Hello community, here is the log from the commit of package xfontsel for openSUSE:Factory checked in at 2018-04-19 15:28:09 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xfontsel (Old) and /work/SRC/openSUSE:Factory/.xfontsel.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xfontsel" Thu Apr 19 15:28:09 2018 rev:8 rq:593594 version:1.0.6 Changes: -------- --- /work/SRC/openSUSE:Factory/xfontsel/xfontsel.changes 2014-02-07 11:56:38.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xfontsel.new/xfontsel.changes 2018-04-19 15:28:10.710269662 +0200 @@ -1,0 +2,14 @@ +Wed Apr 4 16:00:26 UTC 2018 - sndir...@suse.com + +- Update to version 1.0.6 + * Drop CRAY/WORD64 support (unifdef -UCRAY -UWORD64) + * Replace TXT16 with XChar2b inline + * config: Add missing AC_CONFIG_SRCDIR + * configure: Drop AM_MAINTAINER_MODE + * autogen.sh: Honor NOCONFIGURE=1 + * Get rid of some extraneous ; at the end of C source lines + * autogen.sh: use quoted string variables + * autogen: add default patch prefix + * autogen.sh: use exec instead of waiting for configure to finish + +------------------------------------------------------------------- Old: ---- xfontsel-1.0.5.tar.bz2 New: ---- xfontsel-1.0.6.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xfontsel.spec ++++++ --- /var/tmp/diff_new_pack.s5VJtX/_old 2018-04-19 15:28:11.378242383 +0200 +++ /var/tmp/diff_new_pack.s5VJtX/_new 2018-04-19 15:28:11.382242220 +0200 @@ -1,7 +1,7 @@ # # spec file for package xfontsel # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: xfontsel -Version: 1.0.5 +Version: 1.0.6 Release: 0 Summary: Utility to display X11 font names License: X11 ++++++ xfontsel-1.0.5.tar.bz2 -> xfontsel-1.0.6.tar.bz2 ++++++ ++++ 12379 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/ChangeLog new/xfontsel-1.0.6/ChangeLog --- old/xfontsel-1.0.5/ChangeLog 2013-05-18 03:01:12.000000000 +0200 +++ new/xfontsel-1.0.6/ChangeLog 2018-03-10 02:31:34.000000000 +0100 @@ -1,3 +1,99 @@ +commit a98ec351f665d12b0f0aa26dddeaf7a33423ffd1 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Fri Mar 9 17:30:13 2018 -0800 + + xfontsel 1.0.6 + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 693cff8fc6a63b51fb059d175af5f602d5771648 +Author: Mihail Konev <k....@ya.ru> +Date: Thu Jan 26 14:00:21 2017 +1000 + + autogen: add default patch prefix + + Signed-off-by: Mihail Konev <k....@ya.ru> + +commit 32813ab5133d18e230c37ba562275735bda35ec7 +Author: Emil Velikov <emil.l.veli...@gmail.com> +Date: Mon Mar 9 12:00:52 2015 +0000 + + autogen.sh: use quoted string variables + + Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent + fall-outs, when they contain space. + + Signed-off-by: Emil Velikov <emil.l.veli...@gmail.com> + Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net> + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + +commit 0a1e1adb405c005d5382eca48f5e2f811ec4b1e9 +Author: Peter Hutterer <peter.hutte...@who-t.net> +Date: Tue Jan 24 10:32:07 2017 +1000 + + autogen.sh: use exec instead of waiting for configure to finish + + Syncs the invocation of configure with the one from the server. + + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + Reviewed-by: Emil Velikov <emil.veli...