Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2019-01-08 12:30:17
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.28833 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Tue Jan 8 12:30:17 2019 rev:40 rq:663593 version:2018.12.21
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes
2018-12-07 14:39:42.522750876 +0100
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.28833/raspberrypi-firmware-config.changes
2019-01-08 12:31:55.984046422 +0100
@@ -1,0 +2,30 @@
+Tue Jan 8 08:27:00 UTC 2019 - Guillaume GARDET <[email protected]>
+
+- Update to e1bd9b0 (2018-12-21):
+ * firmware: Added a mailbox function for setting gamma
+ * firmware: bootcode: Support parsing of gpio filters from config.txt
+ See: #1076
+ * firmware: video_encode: Allow Inline Headers to be changed whilst active
+ * firmware: IL: Add XRGB8888 and XBGR8888, and support on video_render, isp,
and hvs
+ * firmware: image_encode: Allow arbitrary buffer strides matching the
appropriate multiples
+ * firmware: platform: Use 3aplus dt-blob section and bcm2710-rpi-3-a-plus.dtb
+ * firmware: dispmanx: Also apply overscan_scale when clamping to screen
+ See: https://forum.kodi.tv/showthread.php?tid=338052
+ * firmware: arm_dt: Accept "csi" as a special DT node that masks IRQs
+ * firmware: MMAL: Include OPAQUE in the list of supported encodings where
appropriate
+ See: https://www.raspberrypi.org/forums/viewtopic.php?f=67&t=226416
+ * firmware: video_render: asserting on the buffer being unlocked is invalid
+ * firmware: video_render: Further fix to a vcos_verify
+ * firmware: IL hvs: Fail component create if the HVS or TXP interrupts are
masked
+ * firmware: Clean up masked interrupt handling - moves it to intctrl
+ * firmware: vcinclude: Clean up INTERRUPT_xxx defines to use one place
+ * firmware: vcfw: camera_subsystem: Stop cameras being detected if ARM has
Unicam instance
+ * firmware: vc_image: Fix up vc_image_bits_per_pixel for YUYV variants and
BGR888
+ * firmware: vc_image: Make the alternate path in yuv420 to rgb888 support
bgr888
+ * firmware: vc_image: Add an rgb_stripe_swap_ext which takes pitches
+ * firmware: vc_image_convert: yuv420 to bgr888 failed on (width&31) != 0
+ * firmware: IL isp: Use gamma block to shift 10bpp YUV to the correct pipe
depth
+ * firmware: video_encode: Always set the input port nBufferSize to match the
image
+ * firmware: Camera/ISP: Allow option to disable demosaicing
+
+-------------------------------------------------------------------
@@ -5 +35 @@
-- Added conflict statment to avoid issues with older kernels
+- Added Conflicts statement to avoid issues with older kernels
raspberrypi-firmware.changes: same change
Old:
----
raspberrypi-firmware-2018.11.05.tar.bz2
New:
----
raspberrypi-firmware-2018.12.21.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-config.spec ++++++
--- /var/tmp/diff_new_pack.s93WbT/_old 2019-01-08 12:31:56.776045563 +0100
+++ /var/tmp/diff_new_pack.s93WbT/_new 2019-01-08 12:31:56.780045558 +0100
@@ -1,7 +1,7 @@
#
# spec file for package raspberrypi-firmware-config
#
-# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
+# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware-config
-Version: 2018.11.05
+Version: 2018.12.21
Release: 0
Summary: Configuration for the Raspberry Pi firmware loader
License: MIT
++++++ raspberrypi-firmware.spec ++++++
--- /var/tmp/diff_new_pack.s93WbT/_old 2019-01-08 12:31:56.804045532 +0100
+++ /var/tmp/diff_new_pack.s93WbT/_new 2019-01-08 12:31:56.812045524 +0100
@@ -1,7 +1,7 @@
#
# spec file for package raspberrypi-firmware
#
-# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany.
+# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware
-Version: 2018.11.05
+Version: 2018.12.21
Release: 0
Summary: Binary bootloader and firmware files for Raspberry Pi
License: SUSE-Firmware
++++++ raspberrypi-firmware-2018.11.05.tar.bz2 ->
raspberrypi-firmware-2018.12.21.tar.bz2 ++++++
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-2018.11.05.tar.bz2
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.28833/raspberrypi-firmware-2018.12.21.tar.bz2
differ: char 11, line 1
