Hello community, here is the log from the commit of package libXxf86dga for openSUSE:Factory checked in at 2019-03-26 22:29:35 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libXxf86dga (Old) and /work/SRC/openSUSE:Factory/.libXxf86dga.new.25356 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "libXxf86dga" Tue Mar 26 22:29:35 2019 rev:9 rq:687600 version:1.1.5 Changes: -------- --- /work/SRC/openSUSE:Factory/libXxf86dga/libXxf86dga.changes 2013-06-05 12:00:52.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.libXxf86dga.new.25356/libXxf86dga.changes 2019-03-26 22:29:39.701745760 +0100 @@ -1,0 +2,7 @@ +Fri Mar 22 11:25:37 UTC 2019 - Stefan Dirsch <sndir...@suse.com> + +- Update to version 1.1.5 + * This release raises the minimum required libX11 version to + 1.6.0 from 2013. + +------------------------------------------------------------------- Old: ---- libXxf86dga-1.1.4.tar.bz2 New: ---- libXxf86dga-1.1.5.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libXxf86dga.spec ++++++ --- /var/tmp/diff_new_pack.8r7Gog/_old 2019-03-26 22:29:40.133745655 +0100 +++ /var/tmp/diff_new_pack.8r7Gog/_new 2019-03-26 22:29:40.137745654 +0100 @@ -1,7 +1,7 @@ # # spec file for package libXxf86dga # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,7 +18,7 @@ Name: libXxf86dga %define lname libXxf86dga1 -Version: 1.1.4 +Version: 1.1.5 Release: 0 Summary: XFree86-DGA extension client library License: MIT @@ -28,6 +28,7 @@ #Git-Clone: git://anongit.freedesktop.org/xorg/lib/libXxf86dga #Git-Web: http://cgit.freedesktop.org/xorg/lib/libXxf86dga/ Source: http://xorg.freedesktop.org/releases/individual/lib/%{name}-%{version}.tar.bz2 +Source1: baselibs.conf BuildRoot: %{_tmppath}/%{name}-%{version}-build #git#BuildRequires: autoconf >= 2.60, automake, libtool BuildRequires: fdupes ++++++ libXxf86dga-1.1.4.tar.bz2 -> libXxf86dga-1.1.5.tar.bz2 ++++++ ++++ 29033 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/ChangeLog new/libXxf86dga-1.1.5/ChangeLog --- old/libXxf86dga-1.1.4/ChangeLog 2013-05-31 03:36:52.000000000 +0200 +++ new/libXxf86dga-1.1.5/ChangeLog 2019-03-16 23:21:33.000000000 +0100 @@ -1,3 +1,76 @@ +commit e605c540995554af99d8b728c7d1d4e82e514199 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Sat Mar 16 15:20:28 2019 -0700 + + libXxf86dga 1.1.5 + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 975d71ffbdb17f2ed361304ec940db8709a0b58f +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Fri Dec 7 19:58:09 2018 -0800 + + Update configure.ac bug URL for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 036673d9e160143c0959240b14a20efb1b298987 +Author: Alan Coopersmith <alan.coopersm...@oracle.com> +Date: Mon Nov 19 22:55:54 2018 -0800 + + Update README for gitlab migration + + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + +commit 91f4518a2e35d9a9513db867e48f55a95d5643a9 +Author: Mihail Konev <k....@ya.ru> +Date: Thu Jan 26 13:52:49 2017 +1000 + + autogen: add default patch prefix + + Signed-off-by: Mihail Konev <k....@ya.ru> + +commit 286a9f9b2e66094dd17104f14ad557bf1d938b3f +Author: Emil Velikov <emil.l.veli...@gmail.com> +Date: Mon Mar 9 12:00:52 2015 +0000 + + autogen.sh: use quoted string variables + + Place quotes around the $srcdir, $ORIGDIR and $0 variables to prevent + fall-outs, when they contain space. + + Signed-off-by: Emil Velikov <emil.l.veli...@gmail.com> + Reviewed-by: Peter Hutterer <peter.hutte...