Hello community, here is the log from the commit of package kdump for openSUSE:Factory checked in at 2018-04-26 13:34:30 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/kdump (Old) and /work/SRC/openSUSE:Factory/.kdump.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "kdump" Thu Apr 26 13:34:30 2018 rev:98 rq:599443 version:0.8.16 Changes: -------- --- /work/SRC/openSUSE:Factory/kdump/kdump.changes 2018-04-07 20:55:07.670580126 +0200 +++ /work/SRC/openSUSE:Factory/.kdump.new/kdump.changes 2018-04-26 13:34:32.887739170 +0200 @@ -1,0 +2,8 @@ +Fri Apr 20 16:06:40 UTC 2018 - [email protected] + +- kdump-additional-mounts-in-dracut-module.patch: Handle additional + mounts in the kdump dracut module (bsc#1089917). +- kdump-run-mkinitrd-if-fadump-is-active.patch: Run mkinitrd if + fadump is active (bsc#1089917). + +------------------------------------------------------------------- New: ---- kdump-additional-mounts-in-dracut-module.patch kdump-run-mkinitrd-if-fadump-is-active.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ kdump.spec ++++++ --- /var/tmp/diff_new_pack.62fPnB/_old 2018-04-26 13:34:34.259688899 +0200 +++ /var/tmp/diff_new_pack.62fPnB/_new 2018-04-26 13:34:34.259688899 +0200 @@ -96,6 +96,8 @@ Patch47: %{name}-pass-all-IP-routes-to-kdump-environment.patch Patch48: %{name}-remove-IPv6-brackets-for-getaddrinfo.patch Patch49: %{name}-skip-IPv4-if-no-address.patch +Patch50: %{name}-additional-mounts-in-dracut-module.patch +Patch51: %{name}-run-mkinitrd-if-fadump-is-active.patch BuildRequires: asciidoc BuildRequires: cmake BuildRequires: gcc-c++ @@ -207,6 +209,8 @@ %patch47 -p1 %patch48 -p1 %patch49 -p1 +%patch50 -p1 +%patch51 -p1 %build export CFLAGS="%{optflags}" ++++++ kdump-additional-mounts-in-dracut-module.patch ++++++ From: Petr Tesarik <[email protected]> Date: Fri, 20 Apr 2018 17:26:22 +0200 Subject: Handle additional mounts in the kdump dracut module References: bsc#1089917 Upstream: merged Git-commit: bd3cc31f3b91e81e6acc00f314142bbda9ace495 This change is needed to fix FADUMP, because in that case the kdump initrd is also used during normal boot, so it can get overwritten with an invocation of "mkinitrd". Currently, dracut does not provide an API to add more mounts from a module, so part of the logic which sets up host devices and filesystem mappings must be copied to the kdump module. The approach is not clean, but probably still better than passing some variables from mkdumprd to the kdump dracut module through environment variables, which was done before. Yes, this means that the ugly export/import functions can be removed and forgotten. Signed-off-by: Petr Tesarik <[email protected]> --- init/mkdumprd | 14 -------- init/module-setup.sh | 75 +++++++++++++++++++++++++++++++++++++-------- init/setup-kdump.functions | 53 ------------------------------- 3 files changed, 62 insertions(+), 80 deletions(-) --- a/init/mkdumprd +++ b/init/mkdumprd @@ -128,20 +128,6 @@ function run_dracut() KERNELVERSION=$(get_kernel_version "$KERNEL") fi - # add mount points - kdump_get_mountpoints || return 1 - i=0 - while [ $i -lt ${#kdump_mnt[@]} ] - do - if [ -n "${kdump_mnt[i]}" ] ; then - DRACUT_ARGS="$DRACUT_ARGS --mount '${kdump_dev[i]} ${kdump_mnt[i]} ${kdump_fstype[i]} ${kdump_opts[i]}'" - fi - i=$((i+1)) - done - - # Make resolved variables visible to the dracut module - kdump_export_targets - DRACUT_ARGS="$DRACUT_ARGS --add 'kdump' $INITRD $KERNELVERSION" echo "Regenerating kdump initrd ..." >&2 eval "bash -$- $DRACUT $DRACUT_ARGS" --- a/init/module-setup.sh +++ b/init/module-setup.sh @@ -45,10 +45,71 @@ kdump_check_net() { kdump_ifname_config "$kdump_host_if" } +kdump_get_fs_type() { + local _dev="/dev/block/$1" + local _fstype + if [ -b "$_dev" ] && _fstype=$(get_fs_env "$_dev") ; then + host_fs_types["$(readlink -f "$_dev")"]="$_fstype" + elif _fstype=$(find_dev_fstype "$_dev"); then + host_fs_types["$_dev"]="$_fstype" + fi + return 1 +} + +kdump_add_host_dev() { + local _dev=$1 + [[ " ${host_devs[@]} " == *" $_dev "* ]] && return + host_devs+=( "$_dev" ) + check_block_and_slaves_all kdump_get_fs_type "$(get_maj_min "$_dev")" +} + +kdump_add_mnt() { + local _idx=$1 + local _dev="${kdump_dev[_idx]}" + local _mp="${kdump_mnt[_idx]}" + + # Convert system root mounts to bind mounts + if [ "$KDUMP_FADUMP" = "yes" -a "${_mp%/*}" = "/kdump" ] ; then + mkdir -p "$initdir/etc" + echo "/sysroot $_mp none bind 0 0" >> "$initdir/etc/fstab" + return + fi + + case "$_dev" in + UUID=*|LABEL=*|PARTUUID=*|PARTLABLE=*) + _dev=$(blkid -l -t "$_dev" -o device) + ;; + esac + kdump_add_host_dev "$_dev" + host_fs_types["$_dev"]="${kdump_fstype[_idx]}" + if [ "${kdump_fstype[_idx]}" = btrfs ] ; then + for _dev in $() ; do + kdump_add_host_dev "$_dev" + done + fi + + mkdir -p "$initdir/etc" + local _passno=2 + [ "${kdump_fstype[_idx]}" = nfs ] && _passno=0 + echo "${kdump_dev[_idx]} ${kdump_mnt[_idx]} ${kdump_fstype[_idx]} ${kdump_opts[_idx]} 0 $_passno" >> "$initdir/etc/fstab" +} + check() { # Get configuration - kdump_import_targets || return 1 kdump_get_config || return 1 + + # add mount points + if ! [[ $mount_needs ]] ; then + kdump_get_mountpoints || return 1 + + local _i=0 + while [ $_i -lt ${#kdump_mnt[@]} ] + do + [ -n "${kdump_mnt[_i]}" ] && kdump_add_mnt $_i + _i=$((_i+1)) + done + fi + kdump_check_net return 255 @@ -188,18 +249,6 @@ install() { kdump_map_mpath_wwid for_each_host_dev_and_slaves_all kdump_add_mpath_dev - # Convert system root mounts to bind mounts - if [ "$KDUMP_FADUMP" = "yes" ] ; then - local i line - for i in "${!fstab_lines[@]}" - do - line=( ${fstab_lines[i]} ) - if [ "${line[1]%/*}" = "/kdump" ] ; then - fstab_lines[i]="/sysroot ${line[1]} none bind 0 0" - fi - done - fi - kdump_setup_files "$initdir" "$kdump_mpath_wwids" inst_hook cmdline 50 "$moddir/kdump-root.sh" --- a/init/setup-kdump.functions +++ b/init/setup-kdump.functions @@ -666,59 +666,6 @@ function kdump_get_targets() # { } # }}} # -# Print array content so that it can be used as bash input -# -# Parameters: -# 1) name array variable to be printed -# Output: -# shell code that can be passed to eval to restore the array -function kdump_print_array() -{ - local name="$1" - local i - echo -n "( " - for i in $(eval printf \"%q \" \"\${!$name[@]}\") - do - printf "[%s]=%q " "$i" "$(eval echo \"\${$name[i]}\")" - done - echo ")" -} - -# -# Export kdump_*[] arrays, returned by kdump_get_targets. -# -# Input variables: -# kdump_URL[], kdump_Protocol[], kdump_Host[], kdump_Realpath, -# kdump_mnt[] -# Output variables (exported): -# KDUMP_x_URL, KDUMP_x_Protocol, KDUMP_x_Host, KDUMP_x_Realpath, -# KDUMP_x_mnt -function kdump_export_targets() # {{{ -{ - export KDUMP_x_URL=$( kdump_print_array kdump_URL ) - export KDUMP_x_Protocol=$( kdump_print_array kdump_Protocol ) - export KDUMP_x_Host=$( kdump_print_array kdump_Host ) - export KDUMP_x_Realpath=$( kdump_print_array kdump_Realpath ) - export KDUMP_x_mnt=$( kdump_print_array kdump_mnt ) - export kdump_max -} # }}} - -# -# Import kdump_*[] arrays from environment. -# -# Input/Output Variables: -# reverse of kdump_export_arrays -function kdump_import_targets() # {{{ -{ - eval "kdump_URL=$KDUMP_x_URL" - eval "kdump_Protocol=$KDUMP_x_Protocol" - eval "kdump_Host=$KDUMP_x_Host" - eval "kdump_Realpath=$KDUMP_x_Realpath" - eval "kdump_mnt=$KDUMP_x_mnt" - test ${#kdump_URL[@]} -gt 0 -} # }}} - -# # Read and normalize /etc/fstab and /proc/mounts (if exists). # The following transformations are done: # - initial TABs and SPACEs are removed ++++++ kdump-run-mkinitrd-if-fadump-is-active.patch ++++++ From: Petr Tesarik <[email protected]> Date: Fri, 20 Apr 2018 17:54:19 +0200 Subject: Run mkinitrd if fadump is active References: bsc#1089917 Upstream: merged Git-commit: a25562cb0ff7d2b6d6df2dded8bd29c2e4d7e9ea With fadump, the default initrd is used. It is better to call the normal mkinitrd script to achieve consistent behaviour between updates triggered by kdump and other changes that may require a rebuild of the initrd. Signed-off-by: Petr Tesarik <[email protected]> --- init/mkdumprd | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) --- a/init/mkdumprd +++ b/init/mkdumprd @@ -117,6 +117,25 @@ function run_mkinitrd() } # }}} # +# Create a new fadump initrd using mkinitrd {{{ +function run_mkinitrd_fadump() +{ + # With fadump, we have no control over which kernel will be booted + # to save the dump, so do not add any versions here. + MKINITRD_ARGS="" + + # + # if -q is specified, don't print mkinitrd output + if (( $QUIET )) ; then + MKINITRD_ARGS="$MKINITRD_ARGS &>/dev/null" + fi + + status_message "Calling mkinitrd $MKINITRD_ARGS" + echo "Regenerating initrd ..." >&2 + eval "bash -$- /sbin/mkinitrd $MKINITRD_ARGS" +} # }}} + +# # Create a new initrd using dracut {{{ function run_dracut() { @@ -219,7 +238,11 @@ if (( ! $FORCE )) ; then fi if [ -e $DRACUT ] ; then - run_dracut + if [ "$KDUMP_FADUMP" = "yes" ] ; then + run_mkinitrd_fadump + else + run_dracut + fi ret=$? else run_mkinitrd
