Hello community,
here is the log from the commit of package xf86-video-i128 for openSUSE:Factory
checked in at 2018-12-11 15:48:19
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xf86-video-i128 (Old)
and /work/SRC/openSUSE:Factory/.xf86-video-i128.new.19453 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xf86-video-i128"
Tue Dec 11 15:48:19 2018 rev:9 rq:656852 version:1.4.0
Changes:
--------
--- /work/SRC/openSUSE:Factory/xf86-video-i128/xf86-video-i128.changes
2013-08-23 11:09:28.000000000 +0200
+++
/work/SRC/openSUSE:Factory/.xf86-video-i128.new.19453/xf86-video-i128.changes
2018-12-11 15:48:22.078170976 +0100
@@ -1,0 +2,13 @@
+Mon Dec 10 14:05:45 UTC 2018 - [email protected]
+
+- Update to version 1.4.0
+ * This is a maintenance release of Number Nine Imagine 128 DDX.
+ There was one patch that has been languishing over at Patchwork X.org
website
+ (https://patchwork.freedesktop.org/patch/122831/) for more than 2 years, so
+ I decided to apply it, and release a new version.
+ With that patch applied and one more small patch I authored, the DDX
compiles
+ cleanly without compilation warnings.
+ (Kevin Brace, Brace Computer Laboratory, https://bracecomputerlab.com)
+- supersedes U_Remove-mibstore.h.patch
+
+-------------------------------------------------------------------
Old:
----
U_Remove-mibstore.h.patch
xf86-video-i128-1.3.6.tar.bz2
New:
----
xf86-video-i128-1.4.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xf86-video-i128.spec ++++++
--- /var/tmp/diff_new_pack.xFbrA1/_old 2018-12-11 15:48:22.554170451 +0100
+++ /var/tmp/diff_new_pack.xFbrA1/_new 2018-12-11 15:48:22.558170447 +0100
@@ -1,7 +1,7 @@
#
# spec file for package xf86-video-i128
#
-# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,14 +17,13 @@
Name: xf86-video-i128
-Version: 1.3.6
+Version: 1.4.0
Release: 0
Summary: Number 9 I128 video driver for the Xorg X server
License: MIT
Group: System/X11/Servers/XF86_4
Url: http://xorg.freedesktop.org/
Source0:
http://xorg.freedesktop.org/releases/individual/driver/%{name}-%{version}.tar.bz2
-Patch0: U_Remove-mibstore.h.patch
BuildRequires: pkg-config
BuildRequires: pkgconfig(fontsproto)
BuildRequires: pkgconfig(pciaccess) >= 0.8.0
@@ -51,7 +50,6 @@
%prep
%setup -q
-%patch0 -p1
%build
%configure
++++++ xf86-video-i128-1.3.6.tar.bz2 -> xf86-video-i128-1.4.0.tar.bz2 ++++++
++++ 28870 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/ChangeLog new/xf86-video-i128-1.4.0/ChangeLog
--- old/xf86-video-i128-1.3.6/ChangeLog 2012-07-17 08:21:01.000000000 +0200
+++ new/xf86-video-i128-1.4.0/ChangeLog 2018-12-08 00:47:17.000000000 +0100
@@ -1,3 +1,68 @@
+commit 674af4475064c8eb8a7f2a9368c04c9089582f94
+Author: Kevin Brace <[email protected]>
+Date: Fri Dec 7 15:15:03 2018 -0800
+
+ Version bumped to Version 1.4.0
+
+ Signed-off-by: Kevin Brace <[email protected]>
+
+commit a1aa486041e0ccdc8e5be3b26f260180e095d4c5
+Author: Kevin Brace <[email protected]>
+Date: Fri Dec 7 15:07:44 2018 -0800
+
+ Use const char for xf86GetOptValString return type
+
+ Apparently, xf86GetOptValString changed their return type from char
+ to const char between X Server 1.15 and 1.16. In particular, X Server
+ commit e1e01d2e33c632e395d7e396f73fba8ae606b15a made the change. This
+ commit will suppress the compilation warning.
