Hello community, here is the log from the commit of package xload for openSUSE:Factory checked in at 2018-04-19 15:26:50 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xload (Old) and /work/SRC/openSUSE:Factory/.xload.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xload" Thu Apr 19 15:26:50 2018 rev:7 rq:593597 version:1.1.3 Changes: -------- --- /work/SRC/openSUSE:Factory/xload/xload.changes 2013-08-19 10:51:59.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.xload.new/xload.changes 2018-04-19 15:27:07.104864367 +0200 @@ -1,0 +2,13 @@ +Wed Apr 4 16:12:49 UTC 2018 - [email protected] + +- Update to version 1.1.3 + * configure: Drop AM_MAINTAINER_MODE + * autogen.sh: Honor NOCONFIGURE=1 + * autogen.sh: use quoted string variables + * Use Windows load interface for Win32 build, as well as Cygwin + * Don't try to use [gs]et[ug]id on Win32 + * autogen: add default patch prefix + * autogen.sh: use exec instead of waiting for configure to finish + * Use wrapped windows header to fix compilation for Cygwin + +------------------------------------------------------------------- Old: ---- xload-1.1.2.tar.bz2 New: ---- xload-1.1.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xload.spec ++++++ --- /var/tmp/diff_new_pack.tRH5aZ/_old 2018-04-19 15:27:07.888832420 +0200 +++ /var/tmp/diff_new_pack.tRH5aZ/_new 2018-04-19 15:27:07.892832257 +0200 @@ -1,7 +1,7 @@ # # spec file for package xload # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: xload -Version: 1.1.2 +Version: 1.1.3 Release: 0 Summary: X utility to display system load average License: MIT ++++++ xload-1.1.2.tar.bz2 -> xload-1.1.3.tar.bz2 ++++++ ++++ 11965 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/ChangeLog new/xload-1.1.3/ChangeLog --- old/xload-1.1.2/ChangeLog 2013-08-04 06:43:23.000000000 +0200 +++ new/xload-1.1.3/ChangeLog 2018-03-10 02:52:57.000000000 +0100 @@ -1,3 +1,115 @@ +commit 57adc3d88856d96975479ba6a386ca1af1bc3cb8 +Author: Alan Coopersmith <[email protected]> +Date: Fri Mar 9 17:51:02 2018 -0800 + + xload 1.1.3 + + Signed-off-by: Alan Coopersmith <[email protected]> + +commit 09e23fa098ab44c5861afa0ad30032cede22e1a7 +Author: Mihail Konev <[email protected]> +Date: Thu Jan 26 14:00:21 2017 +1000 + + autogen: add default patch prefix + + Signed-off-by: Mihail Konev <[email protected]> + +commit dafec869b1040ba26aa9b7411576293cbeaef227 +Author: Emil Velikov <[email protected]> +Date: Mon Mar 9 12:00:52 2015 +0000 + + autogen.sh: use quoted string variables + + Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent + fall-outs, when they contain space. + + Signed-off-by: Emil Velikov <[email protected]> + Reviewed-by: Peter Hutterer <[email protected]> + Signed-off-by: Peter Hutterer <[email protected]> + +commit f137e5de4b21d253f5c0a475b347645145513a69 +Author: Peter Hutterer <[email protected]> +Date: Tue Jan 24 10:32:07 2017 +1000 + + autogen.sh: use exec instead of waiting for configure to finish + + Syncs the invocation of configure with the one from the server. + + Signed-off-by: Peter Hutterer <[email protected]> + Reviewed-by: Emil Velikov <[email protected]> + +commit 57e2f649e76cba9e9959ca072ba10285cd17a060 +Author: Jon TURNEY <[email protected]> +Date: Tue Apr 21 13:10:48 2015 +0100 + + Don't try to use [gs]et[ug]id on Win32 + + Signed-off-by: Jon TURNEY <[email protected]> + Reviewed-by: Alan Coopersmith <[email protected]> + Reviewed-by: David Macek <[email protected]> + +commit 3d5d39cc98b4c5cbecbc1f10db1f6c01963efa94 +Author: Jon TURNEY <[email protected]> +Date: Tue Apr 21 13:10:37 2015 +0100 + + Use Windows load interface for Win32 build, as well as Cygwin + + Signed-off-by: Jon TURNEY <[email protected]> + Reviewed-by: Alan Coopersmith <[email protected]> + Reviewed-by: David Macek <[email protected]> + +commit 5c74908c5abe5f91651e78b291ef7e1d02cca25a +Author: Alan Coopersmith <[email protected]> +Date: Sat May 31 22:14:29 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith <[email protected]> + +commit 9d036c3cb4c1e777ed65dfb9c59db6ec9229e6f5 +Author: Alan Coopersmith <[email protected]> +Date: Sat May 31 22:14:29 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith <[email protected]> + +commit 23f4a318f3df9823aa2076616a7a06b3972e8d6b +Author: Yaakov Selkowitz <[email protected]> +Date: Wed Dec 18 18:07:47 2013 +0000 + + Use wrapped windows header to fix compilation for Cygwin + + xload uses a windows-specific interface to obtain the load average, as + getloadavg() is not implemented for Cygwin. + + Including some versions of windows.h after including X11 headers can lead to + compilation