Hello community,
here is the log from the commit of package raspberrypi-firmware-dt for
openSUSE:Factory checked in at 2020-03-04 09:48:07
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware-dt (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware-dt.new.26092 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware-dt"
Wed Mar 4 09:48:07 2020 rev:18 rq:781313 version:2020.02.03
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware-dt/raspberrypi-firmware-dt.changes
2020-02-28 15:22:03.373980454 +0100
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware-dt.new.26092/raspberrypi-firmware-dt.changes
2020-03-04 09:48:22.062214129 +0100
@@ -1,0 +2,6 @@
+Fri Feb 28 11:32:19 UTC 2020 - Nicolas Patricio Saenz Julienne
<[email protected]>
+
+- Add rpi4-gpio-names-overlay.dts so as to have a consistent way to access
+ GPIOs, as opposed to sysfs (bsc#1164722)
+
+-------------------------------------------------------------------
New:
----
rpi4-gpio-names-overlay.dts
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-dt.spec ++++++
--- /var/tmp/diff_new_pack.XOeNBs/_old 2020-03-04 09:48:23.874215215 +0100
+++ /var/tmp/diff_new_pack.XOeNBs/_new 2020-03-04 09:48:23.878215217 +0100
@@ -27,6 +27,7 @@
Source1: disable-vc4-overlay.dts
Source2: rpi4-cma-overlay.dts
Source3: rpi4-thermal.dts
+Source4: rpi4-gpio-names-overlay.dts
Source100: get-from-git.sh
Patch0: remove-vmmc-emmc2.patch
Patch1: pcie-dma-ranges.patch
@@ -58,7 +59,7 @@
done
export DTC_FLAGS="-R 0 -p 0 -@ -H epapr"
-for dts in arch/arm/boot/dts/overlays/*dts %{SOURCE1} %{SOURCE2} %{SOURCE3}; do
+for dts in arch/arm/boot/dts/overlays/*dts %{SOURCE1} %{SOURCE2} %{SOURCE3}
%{SOURCE4}; do
target=$(basename ${dts%*.dts})
target=${target%*-overlay}
mkdir -p $PPDIR/overlays
++++++ rpi4-gpio-names-overlay.dts ++++++
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2711";
fragment@0 {
target = <&gpio>;
__overlay__ {
/*
* Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
* the official GPU firmware DT blob.
*
* Legend:
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active
low
*/
gpio-line-names = "ID_SDA",
"ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
"GPIO5",
"GPIO6",
"SPI_CE1_N",
"SPI_CE0_N",
"SPI_MISO",
"SPI_MOSI",
"SPI_SCLK",
"GPIO12",
"GPIO13",
/* Serial port */
"TXD1",
"RXD1",
"GPIO16",
"GPIO17",
"GPIO18",
"GPIO19",
"GPIO20",
"GPIO21",
"GPIO22",
"GPIO23",
"GPIO24",
"GPIO25",
"GPIO26",
"GPIO27",
"RGMII_MDIO",
"RGMIO_MDC",
/* Used by BT module */
"CTS0",
"RTS0",
"TXD0",
"RXD0",
/* Used by Wifi */
"SD1_CLK",
"SD1_CMD",
"SD1_DATA0",
"SD1_DATA1",
"SD1_DATA2",
"SD1_DATA3",
/* Shared with SPI flash */
"PWM0_MISO",
"PWM1_MOSI",
"STATUS_LED_G_CLK",
"SPIFLASH_CE_N",
"SDA0",
"SCL0",
"RGMII_RXCLK",
"RGMII_RXCTL",
"RGMII_RXD0",
"RGMII_RXD1",
"RGMII_RXD2",
"RGMII_RXD3",
"RGMII_TXCLK",
"RGMII_TXCTL",
"RGMII_TXD0",
"RGMII_TXD1",
"RGMII_TXD2",
"RGMII_TXD3";
};
};
};