+
+ Signed-off-by: Kevin Brace <[email protected]>
+
+commit b532708b75708f7d89449bb7b3b3f4f5df2bfb79
+Author: Laurent Carlier <[email protected]>
+Date: Mon Nov 21 20:53:03 2016 +0100
+
+ Stop using deprecated xf86PciInfo.h
+
+ v2: Remove empty lines
+ Signed-off-by: Laurent Carlier <[email protected]>
+ Reviewed-by: Connor Behan <[email protected]>
+
+commit ffeb1b0e41a0653416c69e083bb3cf31c5519663
+Author: Alan Coopersmith <[email protected]>
+Date: Sun Nov 25 13:59:00 2018 -0800
+
+ Update configure.ac bug URL for gitlab migration
+
+ Signed-off-by: Alan Coopersmith <[email protected]>
+
+commit 628ffa784be178f402e4cb126ce3556fbd601df2
+Author: Mihail Konev <[email protected]>
+Date: Thu Jan 26 14:00:22 2017 +1000
+
+ autogen: add default patch prefix
+
+ Signed-off-by: Mihail Konev <[email protected]>
+
+commit c87753733a6e1f85d1d037dced0b47ce0cf41658
+Author: Adam Jackson <[email protected]>
+Date: Tue Sep 25 08:54:40 2012 -0400
+
+ Remove mibstore.h
+
+ Signed-off-by: Adam Jackson <[email protected]>
+
+commit 3226d66c951f3621fb940cc5844098d892089eb1
+Author: Adam Jackson <[email protected]>
+Date: Wed Aug 15 13:03:11 2012 -0400
+
+ Don't bother to include vbe.h
+
+ Just copied from xf86 boilerplate afaict.
+
+ Signed-off-by: Adam Jackson <[email protected]>
+
commit da79e51c46b9394b17927a3234af90376ad69b00
Author: Dave Airlie <[email protected]>
Date: Tue Jul 17 16:05:09 2012 +1000
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/INSTALL new/xf86-video-i128-1.4.0/INSTALL
--- old/xf86-video-i128-1.3.6/INSTALL 2012-07-17 08:21:01.000000000 +0200
+++ new/xf86-video-i128-1.4.0/INSTALL 2018-12-08 00:47:17.000000000 +0100
@@ -1,11 +1,13 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
Basic Installation
==================
@@ -13,7 +15,11 @@
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -42,7 +48,7 @@
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
-The simplest way to compile this package is:
+ The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@@ -53,12 +59,22 @@
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package.
+ the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
- documentation.
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
- 5. You can remove the program binaries and object files from the
+ 6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -67,8 +83,15 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
Compilers and Options
=====================
@@ -93,7 +116,8 @@
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@@ -120,7 +144,8 @@
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@@ -131,15 +156,46 @@
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
-
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
Particular systems
==================
@@ -159,10 +222,15 @@
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
- ./configure CC="cc -Ae"
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
@@ -174,6 +242,16 @@
./configure CC="cc -nodtk"
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
@@ -189,7 +267,8 @@
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
@@ -277,7 +356,7 @@
`configure' can determine that directory automatically.
`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
+ Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/compile new/xf86-video-i128-1.4.0/compile
--- old/xf86-video-i128-1.3.6/compile 1970-01-01 01:00:00.000000000 +0100
+++ new/xf86-video-i128-1.4.0/compile 2018-12-08 00:47:04.000000000 +0100
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <[email protected]>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <[email protected]> or send patches to
+# <[email protected]>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <[email protected]>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/config.h.in new/xf86-video-i128-1.4.0/config.h.in
--- old/xf86-video-i128-1.3.6/config.h.in 2012-07-17 08:21:01.000000000
+0200
+++ new/xf86-video-i128-1.4.0/config.h.in 2018-12-08 00:47:02.000000000
+0100
@@ -44,8 +44,7 @@
/* Have 4bpp support */
#undef HAVE_XF4BPP
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Name of package */
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/configure.ac new/xf86-video-i128-1.4.0/configure.ac
--- old/xf86-video-i128-1.3.6/configure.ac 2012-07-17 08:00:16.000000000
+0200
+++ new/xf86-video-i128-1.4.0/configure.ac 2018-12-08 00:46:50.000000000
+0100
@@ -23,8 +23,8 @@
# Initialize Autoconf
AC_PREREQ([2.60])
AC_INIT([xf86-video-i128],
- [1.3.6],
- [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
+ [1.4.0],
+ [https://gitlab.freedesktop.org/xorg/driver/xf86-video-i128/issues],
[xf86-video-i128])
AC_CONFIG_SRCDIR([Makefile.am])
AC_CONFIG_HEADERS([config.h])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/missing new/xf86-video-i128-1.4.0/missing
--- old/xf86-video-i128-1.3.6/missing 2012-06-06 13:35:53.000000000 +0200
+++ new/xf86-video-i128-1.4.0/missing 2018-12-08 00:47:04.000000000 +0100
@@ -1,11 +1,10 @@
#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <[email protected]>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
+case $1 in
-msg="missing on your system"
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
Send bug reports to <[email protected]>."
exit $?