@collabora.com> + +commit 8e4343b9a13a15a8d210ac9454670680f60b3cc6 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sun Sep 27 18:51:10 2015 -0700 + + Get rid of some extraneous ; at the end of C source lines + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 3b4d735abfadabe120d4d3fb62a5fb5483a9aa0e +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Mon Jun 2 22:34:36 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit e41d309cfa1812d3d617dfc21e310361c741a8af +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Mon Jun 2 22:34:36 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 5ded8c9f5eeefba1a13a73f39f03db155faa5a8c +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Mon Jun 2 22:34:30 2014 -0700 + + config: Add missing AC_CONFIG_SRCDIR + + Regroup AC statements under the Autoconf initialization section. + Regroup AM statements under the Automake initialization section. + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 4cc04b8ba83f64aa142fdedf632f55fbe429d763 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat Jul 6 00:07:23 2013 -0700 + + Replace TXT16 with XChar2b inline + + No longer need #define to substitute it now that we no longer set + it to a different type on CRAY systems. + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit b655a65ff7915b0c55a214b3a23b7f0fa1a39f44 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat Jul 6 00:04:41 2013 -0700 + + Drop CRAY/WORD64 support (unifdef -UCRAY -UWORD64) + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + commit f8aaa4ffae00fd97a393d2589f9c9579b5bac5ad Author: Alan Coopersmith <alan.coopersm...@oracle.com> Date: Fri May 17 18:00:41 2013 -0700 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/INSTALL new/xfontsel-1.0.6/INSTALL --- old/xfontsel-1.0.5/INSTALL 2013-05-18 03:01:12.000000000 +0200 +++ new/xfontsel-1.0.6/INSTALL 2018-03-10 02:31:34.000000000 +0100 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/ULabel.c new/xfontsel-1.0.6/ULabel.c --- old/xfontsel-1.0.5/ULabel.c 2013-05-18 03:00:51.000000000 +0200 +++ new/xfontsel-1.0.6/ULabel.c 2018-03-10 02:31:25.000000000 +0100 @@ -67,9 +67,6 @@ #define MULTI_LINE_LABEL 32767 -#ifdef CRAY -#define WORD64 -#endif /**************************************************************** * @@ -179,52 +176,6 @@ static XChar2b *buf2b; static int buf2blen = 0; -#ifndef WORD64 - -#define TXT16 XChar2b - -#else - -#define TXT16 char - -static int _XawLabelWidth16(XFontStruct *fs, char *str, int n) -{ - int i; - XChar2b *ptr; - - if (n > buf2blen) { - buf2b = (XChar2b *)XtRealloc((char *)buf2b, n * sizeof(XChar2b)); - buf2blen = n; - } - for (ptr = buf2b, i = n; --i >= 0; ptr++) { - ptr->byte1 = *str++; - ptr->byte2 = *str++; - } - return XTextWidth16(fs, buf2b, n); -} - -static void _XawLabelDraw16(Display *dpy, Drawable d, GC gc, - int x, int y, char *str, int n) -{ - int i; - XChar2b *ptr; - - if (n > buf2blen) { - buf2b = (XChar2b *)XtRealloc((char *)buf2b, n * sizeof(XChar2b)); - buf2blen = n; - } - for (ptr = buf2b, i = n; --i >= 0; ptr++) { - ptr->byte1 = *str++; - ptr->byte2 = *str++; - } - XDrawString16(dpy, d, gc, x, y, buf2b, n); -} - -#define XTextWidth16 _XawLabelWidth16 -#define XDrawString16 _XawLabelDraw16 - -#endif /* WORD64 */ - static void _XawLabelDrawUCS(Display *dpy, Drawable d, GC gc, int x, int y, char *str, int n) { @@ -255,7 +206,7 @@ codepoint=(unsigned)'?'; str++; } - ptr->byte1 = (codepoint >> 8) & 0xff;; + ptr->byte1 = (codepoint >> 8) & 0xff; ptr->byte2 = codepoint & 0xff; } XDrawString16(dpy, d, gc, x, y, buf2b, ptr - buf2b); @@ -294,7 +245,7 @@ codepoint=(unsigned)'?'; str++; } - ptr->byte1 = (codepoint >> 8) & 0xff;; + ptr->byte1 = (codepoint >> 8) & 0xff; ptr->byte2 = codepoint & 0xff; } return XTextWidth16(fs, buf2b, ptr - buf2b); @@ -376,7 +327,7 @@ int width; if (lw->label.encoding == XawTextEncodingChar2b) - width = XTextWidth16(fs, (TXT16*)label, (int)(nl - label)/2); + width = XTextWidth16(fs, (XChar2b *)label, (int)(nl - label)/2); else if (lw->label.encoding == XawTextEncodingUCS) width = XTextWidthUCS(fs, label, nl - label); else @@ -392,7 +343,7 @@ int width; if (lw->label.encoding == XawTextEncodingChar2b) - width = XTextWidth16(fs, (TXT16*)label, (int)strlen(label)/2); + width = XTextWidth16(fs, (XChar2b *)label, (int)strlen(label)/2); else if (lw->label.encoding == XawTextEncodingUCS) width = XTextWidthUCS(fs, label, strlen(label)); else @@ -404,7 +355,7 @@ lw->label.label_len = strlen(lw->label.label); if (lw->label.encoding == XawTextEncodingChar2b) lw->label.label_width = - XTextWidth16(fs, (TXT16*)lw->label.label, + XTextWidth16(fs, (XChar2b *)lw->label.label, (int) lw->label.label_len/2); else if (lw->label.encoding == XawTextEncodingUCS) lw->label.label_width = XTextWidthUCS(fs, lw->label.label, @@ -610,7 +561,7 @@ if (w->label.encoding == XawTextEncodingChar2b) XDrawString16(XtDisplay(gw), XtWindow(gw), gc, w->label.label_x, y, - (TXT16*)label, (int)(nl - label)/2); + (XChar2b *)label, (int)(nl - label)/2); else if (w->label.encoding == XawTextEncodingUCS) XDrawStringUCS(XtDisplay(gw), XtWindow(gw), gc, w->label.label_x, y, label, (int)(nl - label)); @@ -626,7 +577,7 @@ if (len) { if (w->label.encoding == XawTextEncodingChar2b) XDrawString16(XtDisplay(gw), XtWindow(gw), gc, - w->label.label_x, y, (TXT16*)label, len/2); + w->label.label_x, y, (XChar2b *)label, len/2); else if (w->label.encoding == XawTextEncodingUCS) XDrawStringUCS(XtDisplay(gw), XtWindow(gw), gc, w->label.label_x, y, label, len); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/compile new/xfontsel-1.0.6/compile --- old/xfontsel-1.0.5/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/xfontsel-1.0.6/compile 2018-03-10 02:31:29.000000000 +0100 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey <tro...@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-autom...@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/configure.ac new/xfontsel-1.0.6/configure.ac --- old/xfontsel-1.0.5/configure.ac 2013-05-18 03:00:51.000000000 +0200 +++ new/xfontsel-1.0.6/configure.ac 2018-03-10 02:31:25.000000000 +0100 @@ -21,11 +21,15 @@ dnl dnl Process this file with autoconf to create configure. +# Initialize Autoconf AC_PREREQ([2.60]) -AC_INIT([xfontsel], [1.0.5], +AC_INIT([xfontsel], [1.0.6], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xfontsel]) +AC_CONFIG_SRCDIR([Makefile.am]) +AC_CONFIG_HEADERS([config.h]) + +# Initialize Automake AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS m4_ifndef([XORG_MACROS_VERSION], @@ -33,8 +37,6 @@ XORG_MACROS_VERSION(1.8) XORG_DEFAULT_OPTIONS -AC_CONFIG_HEADERS([config.h]) - PKG_CHECK_MODULES(XFONTSEL, xaw7 xmu xt x11) PKG_CHECK_MODULES(APPDEFS, xt) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xfontsel-1.0.5/missing new/xfontsel-1.0.6/missing --- old/xfontsel-1.0.5/missing 2013-05-18 03:00:57.000000000 +0200 +++ new/xfontsel-1.0.6/missing 2018-03-10 02:31:29.000000000 +0100 @@ -1,9 +1,9 @@ #! /bin/sh # Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-06-26.16; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -160,7 +160,7 @@ ;; autom4te*) echo "You might have modified some maintainer files that require" - echo "the 'automa4te' program to be rebuilt." + echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*)