Hello community, here is the log from the commit of package sg3_utils for openSUSE:Factory checked in at 2019-04-20 17:12:29 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sg3_utils (Old) and /work/SRC/openSUSE:Factory/.sg3_utils.new.5536 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "sg3_utils" Sat Apr 20 17:12:29 2019 rev:52 rq:695444 version:1.45~803+31.564be3d Changes: -------- --- /work/SRC/openSUSE:Factory/sg3_utils/sg3_utils.changes 2018-04-16 12:43:43.076618688 +0200 +++ /work/SRC/openSUSE:Factory/.sg3_utils.new.5536/sg3_utils.changes 2019-04-20 17:12:36.446873029 +0200 @@ -1,0 +2,57 @@ +Tue Mar 26 22:11:38 UTC 2019 - [email protected] + +- Spec file: + * add fc_wwpn_id (bsc#1005063) + * add lun masking service (bsc#954600) + * drop BuildRequires on udev + * replace unversioned "Provides: scsi" with versioned + +- Update to version sg3_utils-1.45~803+31.564be3d: + * New versioning scheme for upstream pre-release: + 1.45 - upstream release target, 803 - upstream svn id, + +31: SUSE commits on top of svn, 564be3d - git hash + * rescan-scsi-bus.sh: terminate scanning if last lun got removed + (bsc#1087008) + * 58-scsi-sg3_symlink.rules: don't skip multipath members + (bsc#1085212) + * Add scsi-enable-target-scan.sh (bsc#954600) + +- Update to svn r803: + * sg_opcodes: expand MLU (18-102r0) + * sg_format: add --dcrt used twice (FOV=1 DCRT=0) + * rescan-scsi-bus: widen LUN 0 only scanning + (bsc#1069384) +- Earlier SUSE fixes included in 1.45: + * rescan-scsi-bus.sh: use LUN wildcard in idlist (bsc#1069384) + [svn: r795] + * sg_ses: fixup page decoding (bsc#1077787) [svn: r795] + * sg_ses: allow to decode raw data instead of reading from a device + (bsc#1050943) [svn: r795] + +- Update to sg3_utils-1.44 [20180912] [svn: r791] + * rescan-scsi-bus.sh: harden code + - bump version to 20180615 + - add --ignore-rev to ignore revision change + * introduce SG3_UTILS_DSENSE environment variable + * sginfo: don't open /dev/snapshot + * sg_timestamp: add '--no-timestamp' option + - add --elapsed and --hex options + * sg_wr_mode: add --rtd option for RTD bi + * sg_unmap: add --all=ST,RN[,LA] option + * sgm_dd, sg_dd: add --dry-run and --verbose options + * sg_inq+sg_vpd: update Extended inquiry data vpd page + * sg_ses: add 'hw_reset' and 'sw_reset' to enclosure services + controller electronics element type (18-047r1) + * sg_decode sense: add --cdb and --err=ES options + * sg_format: add --dry-run option + - extend --wait timeout for > 4TB disks + * sg_sanitize: add --dry-run option +- Earlier SUSE fixes included in 1.44: + * sg_inq: decode standard INQUIRY for CD-ROMs correctly + (bsc#1065448, bsc#1070431) [svn: r742] + * sg_inq: export all NAA values (bsc#1050767) [svn: r715] + * Add fc_wwpn_id to generate by-path links for fibrechannel + (bsc#1005063) (svn@715) + * sg_vpd: struct opts_t misaligment (bsc#1050943) [svn: r707] + +------------------------------------------------------------------- Old: ---- sg3_utils-1.43.tar.xz New: ---- _servicedata sg3_utils-1.45~803+31.564be3d.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sg3_utils.spec ++++++ --- /var/tmp/diff_new_pack.ec2IMO/_old 2019-04-20 17:12:37.090874001 +0200 +++ /var/tmp/diff_new_pack.ec2IMO/_new 2019-04-20 17:12:37.090874001 +0200 @@ -1,7 +1,7 @@ # # spec file for package sg3_utils # -# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -12,16 +12,16 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # Name: sg3_utils -%define lname libsgutils2-1_43-2 -Version: 1.43 +%define lname libsgutils2-1_45-2 +Version: 1.45~803+31.564be3d Release: 0 Summary: A collection of tools that send SCSI commands to devices -License: GPL-2.0+ and BSD-3-Clause +License: GPL-2.0-or-later AND BSD-3-Clause Group: Hardware/Other Url: http://sg.danny.cz/sg/sg3_utils.html @@ -29,10 +29,10 @@ Source1: dracut.conf BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: libtool -BuildRequires: udev +BuildRequires: systemd-rpm-macros BuildRequires: xz Requires(post): coreutils -Provides: scsi +Provides: scsi = %{version} Provides: sg_utils Supplements: modalias(scsi:t-0x00*) Supplements: modalias(scsi:t-0x07*) @@ -99,20 +99,33 @@ install -m 644 scripts/55-scsi-sg3_id.rules $RPM_BUILD_ROOT%{_udevrulesdir} install -m 644 scripts/58-scsi-sg3_symlink.rules $RPM_BUILD_ROOT%{_udevrulesdir} install -m 644 scripts/40-usb-blacklist.rules $RPM_BUILD_ROOT%{_udevrulesdir} +install -m 644 scripts/59-fc-wwpn-id.rules $RPM_BUILD_ROOT%{_udevrulesdir} +install -m 755 scripts/fc_wwpn_id $RPM_BUILD_ROOT%{_udevrulesdir}/.. mkdir -p $RPM_BUILD_ROOT/usr/lib/dracut/dracut.conf.d install -m 644 %{SOURCE1} $RPM_BUILD_ROOT/usr/lib/dracut/dracut.conf.d/50-sg3_utils.conf +mkdir -p $RPM_BUILD_ROOT%{_unitdir} +install -m 644 scripts/lunmask.service $RPM_BUILD_ROOT%{_unitdir} +mkdir -p $RPM_BUILD_ROOT%{_unitdir}/../scripts +install -m 755 scripts/scsi-enable-target-scan.sh $RPM_BUILD_ROOT%{_unitdir}/../scripts rm -f %{buildroot}%{_libdir}/*.la +%post -n %lname -p /sbin/ldconfig +%postun -n %lname -p /sbin/ldconfig + +%pre +%service_add_pre lunmask.service + %post +%service_add_post lunmask.service %{?regenerate_initrd_post} -%post -p /sbin/ldconfig -n %lname +%preun +%service_del_preun lunmask.service %postun +%service_del_postun lunmask.service %{?regenerate_initrd_post} -%postun -p /sbin/ldconfig -n %lname - %posttrans %{?regenerate_initrd_posttrans} @@ -125,16 +138,22 @@ %_bindir/sginfo %_bindir/sgp_dd %_bindir/sgm_dd -%_bindir/scsi_logging_level %_bindir/rescan-scsi-bus.sh %_mandir/man8/*.8* +%dir /usr/lib/udev +%dir %{_udevrulesdir} %{_udevrulesdir}/40-usb-blacklist.rules %{_udevrulesdir}/54-before-scsi-sg3_id.rules %{_udevrulesdir}/55-scsi-sg3_id.rules %{_udevrulesdir}/58-scsi-sg3_symlink.rules +%{_udevrulesdir}/59-fc-wwpn-id.rules +%{_udevrulesdir}/../fc_wwpn_id %dir /usr/lib/dracut %dir /usr/lib/dracut/dracut.conf.d /usr/lib/dracut/dracut.conf.d/50-sg3_utils.conf +%dir %{_unitdir}/../scripts +%{_unitdir}/../scripts/scsi-enable-target-scan.sh +%{_unitdir}/lunmask.service %files -n %lname %defattr(-,root,root) ++++++ _service ++++++ --- /var/tmp/diff_new_pack.ec2IMO/_old 2019-04-20 17:12:37.118874043 +0200 +++ /var/tmp/diff_new_pack.ec2IMO/_new 2019-04-20 17:12:37.122874049 +0200 @@ -1,21 +1,24 @@ <services> <service name="tar_scm" mode="disabled"> <param name="scm">git</param> - <param name="url">https://github.com/hreinecke/sg3_utils.git</param> + <param name="url">https://github.com/openSUSE/sg3_utils.git</param> <param name="subdir"></param> <param name="filename">sg3_utils</param> - <param name="version">1.43</param> + <!-- New versioning scheme for upstream pre-release: + 1.45 - upstream release target + latest SVN release should be tagged "r<id>" in git --> + <param name="versionformat">1.45@PARENT_TAG@+@TAG_OFFSET@.%h</param> + <param name="match-tag">r[0-9]*</param> + <!-- convert "rXYZ" to "~XYZ", convention for pre-release pkgs --> + <param name="versionrewrite-pattern">(1\.[0-9]*)r([0-9]*)</param> + <param name="versionrewrite-replacement">\1~\2</param> <param name="revision">factory</param> -<!-- Enable the following to include git tag offset+commit id in - version number --> -<!-- - <param name="versionformat">1.43+@TAG_OFFSET@.%h</param> - <param name="match-tag">v1.[0-9][0-9]</param> <param name="changesgenerate">enable</param> ---> </service> <service name="recompress" mode="disabled"> <param name="file">*sg3_utils*.tar</param> <param name="compression">xz</param> </service> + <service name="set_version" mode="disabled"/> </services> + ++++++ _servicedata ++++++ <servicedata> <service name="tar_scm"> <param name="url">https://github.com/openSUSE/sg3_utils.git</param> <param name="changesrevision">564be3d665882df5439e12c6a611487feb7310d6</param></service></servicedata>