@@ -99,228 +70,141 @@
;;
-*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p'
${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
-exit 0
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128.h new/xf86-video-i128-1.4.0/src/i128.h
--- old/xf86-video-i128-1.3.6/src/i128.h 2012-07-17 07:21:15.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128.h 2018-12-08 00:46:50.000000000
+0100
@@ -36,6 +36,12 @@
#define I128PTR(p) ((I128Ptr)((p)->driverPrivate))
+#define PCI_VENDOR_NUMNINE 0x105D
+#define PCI_CHIP_I128 0x2309
+#define PCI_CHIP_I128_2 0x2339
+#define PCI_CHIP_I128_T2R 0x493D
+#define PCI_CHIP_I128_T2R4 0x5348
+
typedef struct {
EntityInfoPtr pEnt;
pciVideoPtr PciInfo;
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128IBMDAC.c
new/xf86-video-i128-1.4.0/src/i128IBMDAC.c
--- old/xf86-video-i128-1.3.6/src/i128IBMDAC.c 2012-06-06 13:37:23.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128IBMDAC.c 2018-12-08 00:46:50.000000000
+0100
@@ -27,7 +27,6 @@
#endif
#include "xf86.h"
-#include "xf86PciInfo.h"
#include "xf86Pci.h"
#include "cursorstr.h"
#include "servermd.h"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128_driver.c
new/xf86-video-i128-1.4.0/src/i128_driver.c
--- old/xf86-video-i128-1.3.6/src/i128_driver.c 2012-07-17 07:21:15.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128_driver.c 2018-12-08 00:46:50.000000000
+0100
@@ -38,9 +38,6 @@
#include "compiler.h"
-/* Drivers for PCI hardware need this */
-#include "xf86PciInfo.h"
-
/* Drivers that need to access the PCI config space directly need this */
#include "xf86Pci.h"
@@ -50,12 +47,9 @@
/* All drivers initialising the SW cursor need this */
#include "mipointer.h"
-/* All drivers implementing backing store need this */
-#include "mibstore.h"
#include "micmap.h"
#include "xf86DDC.h"
-#include "vbe.h"
#include "xf86cmap.h"
#include "fb.h"
@@ -586,7 +580,7 @@
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Acceleration disabled\n");
} else {
int from = X_DEFAULT;
- char *s = xf86GetOptValString(pI128->Options, OPTION_ACCELMETHOD);
+ const char *s = xf86GetOptValString(pI128->Options,
OPTION_ACCELMETHOD);
pI128->NoAccel = FALSE;
if (!xf86NameCmp(s, "EXA")) {
pI128->exa = TRUE;
@@ -1557,7 +1551,6 @@
return FALSE;
}
- miInitializeBackingStore(pScreen);
xf86SetBackingStore(pScreen);
xf86SetSilkenMouse(pScreen);
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128accel.c
new/xf86-video-i128-1.4.0/src/i128accel.c
--- old/xf86-video-i128-1.3.6/src/i128accel.c 2012-07-17 07:21:15.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128accel.c 2018-12-08 00:46:50.000000000
+0100
@@ -34,7 +34,6 @@
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Pci.h"
-#include "xf86PciInfo.h"
#include "i128.h"
#include "i128reg.h"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128dga.c new/xf86-video-i128-1.4.0/src/i128dga.c
--- old/xf86-video-i128-1.3.6/src/i128dga.c 2012-07-17 07:21:15.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128dga.c 2018-12-08 00:46:50.000000000
+0100
@@ -6,7 +6,6 @@
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Pci.h"
-#include "xf86PciInfo.h"
#include "i128.h"
#include "dgaproc.h"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128exa.c new/xf86-video-i128-1.4.0/src/i128exa.c
--- old/xf86-video-i128-1.3.6/src/i128exa.c 2012-06-06 13:37:23.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128exa.c 2018-12-08 00:46:50.000000000
+0100
@@ -35,7 +35,6 @@
#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86Pci.h"
-#include "xf86PciInfo.h"
#include "i128.h"
#include "i128reg.h"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/xf86-video-i128-1.3.6/src/i128init.c
new/xf86-video-i128-1.4.0/src/i128init.c
--- old/xf86-video-i128-1.3.6/src/i128init.c 2012-06-06 13:37:23.000000000
+0200
+++ new/xf86-video-i128-1.4.0/src/i128init.c 2018-12-08 00:46:50.000000000
+0100
@@ -29,7 +29,6 @@
#include "xf86.h"
-#include "xf86PciInfo.h"
#include "xf86Pci.h"
#include "i128.h"