@who-t.net> + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + +commit 3d2ceb7b0df67c7657e77353ff50d4c22955697e +Author: Peter Hutterer <peter.hutte...@who-t.net> +Date: Tue Jan 24 10:32:07 2017 +1000 + + autogen.sh: use exec instead of waiting for configure to finish + + Syncs the invocation of configure with the one from the server. + + Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net> + Reviewed-by: Emil Velikov <emil.veli...@collabora.com> + +commit 7fad129032e7b4be67a27e31c660ca10b44444f6 +Author: Michael Joost <m...@michael-joost.de> +Date: Mon Nov 18 16:11:26 2013 +0100 + + Remove fallback for _XEatDataWords, require libX11 1.6 for it + + _XEatDataWords was orignally introduced with the May 2013 security + patches, and in order to ease the process of delivering those, + fallback versions of _XEatDataWords were included in the X extension + library patches so they could be applied to older versions that didn't + have libX11 1.6 yet. Now that we're past that hurdle, we can drop + the fallbacks and just require libX11 1.6 for building new versions + of the extension libraries. + + Reviewed-by: Alan Coopersmith <alan.coopersm...@oracle.com> + Signed-off-by: Alan Coopersmith <alan.coopersm...@oracle.com> + commit 0f2e21d7e8310cf7bc02bba56884be0e52c061ae Author: Alan Coopersmith <alan.coopersm...@oracle.com> Date: Thu May 30 18:36:19 2013 -0700 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/INSTALL new/libXxf86dga-1.1.5/INSTALL --- old/libXxf86dga-1.1.4/INSTALL 2013-05-31 03:36:52.000000000 +0200 +++ new/libXxf86dga-1.1.5/INSTALL 2019-03-16 23:21:33.000000000 +0100 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/Makefile.am new/libXxf86dga-1.1.5/Makefile.am --- old/libXxf86dga-1.1.4/Makefile.am 2013-05-31 03:36:29.000000000 +0200 +++ new/libXxf86dga-1.1.5/Makefile.am 2019-03-16 23:21:18.000000000 +0100 @@ -14,3 +14,5 @@ $(CHANGELOG_CMD) dist-hook: ChangeLog INSTALL + +EXTRA_DIST = README.md diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/README new/libXxf86dga-1.1.5/README --- old/libXxf86dga-1.1.4/README 2013-05-31 03:36:29.000000000 +0200 +++ new/libXxf86dga-1.1.5/README 1970-01-01 01:00:00.000000000 +0100 @@ -1,25 +0,0 @@ -libXxf86dga - Client library for the XFree86-DGA extension. - -All questions regarding this software should be directed at the -Xorg mailing list: - - http://lists.freedesktop.org/mailman/listinfo/xorg - -Please submit bug reports to the Xorg bugzilla: - - https://bugs.freedesktop.org/enter_bug.cgi?product=xorg - -The master development code repository can be found at: - - git://anongit.freedesktop.org/git/xorg/lib/libXxf86dga - - http://cgit.freedesktop.org/xorg/lib/libXxf86dga - -For patch submission instructions, see: - - http://www.x.org/wiki/Development/Documentation/SubmittingPatches - -For more information on the git code manager, see: - - http://wiki.x.org/wiki/GitPage - diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/README.md new/libXxf86dga-1.1.5/README.md --- old/libXxf86dga-1.1.4/README.md 1970-01-01 01:00:00.000000000 +0100 +++ new/libXxf86dga-1.1.5/README.md 2019-03-16 23:21:18.000000000 +0100 @@ -0,0 +1,18 @@ +libXxf86dga - Client library for the XFree86-DGA extension. +----------------------------------------------------------- + +All questions regarding this software should be directed at the +Xorg mailing list: + + https://lists.x.org/mailman/listinfo/xorg + +The master development code repository can be found at: + + https://gitlab.freedesktop.org/xorg/lib/libXxf86dga + +Please submit bug reports and requests to merge patches there. + +For patch submission instructions, see: + + https://www.x.org/wiki/Development/Documentation/SubmittingPatches + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/compile new/libXxf86dga-1.1.5/compile --- old/libXxf86dga-1.1.4/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/libXxf86dga-1.1.5/compile 2019-03-16 23:21:26.000000000 +0100 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey <tro...