Hello community, here is the log from the commit of package cura-lulzbot for openSUSE:Factory checked in at 2019-06-26 16:04:28 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/cura-lulzbot (Old) and /work/SRC/openSUSE:Factory/.cura-lulzbot.new.4615 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "cura-lulzbot" Wed Jun 26 16:04:28 2019 rev:11 rq:712056 version:3.6.10 Changes: -------- --- /work/SRC/openSUSE:Factory/cura-lulzbot/cura-lulzbot.changes 2019-06-25 22:22:19.409142454 +0200 +++ /work/SRC/openSUSE:Factory/.cura-lulzbot.new.4615/cura-lulzbot.changes 2019-06-26 16:05:06.755720962 +0200 @@ -1,0 +2,27 @@ +Tue Jun 25 12:59:43 UTC 2019 - Adrian Schröter <adr...@suse.de> + +- update to 3.6.10 + T6335: Icons and buttons size fix for lulzbot-dark theme + T7462: Making sure we're not dividing by zero. + T7419: [TAZ Pro] [Dual Extruder] Start g-code changes: + * Wiping location changed for both extruders. + * Shear-off location is now closer to the bed. + * Added turning fan on right after shear-off + * Increased retraction after purge. + T6335: Refactoring 2641de8bb69d + T7452 updating bed temp variable to wait for temp to be reached + T7418 putting T-Glase to experimental for PRO + T6335: Icon and button size in toolbar on hi-res displays fixed. + T7000: fixed Support infill layer thickness setting + T7257: Added _layer_0 for initial heat bed warmup for all printers. Fixed extruders heatup for dual extruders. + T7257: Allow material_print_temperature_layer_0_ExtruderNumber to be used in g-code tokens. + T7367: add resolve function to "keep heating" setting + T7257: Reverting invalid changes made to TAZ6 with FlexyDually toolhead. + T7257: To be consistent with other start g-code reverting R option back to S for setting bed temperature on TAZ6 Banded Tiger. + T7188: fixed resolving error + updating first layer print variable T7257 + T7306: When changing toolhead issue an additional S1 parameter, which should indicate not to move toolhead itself when selecting hotend for dual extruder toolheads. + T7188: removed debug code + T7188: Fixed adhesion type combobox on recommended settings tab + +------------------------------------------------------------------- Old: ---- cura-lulzbot-3.6.9.obscpio New: ---- cura-lulzbot-3.6.10.obscpio ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ cura-lulzbot.spec ++++++ --- /var/tmp/diff_new_pack.w3h62u/_old 2019-06-26 16:05:10.675726508 +0200 +++ /var/tmp/diff_new_pack.w3h62u/_new 2019-06-26 16:05:10.679726514 +0200 @@ -17,7 +17,7 @@ Name: cura-lulzbot -Version: 3.6.9 +Version: 3.6.10 Release: 0 Summary: 3D printer control software License: AGPL-3.0-only ++++++ _service ++++++ --- /var/tmp/diff_new_pack.w3h62u/_old 2019-06-26 16:05:11.007726978 +0200 +++ /var/tmp/diff_new_pack.w3h62u/_new 2019-06-26 16:05:11.039727023 +0200 @@ -2,8 +2,8 @@ <service mode="disabled" name="obs_scm"> <param name="url">https://code.alephobjects.com/source/cura-lulzbot.git</param> <param name="scm">git</param> - <param name="revision">v3.6.9</param> - <param name="version">3.6.9</param> + <param name="revision">v3.6.10</param> + <param name="version">3.6.10</param> <param name="submodules">disable</param> </service> <service mode="disabled" name="set_version" /> ++++++ cura-lulzbot-3.6.9.obscpio -> cura-lulzbot-3.6.10.obscpio ++++++ /work/SRC/openSUSE:Factory/cura-lulzbot/cura-lulzbot-3.6.9.obscpio /work/SRC/openSUSE:Factory/.cura-lulzbot.new.4615/cura-lulzbot-3.6.10.obscpio differ: char 49, line 1 ++++++ cura-lulzbot.obsinfo ++++++ --- /var/tmp/diff_new_pack.w3h62u/_old 2019-06-26 16:05:11.507727686 +0200 +++ /var/tmp/diff_new_pack.w3h62u/_new 2019-06-26 16:05:11.527727714 +0200 @@ -1,5 +1,5 @@ name: cura-lulzbot -version: 3.6.9 -mtime: 1557755562 -commit: 142878d1eb95e3dc479f3b210bf4ae0f1ae4e4d1 +version: 3.6.10 +mtime: 1559844962 +commit: df49a1e8b0612d1127149d941ab89dc4a6d85dde