Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2019-10-03 14:08:27
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2352 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Thu Oct 3 14:08:27 2019 rev:47 rq:734609 version:2019.09.30
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes
2019-09-18 13:15:08.936643085 +0200
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2352/raspberrypi-firmware-config.changes
2019-10-03 14:08:29.896248659 +0200
@@ -1,0 +2,37 @@
+Wed Oct 2 12:15:54 UTC 2019 - Guillaume GARDET <[email protected]>
+
+- Update to a16470ad4 (2019-09-30)
+ * firmware: platform: Set up emmc clock earlier
+ * firmware: hdmi: Implement platform_display_power on 2711
+ See: #1224
+ * firmware: arm_loader: Pass overscan settings to the kernel
+ * firmware: arm_loader: Add option disable_fw_kms_setup to stop FKMS setup
by FW
+ * firmware: hdmi: Use pixel clock multiplier to determine the core clock
+ * firmware: Fixups for composite output mode
+ See: #1223
+ * firmware: platform: Allow display_power to be queried from gencmd
+ See: #1224
+ * firmware: arm_loader: Fix no-DT and upstream handling
+ See: #1250
+ * firmware: Round up HDMI0 minimum core clock
+ * firmware: board_info: Support bcm2710- and bcm2837- Pi 2 DTBs
+ See: raspberrypi/linux#3234
+ * firmware: power: bcm2711: Rescale the GPIO pad power
+ * firmware: brfs: Add GENET driver for 2711
+ * firmware: bootloader_state: Add network state and bootmode configuration
+ * firmware: bootloader_state: Fix mask for EEPROM header magic
+ * firmware: arm_loader: Fix initial_turbo getting stuck
+ See: #1005
+ * firmware: ldconfig: Support [edid=*] to mean any HDMI monitor
+ See: #1136
+ * firmware: image_fx: Remove restriction that output stride must match input
stride
+ * firmware: image_fx: Remove spamming log line
+ * firmware: platform: Switch to divide by one when arm_freq exceeds 2GHz
+ * firmware: Add EMMC support to 2711 Arasan EMMC driver
+ * firmware: arm_loader: Use /memory@0 if found
+ See: raspberrypi/linux#3244
+ * firmware: bootloader_state: Fix length for bootloader_config
+ * firmware: arasan_emmc: Fix STB_GPIOOVERRIDE for MMC1 in network boot
+ * firmware: bfs: Verify that eth FS has not been closed before using
+
+-------------------------------------------------------------------
raspberrypi-firmware.changes: same change
Old:
----
raspberrypi-firmware-2019.09.04.tar.bz2
New:
----
raspberrypi-firmware-2019.09.30.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-config.spec ++++++
--- /var/tmp/diff_new_pack.TnGANz/_old 2019-10-03 14:08:31.056245675 +0200
+++ /var/tmp/diff_new_pack.TnGANz/_new 2019-10-03 14:08:31.060245665 +0200
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware-config
-Version: 2019.09.04
+Version: 2019.09.30
Release: 0
Summary: Configuration for the Raspberry Pi firmware loader
License: MIT
++++++ raspberrypi-firmware.spec ++++++
--- /var/tmp/diff_new_pack.TnGANz/_old 2019-10-03 14:08:31.072245634 +0200
+++ /var/tmp/diff_new_pack.TnGANz/_new 2019-10-03 14:08:31.076245624 +0200
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware
-Version: 2019.09.04
+Version: 2019.09.30
Release: 0
Summary: Binary bootloader and firmware files for Raspberry Pi
License: SUSE-Firmware
++++++ raspberrypi-firmware-2019.09.04.tar.bz2 ->
raspberrypi-firmware-2019.09.30.tar.bz2 ++++++
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-2019.09.04.tar.bz2
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2352/raspberrypi-firmware-2019.09.30.tar.bz2
differ: char 11, line 1