@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-autom...@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/configure.ac new/libXxf86dga-1.1.5/configure.ac --- old/libXxf86dga-1.1.4/configure.ac 2013-05-31 03:36:29.000000000 +0200 +++ new/libXxf86dga-1.1.5/configure.ac 2019-03-16 23:21:18.000000000 +0100 @@ -1,8 +1,8 @@ # Initialize Autoconf AC_PREREQ([2.60]) -AC_INIT([libXxf86dga], [1.1.4], - [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [libXxf86dga]) +AC_INIT([libXxf86dga], [1.1.5], + [https://gitlab.freedesktop.org/xorg/lib/libXxf86dga/issues], [libXxf86dga]) AC_CONFIG_SRCDIR([Makefile.am]) AC_CONFIG_HEADERS(src/config.h) @@ -20,13 +20,7 @@ XORG_CHECK_MALLOC_ZERO # Obtain compiler/linker options for depedencies -PKG_CHECK_MODULES(XXF86DGA, xproto x11 xextproto xext [xf86dgaproto >= 2.0.99.2]) - -# Check for _XEatDataWords function that may be patched into older Xlib release -SAVE_LIBS="$LIBS" -LIBS="$XXF86DGA_LIBS" -AC_CHECK_FUNCS([_XEatDataWords]) -LIBS="$SAVE_LIBS" +PKG_CHECK_MODULES(XXF86DGA, xproto [x11 >= 1.6] xextproto xext [xf86dgaproto >= 2.0.99.2]) AC_CONFIG_FILES([Makefile src/Makefile diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/missing new/libXxf86dga-1.1.5/missing --- old/libXxf86dga-1.1.4/missing 2013-05-31 03:36:38.000000000 +0200 +++ new/libXxf86dga-1.1.5/missing 2019-03-16 23:21:26.000000000 +0100 @@ -1,9 +1,9 @@ #! /bin/sh # Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-06-26.16; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -160,7 +160,7 @@ ;; autom4te*) echo "You might have modified some maintainer files that require" - echo "the 'automa4te' program to be rebuilt." + echo "the 'autom4te' program to be rebuilt." program_details 'autom4te' ;; bison*|yacc*) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/src/XF86DGA2.c new/libXxf86dga-1.1.5/src/XF86DGA2.c --- old/libXxf86dga-1.1.4/src/XF86DGA2.c 2013-05-31 03:36:29.000000000 +0200 +++ new/libXxf86dga-1.1.5/src/XF86DGA2.c 2019-03-16 23:21:18.000000000 +0100 @@ -27,17 +27,6 @@ #include <stdint.h> #include <limits.h> -#ifndef HAVE__XEATDATAWORDS -static inline void _XEatDataWords(Display *dpy, unsigned long n) -{ -# ifndef LONG64 - if (n >= (ULONG_MAX >> 2)) - _XIOError(dpy); -# endif - _XEatData (dpy, n << 2); -} -#endif - /* If you change this, change the Bases[] array below as well */ #define MAX_HEADS 16 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libXxf86dga-1.1.4/src/config.h.in new/libXxf86dga-1.1.5/src/config.h.in --- old/libXxf86dga-1.1.4/src/config.h.in 2013-05-31 03:36:37.000000000 +0200 +++ new/libXxf86dga-1.1.5/src/config.h.in 2019-03-16 23:21:25.000000000 +0100 @@ -30,11 +30,7 @@ /* Define to 1 if you have the <unistd.h> header file. */ #undef HAVE_UNISTD_H -/* Define to 1 if you have the `_XEatDataWords' function. */ -#undef HAVE__XEATDATAWORDS - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ +/* Define to the sub-directory where libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */