Hello community, here is the log from the commit of package dracut for openSUSE:Factory checked in at 2019-05-03 22:06:56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/dracut (Old) and /work/SRC/openSUSE:Factory/.dracut.new.5148 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "dracut" Fri May 3 22:06:56 2019 rev:137 rq:698239 version:044.2 Changes: -------- --- /work/SRC/openSUSE:Factory/dracut/dracut.changes 2019-03-19 11:08:29.882092966 +0100 +++ /work/SRC/openSUSE:Factory/.dracut.new.5148/dracut.changes 2019-05-03 22:06:57.850863647 +0200 @@ -1,0 +2,18 @@ +Thu Apr 25 23:40:25 UTC 2019 - Daniel Molkentin <[email protected]> + +- dracut-lib.sh:dev_unit_name() guard against $dev beginning with "-" (bsc#1132448) + * adds 0601-base-dracut-lib.sh-dev_unit_name-guard-against-dev-b.patch + +------------------------------------------------------------------- +Wed Apr 24 08:52:33 UTC 2019 - Daniel Molkentin <[email protected]> + +- 95iscsi: avoid error messages when building initrd, multipath timeouts + (bsc#1130114, bsc#1130107, bsc#1121238) + * adds 0595-iscsi-don-t-continue-waiting-if-the-root-device-is-p.patch + * adds 0596-network-stop-waiting-for-interfaces-if-root-device-i.patch + * adds 0597-iscsiroot-parse_iscsi_root-overwrites-command-line-a.patch + * adds 0598-iscsiroot-there-s-never-more-than-one-target-per-cal.patch + * adds 0599-iscsiroot-try-targets-only-once.patch + * adds 0600-iscsiroot-remove-bashisms.patch + +------------------------------------------------------------------- @@ -180 +198 @@ - (boo#1089332) + (bsc#1089332) New: ---- 0595-iscsi-don-t-continue-waiting-if-the-root-device-is-p.patch 0596-network-stop-waiting-for-interfaces-if-root-device-i.patch 0597-iscsiroot-parse_iscsi_root-overwrites-command-line-a.patch 0598-iscsiroot-there-s-never-more-than-one-target-per-cal.patch 0599-iscsiroot-try-targets-only-once.patch 0600-iscsiroot-remove-bashisms.patch 0601-base-dracut-lib.sh-dev_unit_name-guard-against-dev-b.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ dracut.spec ++++++ --- /var/tmp/diff_new_pack.lPK6y5/_old 2019-05-03 22:07:05.162877681 +0200 +++ /var/tmp/diff_new_pack.lPK6y5/_new 2019-05-03 22:07:05.162877681 +0200 @@ -12,7 +12,7 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via https://bugs.opensuse.org/ +# Please submit bugfixes or comments via http://bugs.opensuse.org/ # @@ -433,6 +433,14 @@ Patch593: 0593-dracut-only-copy-xattr-if-root.patch # Patch specific to SUSE, not upstream Patch594: 0594-Check-SUSE-kernel-module-dependencies-recursively.patch +# Patches 595-600 submitted upstream https://github.com/dracutdevs/dracut/pull/562 +Patch595: 0595-iscsi-don-t-continue-waiting-if-the-root-device-is-p.patch +Patch596: 0596-network-stop-waiting-for-interfaces-if-root-device-i.patch +Patch597: 0597-iscsiroot-parse_iscsi_root-overwrites-command-line-a.patch +Patch598: 0598-iscsiroot-there-s-never-more-than-one-target-per-cal.patch +Patch599: 0599-iscsiroot-try-targets-only-once.patch +Patch600: 0600-iscsiroot-remove-bashisms.patch +Patch601: 0601-base-dracut-lib.sh-dev_unit_name-guard-against-dev-b.patch BuildRequires: asciidoc BuildRequires: bash @@ -745,6 +753,13 @@ %patch592 -p1 %patch593 -p1 %patch594 -p1 +%patch595 -p1 +%patch596 -p1 +%patch597 -p1 +%patch598 -p1 +%patch599 -p1 +%patch600 -p1 +%patch601 -p1 %build %configure\ ++++++ 0595-iscsi-don-t-continue-waiting-if-the-root-device-is-p.patch ++++++ >From 06d95ed6eb72ad9b1a4666b3d7cb6977e5b83ca5 Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 21 Mar 2019 16:27:04 +0100 Subject: [PATCH 1/6] iscsi: don't continue waiting if the root device is present dracut waits for every iscsiroot connection to be established before switching root. This is not necessary in multipath scenarios, where a single path is usually sufficient to set up the root device, and where users expect booting to succeed unless all paths are down. Don't wait for the iscsi portal to start if the root device has already been found. --- modules.d/95iscsi/parse-iscsiroot.