile new/xrefresh-1.0.6/compile
--- old/xrefresh-1.0.5/compile  1970-01-01 01:00:00.000000000 +0100
+++ new/xrefresh-1.0.6/compile  2018-03-10 05:14:22.000000000 +0100
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tro...@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-autom...@gnu.org> or send patches to
+# <automake-patc...@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""       $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+       # lazily determine how to convert abs files
+       case `uname -s` in
+         MINGW*)
+           file_conv=mingw
+           ;;
+         CYGWIN*)
+           file_conv=cygwin
+           ;;
+         *)
+           file_conv=wine
+           ;;
+       esac
+      fi
+      case $file_conv/,$2, in
+       *,$file_conv,*)
+         ;;
+       mingw/*)
+         file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+         ;;
+       cygwin/*)
+         file=`cygpath -m "$file" || echo "$file"`
+         ;;
+       wine/*)
+         file=`winepath -w "$file" || echo "$file"`
+         ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+       -o)
+         # configure might choose to run compile as 'compile cc -o foo foo.c'.
+         eat=1
+         case $2 in
+           *.o | *.[oO][bB][jJ])
+             func_file_conv "$2"
+             set x "$@" -Fo"$file"
+             shift
+             ;;
+           *)
+             func_file_conv "$2"
+             set x "$@" -Fe"$file"
+             shift
+             ;;
+         esac
+         ;;
+       -I)
+         eat=1
+         func_file_conv "$2" mingw
+         set x "$@" -I"$file"
+         shift
+         ;;
+       -I*)
+         func_file_conv "${1#-I}" mingw
+         set x "$@" -I"$file"
+         shift
+         ;;
+       -l)
+         eat=1
+         func_cl_dashl "$2"
+         set x "$@" "$lib"
+         shift
+         ;;
+       -l*)
+         func_cl_dashl "${1#-l}"
+         set x "$@" "$lib"
+         shift
+         ;;
+       -L)
+         eat=1
+         func_cl_dashL "$2"
+         ;;
+       -L*)
+         func_cl_dashL "${1#-L}"
+         ;;
+       -static)
+         shared=false
+         ;;
+       -Wl,*)
+         arg=${1#-Wl,}
+         save_ifs="$IFS"; IFS=','
+         for flag in $arg; do
+           IFS="$save_ifs"
+           linker_opts="$linker_opts $flag"
+         done
+         IFS="$save_ifs"
+         ;;
+       -Xlinker)
+         eat=1
+         linker_opts="$linker_opts $2"
+         ;;
+       -*)
+         set x "$@" "$1"
+         shift
+         ;;
+       *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+         func_file_conv "$1"
+         set x "$@" -Tp"$file"
+         shift
+         ;;
+       *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+         func_file_conv "$1" mingw
+         set x "$@" "$file"
+         shift
+         ;;
+       *)
+         set x "$@" "$1"
+         shift
+         ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-autom...@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+       # configure might choose to run compile as 'compile cc -o foo foo.c'.
+       # So we strip '-o arg' only if arg is an object.
+       eat=1
+       case $2 in
+         *.o | *.obj)
+           ofile=$2
+           ;;
+         *)
+           set x "$@" -o "$2"
+           shift
+           ;;
+       esac
+       ;;
+      *.c)
+       cfile=$1
+       set x "$@" "$1"
+       shift
+       ;;
+      *)
+       set x "$@" "$1"
+       shift
+       ;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/configure.ac new/xrefresh-1.0.6/configure.ac
--- old/xrefresh-1.0.5/configure.ac     2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/configure.ac     2018-03-10 05:14:18.000000000 +0100
@@ -23,7 +23,7 @@
 
 # Initialize Autoconf
 AC_PREREQ([2.60])
-AC_INIT([xrefresh], [1.0.5],
+AC_INIT([xrefresh], [1.0.6],
         [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xrefresh])
 AC_CONFIG_SRCDIR([Makefile.am])
 AC_CONFIG_HEADERS([config.h])
@@ -31,7 +31,6 @@
 
 # Initialize Automake
 AM_INIT_AUTOMAKE([foreign dist-bzip2])
-AM_MAINTAINER_MODE
 
 # Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS
 m4_ifndef([XORG_MACROS_VERSION],
@@ -42,7 +41,7 @@
 AC_CHECK_FUNCS([strcasecmp])
 
 # Checks for pkg-config packages
-PKG_CHECK_MODULES(XREFRESH, [x11 xproto >= 7.0.17])
+PKG_CHECK_MODULES(XREFRESH, [x11 xproto >= 7.0.25])
 
 AC_CONFIG_FILES([
        Makefile
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/man/xrefresh.man new/xrefresh-1.0.6/man/xrefresh.man
--- old/xrefresh-1.0.5/man/xrefresh.man 2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/man/xrefresh.man 2018-03-10 05:14:18.000000000 +0100
@@ -74,6 +74,10 @@
 .B \-display \fIdisplay\fP
 This  argument  allows  you  to  specify the server and screen to
 refresh; see \fIX(__miscmansuffix__)\fP.
+.PP
+.TP 10
+.B \-version
+This argument prints the program version and exits.
 .SH X DEFAULTS
 The
 .I xrefresh
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/missing new/xrefresh-1.0.6/missing
--- old/xrefresh-1.0.5/missing  2013-05-18 03:20:25.000000000 +0200
+++ new/xrefresh-1.0.6/missing  2018-03-10 05:14:22.000000000 +0100
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -160,7 +160,7 @@
       ;;
    autom4te*)
       echo "You might have modified some maintainer files that require"
-      echo "the 'automa4te' program to be rebuilt."
+      echo "the 'autom4te' program to be rebuilt."
       program_details 'autom4te'
       ;;
     bison*|yacc*)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/xrefresh-1.0.5/xrefresh.c new/xrefresh-1.0.6/xrefresh.c
--- old/xrefresh-1.0.5/xrefresh.c       2013-05-18 03:20:19.000000000 +0200
+++ new/xrefresh-1.0.6/xrefresh.c       2018-03-10 05:14:18.000000000 +0100
@@ -69,7 +69,7 @@
 
 static char *ProgramName;
 
-static void _X_NORETURN
+static void _X_NORETURN _X_COLD
 Syntax(void)
 {
     fprintf (stderr, "usage:  %s [-options] [geometry] [display]\n\n%s",
@@ -81,11 +81,27 @@
             "    -white                  use WhitePixel\n"
             "    -solid colorname        use the color indicated\n"
             "    -root                   use the root background\n"
-            "    -none                   no background in window\n");
+            "    -none                   no background in window\n"
+            "    -version                print program version\n"
+       );
     fprintf (stderr, "\nThe default is:  %s -none\n\n", ProgramName);
     exit (1);
 }
 
+static void _X_NORETURN _X_COLD
+missing_arg(const char *arg)
+{
+    fprintf (stderr, "%s: %s requires an argument\n\n", ProgramName, arg);
+    Syntax ();
+}
+
+static void _X_NORETURN _X_COLD
+unknown_arg(const char *arg)
+{
+    fprintf (stderr, "%s: unrecognized argument %s\n\n", ProgramName, arg);
+    Syntax ();
+}
+
 /*
  * The following parses options that should be yes or no; it returns -1, 0, 1
  * for error, no, yes.
@@ -188,11 +204,11 @@
 
        if (arg[0] == '-') {
            if (isabbreviation ("-display", arg, 2)) {
-               if (++i >= argc) Syntax ();
+               if (++i >= argc) missing_arg (arg);
                displayname = argv[i];
                continue;
            } else if (isabbreviation ("-geometry", arg, 2)) {
-               if (++i >= argc) Syntax ();
+               if (++i >= argc) missing_arg (arg);
                geom = argv[i];
                continue;
            } else if (isabbreviation ("-black", arg, 2)) {
@@ -202,7 +218,7 @@
                action = doWhite;
                continue;
            } else if (isabbreviation ("-solid", arg, 2)) {
-               if (++i >= argc) Syntax ();
+               if (++i >= argc) missing_arg (arg);
                solidcolor = argv[i];
                action = doSolid;
                continue;
@@ -212,12 +228,15 @@
            } else if (isabbreviation ("-root", arg, 2)) {
                action = doRoot;
                continue;
+           } else if (isabbreviation ("-version", arg, 1)) {
+               puts(PACKAGE_STRING);
+               exit(0);
            } else 
-               Syntax ();
+               unknown_arg (arg);
        } else if (arg[0] == '=')                       /* obsolete */
            geom = arg;
        else 
-           Syntax ();
+           unknown_arg (arg);
     }
 
     if ((dpy = XOpenDisplay(displayname)) == NULL) {


Reply via email to