Hello community, here is the log from the commit of package fluidsynth for openSUSE:Factory checked in at 2019-11-01 15:13:18 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/fluidsynth (Old) and /work/SRC/openSUSE:Factory/.fluidsynth.new.2990 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "fluidsynth" Fri Nov 1 15:13:18 2019 rev:47 rq:743582 version:2.0.8 Changes: -------- --- /work/SRC/openSUSE:Factory/fluidsynth/fluidsynth.changes 2019-10-14 12:32:35.516098292 +0200 +++ /work/SRC/openSUSE:Factory/.fluidsynth.new.2990/fluidsynth.changes 2019-11-01 15:13:21.916694587 +0100 @@ -1,0 +2,9 @@ +Mon Oct 28 16:20:41 UTC 2019 - Tom Mbrt <[email protected]> + +- Update to 2.0.8 + * fix incorrect behavior of `fluid_sample_set_sound_data()` + * fix voices being mixed incorrectly, causing audible crackle esp. + at sample-rates >48kHz + * make sure that defining `NDEBUG` disables assertions + +------------------------------------------------------------------- Old: ---- fluidsynth-2.0.7.tar.gz New: ---- fluidsynth-2.0.8.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ fluidsynth.spec ++++++ --- /var/tmp/diff_new_pack.8YYPY9/_old 2019-11-01 15:13:22.860695818 +0100 +++ /var/tmp/diff_new_pack.8YYPY9/_new 2019-11-01 15:13:22.868695829 +0100 @@ -24,7 +24,7 @@ %endif Name: fluidsynth -Version: 2.0.7 +Version: 2.0.8 Release: 0 Summary: A Real-Time Software Synthesizer That Uses Soundfont(tm) License: LGPL-2.1-or-later ++++++ fluidsynth-2.0.7.tar.gz -> fluidsynth-2.0.8.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/CMakeLists.txt new/fluidsynth-2.0.8/CMakeLists.txt --- old/fluidsynth-2.0.7/CMakeLists.txt 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/CMakeLists.txt 2019-10-27 17:07:43.000000000 +0100 @@ -29,7 +29,7 @@ # FluidSynth package version set ( FLUIDSYNTH_VERSION_MAJOR 2 ) set ( FLUIDSYNTH_VERSION_MINOR 0 ) -set ( FLUIDSYNTH_VERSION_MICRO 7 ) +set ( FLUIDSYNTH_VERSION_MICRO 8 ) set ( VERSION "${FLUIDSYNTH_VERSION_MAJOR}.${FLUIDSYNTH_VERSION_MINOR}.${FLUIDSYNTH_VERSION_MICRO}" ) set ( FLUIDSYNTH_VERSION "\"${VERSION}\"" ) @@ -44,7 +44,7 @@ # This is not exactly the same algorithm as the libtool one, but the results are the same. set ( LIB_VERSION_CURRENT 2 ) set ( LIB_VERSION_AGE 2 ) -set ( LIB_VERSION_REVISION 0 ) +set ( LIB_VERSION_REVISION 1 ) set ( LIB_VERSION_INFO "${LIB_VERSION_CURRENT}.${LIB_VERSION_AGE}.${LIB_VERSION_REVISION}" ) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/doc/Doxyfile new/fluidsynth-2.0.8/doc/Doxyfile --- old/fluidsynth-2.0.7/doc/Doxyfile 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/doc/Doxyfile 2019-10-27 17:07:43.000000000 +0100 @@ -5,7 +5,7 @@ #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = libfluidsynth -PROJECT_NUMBER = 2.0.7 +PROJECT_NUMBER = 2.0.8 OUTPUT_DIRECTORY = api CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/doc/fluidsynth-v20-devdoc.txt new/fluidsynth-2.0.8/doc/fluidsynth-v20-devdoc.txt --- old/fluidsynth-2.0.7/doc/fluidsynth-v20-devdoc.txt 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/doc/fluidsynth-v20-devdoc.txt 2019-10-27 17:07:43.000000000 +0100 @@ -8,8 +8,8 @@ \author David Henningsson \author Tom Moebert \author Copyright © 2003-2019 Peter Hanappe, Conrad Berhörster, Antoine Schmitt, Pedro López-Cabanillas, Josh Green, David Henningsson, Tom Moebert -\version Revision 2.0.7 -\date 2019-09-25 +\version Revision 2.0.8 +\date 2019-10-27 All the source code examples in this document are in the public domain; you can use them as you please. This document is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ . The FluidSynth library is distributed under the GNU Lesser General Public License. A copy of the GNU Lesser General Public License is contained in the FluidSynth package; if not, visit http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt or write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. @@ -21,6 +21,7 @@ - \ref Disclaimer - \ref Introduction +- \ref NewIn2_0_8 - \ref NewIn2_0_7 - \ref NewIn2_0_6 - \ref NewIn2_0_5 @@ -65,6 +66,9 @@ - FluidSynth is open source, in active development. For more details, take a look at http://www.fluidsynth.org +\section NewIn2_0_8 Whats new in 2.0.8? + +- fluid_sample_set_sound_data() caused broken sound when copying sample data \section NewIn2_0_7 Whats new in 2.0.7? diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/src/rvoice/fluid_rvoice_mixer.c new/fluidsynth-2.0.8/src/rvoice/fluid_rvoice_mixer.c --- old/fluidsynth-2.0.7/src/rvoice/fluid_rvoice_mixer.c 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/src/rvoice/fluid_rvoice_mixer.c 2019-10-27 17:07:43.000000000 +0100 @@ -360,14 +360,14 @@ } /** - * Mix data down to buffers + * Mix samples down from internal dsp_buf to output buffers * * @param buffers Destination buffer(s) * @param dsp_buf Mono sample source - * @param start_block Block to start mixing at + * @param start_block starting sample in dsp_buf * @param sample_count number of samples to mix following \c start_block * @param dest_bufs Array of buffers to mixdown to - * @param dest_bufcount Length of dest_bufs + * @param dest_bufcount Length of dest_bufs (i.e count of buffers) */ static void fluid_rvoice_buffers_mix(fluid_rvoice_buffers_t *buffers, @@ -375,9 +375,11 @@ int start_block, int sample_count, fluid_real_t **dest_bufs, int dest_bufcount) { + /* buffers count to mixdown to */ int bufcount = buffers->count; int i, dsp_i; + /* if there is nothing to mix, return immediatly */ if(sample_count <= 0 || dest_bufcount <= 0) { return; @@ -386,6 +388,7 @@ FLUID_ASSERT((uintptr_t)dsp_buf % FLUID_DEFAULT_ALIGNMENT == 0); FLUID_ASSERT((uintptr_t)(&dsp_buf[start_block * FLUID_BUFSIZE]) % FLUID_DEFAULT_ALIGNMENT == 0); + /* mixdown for each buffer */ for(i = 0; i < bufcount; i++) { fluid_real_t *FLUID_RESTRICT buf = get_dest_buf(buffers, i, dest_bufs, dest_bufcount); @@ -398,11 +401,17 @@ FLUID_ASSERT((uintptr_t)buf % FLUID_DEFAULT_ALIGNMENT == 0); + /* mixdown sample_count samples in the current buffer buf + Note, that this loop could be unrolled by FLUID_BUFSIZE elements */ #pragma omp simd aligned(dsp_buf,buf:FLUID_DEFAULT_ALIGNMENT) - - for(dsp_i = (start_block * FLUID_BUFSIZE); dsp_i < sample_count; dsp_i++) + for(dsp_i = 0; dsp_i < sample_count; dsp_i++) { - buf[dsp_i] += amp * dsp_buf[dsp_i]; + // Index by blocks (not by samples) to let the compiler know that we always start accessing + // buf and dsp_buf at the FLUID_BUFSIZE*sizeof(fluid_real_t) byte boundary and never somewhere + // in between. + // A good compiler should understand: Aha, so I don't need to add a peel loop when vectorizing + // this loop. Great. + buf[start_block * FLUID_BUFSIZE + dsp_i] += amp * dsp_buf[start_block * FLUID_BUFSIZE + dsp_i]; } } } @@ -417,30 +426,42 @@ fluid_rvoice_t *rvoice, fluid_real_t **dest_bufs, unsigned int dest_bufcount, fluid_real_t *src_buf, int blockcount) { - int i, total_samples = 0, start_block = 0; + int i, total_samples = 0, last_block_mixed = 0; for(i = 0; i < blockcount; i++) { + /* render one block in src_buf */ int s = fluid_rvoice_write(rvoice, &src_buf[FLUID_BUFSIZE * i]); - if(s == -1) { - start_block += s; - s = FLUID_BUFSIZE; - } - - total_samples += s; + /* the voice is silent, mix back all the previously rendered sound */ + fluid_rvoice_buffers_mix(&rvoice->buffers, src_buf, last_block_mixed, + total_samples - (last_block_mixed*FLUID_BUFSIZE), + dest_bufs, dest_bufcount); - if(s < FLUID_BUFSIZE) + last_block_mixed = i+1; /* future block start index to mix from */ + total_samples += FLUID_BUFSIZE; /* accumulate samples count rendered */ + } + else { - break; + /* the voice wasn't quiet. Some samples have been rendered [0..FLUID_BUFSIZE] */ + total_samples += s; + if(s < FLUID_BUFSIZE) + { + /* voice has finished */ + break; + } } } - fluid_rvoice_buffers_mix(&rvoice->buffers, src_buf, -start_block, total_samples - ((-start_block)*FLUID_BUFSIZE), dest_bufs, dest_bufcount); + /* Now mix the remaining blocks from last_block_mixed to total_sample */ + fluid_rvoice_buffers_mix(&rvoice->buffers, src_buf, last_block_mixed, + total_samples - (last_block_mixed*FLUID_BUFSIZE), + dest_bufs, dest_bufcount); if(total_samples < blockcount * FLUID_BUFSIZE) { + /* voice has finished */ fluid_finish_rvoice(buffers, rvoice); } } @@ -602,7 +623,7 @@ static int fluid_mixer_buffers_init(fluid_mixer_buffers_t *buffers, fluid_rvoice_mixer_t *mixer) { - const int samplecount = FLUID_BUFSIZE * FLUID_MIXER_MAX_BUFFERS_DEFAULT; + static const int samplecount = FLUID_BUFSIZE * FLUID_MIXER_MAX_BUFFERS_DEFAULT; buffers->mixer = mixer; buffers->buf_count = mixer->buffers.buf_count; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/src/sfloader/fluid_sfont.c new/fluidsynth-2.0.8/src/sfloader/fluid_sfont.c --- old/fluidsynth-2.0.7/src/sfloader/fluid_sfont.c 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/src/sfloader/fluid_sfont.c 2019-10-27 17:07:43.000000000 +0100 @@ -608,7 +608,7 @@ goto error_rec; } - FLUID_MEMSET(sample->data, 0, storedNbFrames); + FLUID_MEMSET(sample->data, 0, storedNbFrames * sizeof(short)); FLUID_MEMCPY(sample->data + SAMPLE_LOOP_MARGIN, data, nbframes * sizeof(short)); if(data24 != NULL) @@ -627,7 +627,7 @@ /* pointers */ /* all from the start of data */ sample->start = SAMPLE_LOOP_MARGIN; - sample->end = SAMPLE_LOOP_MARGIN + storedNbFrames - 1; + sample->end = SAMPLE_LOOP_MARGIN + nbframes - 1; } else { diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/src/utils/fluid_sys.c new/fluidsynth-2.0.8/src/utils/fluid_sys.c --- old/fluidsynth-2.0.7/src/utils/fluid_sys.c 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/src/utils/fluid_sys.c 2019-10-27 17:07:43.000000000 +0100 @@ -195,6 +195,29 @@ return FLUID_FAILED; } +void* fluid_alloc(size_t len) +{ + void* ptr = malloc(len); + +#if defined(DEBUG) && !defined(_MSC_VER) + // garbage initialize allocated memory for debug builds to ease reproducing + // bugs like 44453ff23281b3318abbe432fda90888c373022b . + // + // MSVC++ already garbage initializes allocated memory by itself (debug-heap). + // + // 0xCC because + // * it makes pointers reliably crash when dereferencing them, + // * floating points are still some valid but insanely huge negative number, and + // * if for whatever reason this allocated memory is executed, it'll trigger + // INT3 (...at least on x86) + if(ptr != NULL) + { + memset(ptr, 0xCC, len); + } +#endif + return ptr; +} + /** * Convenience wrapper for free() that satisfies at least C90 requirements. * Especially useful when using fluidsynth with programming languages that do not provide malloc() and free(). diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/src/utils/fluid_sys.h new/fluidsynth-2.0.8/src/utils/fluid_sys.h --- old/fluidsynth-2.0.7/src/utils/fluid_sys.h 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/src/utils/fluid_sys.h 2019-10-27 17:07:43.000000000 +0100 @@ -739,4 +739,6 @@ #define FLUID_DEFAULT_ALIGNMENT (64U) +void* fluid_alloc(size_t len); + #endif /* _FLUID_SYS_H */ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fluidsynth-2.0.7/src/utils/fluidsynth_priv.h new/fluidsynth-2.0.8/src/utils/fluidsynth_priv.h --- old/fluidsynth-2.0.7/src/utils/fluidsynth_priv.h 2019-09-27 16:53:27.000000000 +0200 +++ new/fluidsynth-2.0.8/src/utils/fluidsynth_priv.h 2019-10-27 17:07:43.000000000 +0100 @@ -126,12 +126,13 @@ * SYSTEM INTERFACE */ -#define FLUID_MALLOC(_n) malloc(_n) +#define FLUID_MALLOC(_n) fluid_alloc(_n) #define FLUID_REALLOC(_p,_n) realloc(_p,_n) -#define FLUID_NEW(_t) (_t*)malloc(sizeof(_t)) -#define FLUID_ARRAY_ALIGNED(_t,_n,_a) (_t*)malloc((_n)*sizeof(_t) + ((unsigned int)_a - 1u)) -#define FLUID_ARRAY(_t,_n) FLUID_ARRAY_ALIGNED(_t,_n,1u) #define FLUID_FREE(_p) fluid_free(_p) + +#define FLUID_NEW(_t) (_t*)FLUID_MALLOC(sizeof(_t)) +#define FLUID_ARRAY_ALIGNED(_t,_n,_a) (_t*)FLUID_MALLOC((_n)*sizeof(_t) + ((unsigned int)_a - 1u)) +#define FLUID_ARRAY(_t,_n) FLUID_ARRAY_ALIGNED(_t,_n,1u) #define FLUID_FOPEN(_f,_m) fopen(_f,_m) #define FLUID_FCLOSE(_f) fclose(_f) #define FLUID_FREAD(_p,_s,_n,_f) fread(_p,_s,_n,_f) @@ -224,7 +225,7 @@ #define M_LN10 2.3025850929940456840179914546844 #endif -#ifdef DEBUG +#if defined(DEBUG) && !defined(NDEBUG) #define FLUID_ASSERT(a) g_assert(a) #else #define FLUID_ASSERT(a)