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh index f884e684..b96605ef 100755 --- a/modules.d/95iscsi/parse-iscsiroot.sh +++ b/modules.d/95iscsi/parse-iscsiroot.sh @@ -84,7 +84,7 @@ if [ -n "$iscsi_firmware" ]; then modprobe -b -q iscsi_boot_sysfs 2>/dev/null modprobe -b -q iscsi_ibft # if no ip= is given, but firmware - echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh + echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT" initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT" initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "'$NEWROOT'" @@ -147,7 +147,7 @@ for nroot in $(getargs netroot); do type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh parse_iscsi_root "$nroot" || return 1 netroot_enc=$(str_replace "$nroot" '/' '\2f') - echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh + echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh done # Done, all good! -- 2.16.4 ++++++ 0596-network-stop-waiting-for-interfaces-if-root-device-i.patch ++++++ >From 9aeceb14e010d68f8ee92f60664eef39d57552c2 Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 21 Mar 2019 21:31:15 +0100 Subject: [PATCH 2/6] network: stop waiting for interfaces if root device is present --- modules.d/40network/net-genrules.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/modules.d/40network/net-genrules.sh b/modules.d/40network/net-genrules.sh index 843bd988..a5a9ae22 100755 --- a/modules.d/40network/net-genrules.sh +++ b/modules.d/40network/net-genrules.sh @@ -86,7 +86,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh for iface in $wait_ifaces; do if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then - echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh + echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh fi done # Default: We don't know the interface to use, handle all -- 2.16.4 ++++++ 0597-iscsiroot-parse_iscsi_root-overwrites-command-line-a.patch ++++++ >From a9ef0960799ad8d95de2e13a9f8773e88826e83e Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 4 Apr 2019 15:29:04 +0200 Subject: [PATCH 3/6] iscsiroot: parse_iscsi_root overwrites command line args iscsi_target_name, iscsi_target_ip, iscsi_target_port are unconditionally overwritten by parse_iscsi_root. Don't set them here, for code clarity. --- modules.d/95iscsi/iscsiroot.sh | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) Index: dracut-044/modules.d/95iscsi/iscsiroot.sh =================================================================== --- dracut-044.orig/modules.d/95iscsi/iscsiroot.sh +++ dracut-044/modules.d/95iscsi/iscsiroot.sh @@ -102,12 +102,6 @@ handle_netroot() # override conf settings by command line options arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) [ -n "$arg" ] && iscsi_initiator=$arg - arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=) - [ -n "$arg" ] && iscsi_target_name=$arg - arg=$(getarg rd.iscsi.target.ip -d iscsi_target_ip) - [ -n "$arg" ] && iscsi_target_ip=$arg - arg=$(getarg rd.iscsi.target.port -d iscsi_target_port=) - [ -n "$arg" ] && iscsi_target_port=$arg arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=) [ -n "$arg" ] && iscsi_target_group=$arg arg=$(getarg rd.iscsi.username -d iscsi_username=) @@ -122,6 +116,8 @@ handle_netroot() iscsi_param="$iscsi_param $p" done + # this sets iscsi_target_name and possibly overwrites most + # parameters read from the command line above parse_iscsi_root "$1" || return 1 # Bail out early, if there is no route to the destination ++++++ 0598-iscsiroot-there-s-never-more-than-one-target-per-cal.patch ++++++ >From 04657e60f00d53f52d47b7fd02b53618762340e4 Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 4 Apr 2019 15:40:14 +0200 Subject: [PATCH 4/6] iscsiroot: there's never more than one target per call iscsi_target_name is set by iscsi_root, and thus can't have more than one member. This allows us to get rid of one bashism in iscsiroot.sh. --- modules.d/95iscsi/iscsiroot.sh | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) Index: dracut-044/modules.d/95iscsi/iscsiroot.sh =================================================================== --- dracut-044.orig/modules.d/95iscsi/iscsiroot.sh +++ dracut-044/modules.d/95iscsi/iscsiroot.sh @@ -221,8 +221,8 @@ handle_netroot() [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && exit 1 fi - for target in $iscsi_target_name; do - if [[ "$targets" =~ "$target" ]]; then + for target in $targets; do + if [ "$target" = "$iscsi_target_name" ]; then if [ -n "$iscsi_iface_name" ]; then $(iscsiadm -m iface -I $iscsi_iface_name --op=new) [ -n "$iscsi_initiator" ] && $(iscsiadm -m iface -I $iscsi_iface_name --op=update --name=iface.initiatorname --value=$iscsi_initiator) ++++++ 0599-iscsiroot-try-targets-only-once.patch ++++++ >From 1fd34ae26591701e27577e381dc284248e3bf6e2 Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 4 Apr 2019 16:16:40 +0200 Subject: [PATCH 5/6] iscsiroot: try targets only once In multipath scenarios, "iscsiadm -m node" may contain several records with the same target. There's no point in trying "iscsiadm --login" multiple time for the same target, through the same portal. Moreover, warn if the desired target is not on the node list. --- modules.d/95iscsi/iscsiroot.sh | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) Index: dracut-044/modules.d/95iscsi/iscsiroot.sh =================================================================== --- dracut-044.orig/modules.d/95iscsi/iscsiroot.sh +++ dracut-044/modules.d/95iscsi/iscsiroot.sh @@ -97,7 +97,7 @@ handle_netroot() local iscsi_in_username iscsi_in_password local iscsi_iface_name iscsi_netdev_name local iscsi_param param - local p + local p found # override conf settings by command line options arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) @@ -221,6 +221,7 @@ handle_netroot() [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && exit 1 fi + found= for target in $targets; do if [ "$target" = "$iscsi_target_name" ]; then if [ -n "$iscsi_iface_name" ]; then ++++++ 0600-iscsiroot-remove-bashisms.patch ++++++ >From c14a550d54b408088fd0aa14a4f2088f8b45237e Mon Sep 17 00:00:00 2001 From: Martin Wilck <[email protected]> Date: Thu, 4 Apr 2019 17:12:07 +0200 Subject: [PATCH 6/6] iscsiroot: remove bashisms According to the dracut README, module code to be run in the initrd must be POSIX-compliant. Replace remaining bashisms (as reported by checkbashisms) with POSIX compliant code. The use of "type" is not strictly POSIX compliant, but it's all over the place in dracut code. dash supports it, anyway. --- modules.d/95iscsi/iscsiroot.sh | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh index 73dd8c20..c00a9f58 100755 --- a/modules.d/95iscsi/iscsiroot.sh +++ b/modules.d/95iscsi/iscsiroot.sh @@ -61,11 +61,11 @@ handle_firmware() if ! iscsiadm -m fw; then warn "iscsiadm: Could not get list of targets from firmware." else - ifaces=( $(echo /sys/firmware/ibft/ethernet*) ) + ifaces=$(set -- /sys/firmware/ibft/ethernet*; echo $#) retry=$(cat /tmp/session-retry) - if [ $retry -lt ${#ifaces[*]} ]; then - let retry++ + if [ $retry -lt $ifaces ]; then + retry=$((retry+1)) echo $retry > /tmp/session-retry return 1 else @@ -95,6 +95,7 @@ handle_netroot() local iscsi_iface_name iscsi_netdev_name local iscsi_param param local p found + local login_retry_max_seen= # override conf settings by command line options arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) @@ -110,7 +111,9 @@ handle_netroot() arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=) [ -n "$arg" ] && iscsi_in_password=$arg for p in $(getargs rd.iscsi.param -d iscsi_param); do - iscsi_param="$iscsi_param $p" + [ "${p%=*}" = node.session.initial_login_retry_max ] && \ + login_retry_max_seen=yes + iscsi_param="$iscsi_param $p" done # this sets iscsi_target_name and possibly overwrites most @@ -123,9 +126,8 @@ handle_netroot() fi #limit iscsistart login retries - if [[ ! "$iscsi_param" =~ "node.session.initial_login_retry_max" ]]; then - set_login_retries - retries=$? + if [ "$login_retry_max_seen" != yes ]; then + retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max) if [ $retries -gt 0 ]; then iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries" fi -- 2.16.4 ++++++ 0601-base-dracut-lib.sh-dev_unit_name-guard-against-dev-b.patch ++++++ >From 33348c63393d6fca3b6070dfdf108bff7b59d53b Mon Sep 17 00:00:00 2001 From: Alexander Tsoy <[email protected]> Date: Tue, 5 Jan 2016 22:11:57 +0300 Subject: [PATCH] base/dracut-lib.sh:dev_unit_name() guard against $dev beginning with "-" crypt/parse-crypt.sh generate initqueue job which always call dev_unit_name() with an argument beginning with "-". This results in the following error: dracut-initqueue[307]: + systemd-escape -p -cfb4aa43-2f02-4c6b-a313-60ea99288087 dracut-initqueue[307]: systemd-escape: invalid option -- 'c' --- modules.d/99base/dracut-lib.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh index 89235b04..45ef31b6 100755 --- a/modules.d/99base/dracut-lib.sh +++ b/modules.d/99base/dracut-lib.sh @@ -874,7 +874,7 @@ dev_unit_name() local dev="$1" if command -v systemd-escape >/dev/null; then - systemd-escape -p "$dev" + systemd-escape -p -- "$dev" return fi -- 2.16.4