errors as 'Status' is used as a type name in Xlib.h, but a parameter + or memeber name in Windows headers. + + Include X11/Xwindows.h rather than windows.h directly, which wraps it in a such + way to avoid any conflict with X11 headers. + + In file included from /usr/include/w32api/minwindef.h:146:0, + from /usr/include/w32api/windef.h:8, + from /usr/include/w32api/windows.h:69, + from /jhbuild/checkout/xorg/app/xload/get_load.c:53: + /usr/include/w32api/winnt.h:4951:15: error: two or more data types in declaration specifiers + DWORD64 Status; + ^ + In file included from /usr/include/w32api/minwindef.h:146:0, + from /usr/include/w32api/windef.h:8, + from /usr/include/w32api/windows.h:69, + from /jhbuild/checkout/xorg/app/xload/get_load.c:53: + /usr/include/w32api/winnt.h:5090:13: error: two or more data types in declaration specifiers + DWORD Status; + ^ + + Signed-off-by: Yaakov Selkowitz <[email protected]> + Reviewed-by: Jon TURNEY <[email protected]> + commit 0705cf954e2d92b379493accd1f0f984d87ec575 Author: Alan Coopersmith <[email protected]> Date: Sat Aug 3 21:42:59 2013 -0700 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/INSTALL new/xload-1.1.3/INSTALL --- old/xload-1.1.2/INSTALL 2013-08-04 06:43:23.000000000 +0200 +++ new/xload-1.1.3/INSTALL 2018-03-10 02:52:57.000000000 +0100 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/compile new/xload-1.1.3/compile --- old/xload-1.1.2/compile 2013-08-04 06:43:12.000000000 +0200 +++ new/xload-1.1.3/compile 2018-03-10 02:52:51.000000000 +0100 @@ -3,7 +3,7 @@ scriptversion=2012-10-14.11; # UTC -# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # Written by Tom Tromey <[email protected]>. # # This program is free software; you can redistribute it and/or modify diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/configure.ac new/xload-1.1.3/configure.ac --- old/xload-1.1.2/configure.ac 2013-08-04 06:43:06.000000000 +0200 +++ new/xload-1.1.3/configure.ac 2018-03-10 02:52:46.000000000 +0100 @@ -23,7 +23,7 @@ # Initialize Autoconf AC_PREREQ([2.60]) -AC_INIT([xload], [1.1.2], +AC_INIT([xload], [1.1.3], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xload]) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_SRCDIR([Makefile.am]) @@ -32,7 +32,6 @@ # Initialize Automake AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS m4_ifndef([XORG_MACROS_VERSION], diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/get_load.c new/xload-1.1.3/get_load.c --- old/xload-1.1.2/get_load.c 2013-08-04 06:43:06.000000000 +0200 +++ new/xload-1.1.3/get_load.c 2018-03-10 02:52:46.000000000 +0100 @@ -48,9 +48,9 @@ #include <stdlib.h> #include "xload.h" -#if defined(__CYGWIN__) +#if defined(__CYGWIN__) || defined(_WIN32) # define WIN32_LEAN_AND_MEAN -# include <windows.h> +# include <X11/Xwindows.h> typedef struct { DWORD stat; union { diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/get_rload.c new/xload-1.1.3/get_rload.c --- old/xload-1.1.2/get_rload.c 2013-08-04 06:43:06.000000000 +0200 +++ new/xload-1.1.3/get_rload.c 2018-03-10 02:52:46.000000000 +0100 @@ -9,7 +9,7 @@ /* Not all OS supports get_rload steal the STUB idea from get_load */ -#if defined(QNX4) || defined(__CYGWIN__) +#if defined(QNX4) || defined(__CYGWIN__) || defined(_WIN32) #define RLOADSTUB #endif diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/missing new/xload-1.1.3/missing --- old/xload-1.1.2/missing 2013-08-04 06:43:12.000000000 +0200 +++ new/xload-1.1.3/missing 2018-03-10 02:52:51.000000000 +0100 @@ -1,9 +1,9 @@ #! /bin/sh # Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-06-26.16; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <[email protected]>, 1996. # This program is free software; you can redistribute it and/or modify @@ -160,7 +160,7 @@ ;; autom4te*) echo "You might have modified some maintainer files that require" - echo "the 'automa4te' program to be rebuilt." + echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xload-1.1.2/xload.c new/xload-1.1.3/xload.c --- old/xload-1.1.2/xload.c 2013-08-04 06:43:06.000000000 +0200 +++ new/xload-1.1.3/xload.c 2018-03-10 02:52:46.000000000 +0100 @@ -178,6 +178,8 @@ /* For security reasons, we reset our uid/gid after doing the necessary system initialization and before calling any X routines. */ InitLoadPoint(); + +#if !defined(_WIN32) || defined(__CYGWIN__) /* reset gid first while still (maybe) root */ if (setgid(getgid()) == -1) { fprintf(stderr, gettext("%s: setgid failed: %s\n"), @@ -189,6 +191,7 @@ ProgramName, strerror(errno)); exit(1); } +#endif XtSetLanguageProc(NULL, (XtLanguageProc) NULL, NULL);
