Hello community, here is the log from the commit of package DisplayCAL for openSUSE:Factory checked in at 2018-08-08 14:53:53 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/DisplayCAL (Old) and /work/SRC/openSUSE:Factory/.DisplayCAL.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "DisplayCAL" Wed Aug 8 14:53:53 2018 rev:22 rq:627935 version:3.6.1.1 Changes: -------- --- /work/SRC/openSUSE:Factory/DisplayCAL/DisplayCAL.changes 2018-06-22 13:36:10.512893890 +0200 +++ /work/SRC/openSUSE:Factory/.DisplayCAL.new/DisplayCAL.changes 2018-08-08 14:54:46.441676257 +0200 @@ -1,0 +2,76 @@ +Tue Aug 07 16:15:26 UTC 2018 - [email protected] + +- Update to 3.6.1.1: + * [Minor]: Don't call setlocale() unconditionally, and restore + previous locale (fixes build under non-english locales, + regression of XDG changes in DisplayCAL 3.6.1, SVN revision + 5457 and up). + +------------------------------------------------------------------- +Mon Aug 06 14:04:17 UTC 2018 - [email protected] + +- Update to 3.6.1: + * [Feature] Adjustable hue preservation (values less than 100% + will gradually hue shift very bright and saturated + redorange/orange/yellowgreen hues to a more yellowish tone, + preserving more saturation and detail) for HDR SMPTE 2084 3D + LUTs with roll-off tonemapping (default 50%). + * [Feature] Ability to set a calibration target luminance by + measuring the ambient light level. + * [Feature] Verification tab: Hold the “alt” key on your keyboard + to create a profile or device link (3D LUT) self check report + instead of a measurement report. + * [Enhancement] DCI P3 D65 profile for use as 3D LUT source + colorspace or measurement report simulation profile. + * [Enhancement] Increased the default number of patches for the + madVR HDR preset back to 425. + * [Enhancement] HDR 3D LUT SMPTE 2084 tonemapping: Restored near + black tone reproduction for displays with non-zero black level + and output offset less than 100% to pre-v3.6 values. + * [Enhancement] Improved HDR 3D LUT SMPTE 2084 tonemapping speed. + * [Enhancement] Improved HDR 3D LUT accuracy for colorimetric + rendering intents. + * [Enhancement] Increased default display update delay for + Resolve preset to 1000 ms. + * [Enhancement] Quantize Autodesk/Kodak (.3dl) 3D LUT values by + always rounding up (match the format specification in the + Lustre user guide). + * [Enhancement] Limit the number of concurrent worker processes + depending on system memory to avoid swapping. + * [Enhancement] Always normalize CGATS data to Y = 100 when + processing files not created by DisplayCAL. + * [Enhancement] Get the black level for computation of 3D LUT or + verification target tone curves from the embedded + characterization data if a lookup through the display profile + returns zero (makes e.g. Rec. 1886 work properly in that case). + * [Enhancement] Synthetic ICC profile creator: Increase number of + decimal digits for black level to 6 and do not clamp to 16-bit + integer values to offer more fine grained control. + * [Enhancement]: Use configured XDG “well known” user directories + (currently only used to determine the localized name of the + “Downloads” directory). + * [UI] Moved HDR 3D LUT SMPTE 2084 tonemapping + luminance/saturation/hue preservation controls to advanced + options (hidden by default). + * [Moderate] madVR 3D LUT generation via the main application: + When using a non-standard source colorspace whitepoint (by + setting a calibration whitepoint target different from the + source colorspace's original whitepoint, e.g. not using DCI + white for DCI P3), non-standard values for input primaries and + whitepoint were written to the 3D LUT header, madVR 3D LUT slot + auto-detection for installation did not work if the source + colorspace was not Rec. 709, and color conversion was affected + if the 3D LUT was not installed via the madVR API (i.e. by not + clicking the “Install 3D LUT” button, but choosing the 3D LUT + manually in madVR's settings). + * [Minor] Downloads within DisplayCAL failed if the download + directory didn't exist (regression of changes made in + DisplayCAL 3.5, SVN revision 5081). + * [Minor] HDR 3D LUT SMPTE 2084 tonemapping for non-Rec. 2020 + source colorspaces did not work correctly (Rec. 2020 was + assumed despite different choice). + * [Minor] Standalone 3D LUT maker: Don't unexpectedly switch to + the source profile's gamma for simple gamma + matrix source + profiles (e.g. DCI P3) when creating a 3D LUT. + +------------------------------------------------------------------- Old: ---- DisplayCAL-3.6.0.0.tar.gz New: ---- DisplayCAL-3.6.1.1.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ DisplayCAL.spec ++++++ --- /var/tmp/diff_new_pack.X5MTdN/_old 2018-08-08 14:54:46.997677176 +0200 +++ /var/tmp/diff_new_pack.X5MTdN/_new 2018-08-08 14:54:47.001677183 +0200 @@ -28,12 +28,11 @@ License: GPL-3.0+ Group: Productivity/Graphics/Other Name: DisplayCAL -Version: 3.6.0.0 +Version: 3.6.1.1 Release: 0 Source0: http://displaycal.net/download/%{name}-%version.tar.gz Url: https://displaycal.net/ BuildRoot: %{_tmppath}/%{name}-%{version}-build -Requires: p7zip Obsoletes: DisplayCAL-0install Provides: dispcalGUI = %{version} Obsoletes: dispcalGUI < 3.1.0.0 ++++++ DisplayCAL-3.6.0.0.tar.gz -> DisplayCAL-3.6.1.1.tar.gz ++++++ /work/SRC/openSUSE:Factory/DisplayCAL/DisplayCAL-3.6.0.0.tar.gz /work/SRC/openSUSE:Factory/.DisplayCAL.new/DisplayCAL-3.6.1.1.tar.gz differ: char 5, line 1
