Hello community, here is the log from the commit of package smp_utils for openSUSE:Factory checked in at 2020-04-25 20:07:07 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/smp_utils (Old) and /work/SRC/openSUSE:Factory/.smp_utils.new.2738 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "smp_utils" Sat Apr 25 20:07:07 2020 rev:22 rq:795511 version:0.99 Changes: -------- --- /work/SRC/openSUSE:Factory/smp_utils/smp_utils.changes 2018-08-15 10:32:29.287648328 +0200 +++ /work/SRC/openSUSE:Factory/.smp_utils.new.2738/smp_utils.changes 2020-04-25 20:07:17.463419914 +0200 @@ -1,0 +2,38 @@ +Thu Apr 16 13:33:25 UTC 2020 - Martin Pluskal <[email protected]> + +- Update to version 0.99: + - smp_discover(_list): add --dsn option to show + device slot number in single line per phy summary + - attached SAS device type, word SAS added (spl4r01) + - add SAS connector types, shared with NVMe (ses3r8) + - add buffered phy burst size field (spl4r07) + - add attached apta capable field + - update phy capabilities decode (spl5r02) + - use Report general to get number phys rather + than loop until an error occurs + - smp_rep_general: add extended fairness field + - add initial time to delay expander forward open + indication field + - add external port field (spl5r02) + - smp_phy_test: change default linkrate from 3 to 6 Gbps + which is value 0xa + - smp_conf_phy_event: fix file pointer leak + - add G5 (22.5 Gbps for SAS-4) settings [spl4r06] + - convert many two valued ints to bools + - smp_lib: + - add smp_get_connector_type_str(), smp_get_num_nomult() + and smp_get_llnum_nomult() + - add dStrHexErr() and dStrHexStr() + - add hex2stdout, hex2stderr and hex2str + - add smp_is_big_endian(), smp_all_zeros() and + smp_all_ffs() + - add sg_unaligned.h and sg_pr2serr.h headers + - change connector name: 'SAS SlimLine' to 'SlimSAS' + - sync with spl5r08 + - cleanup configure.ac + Makefile.am + - update BSD license from 3 to 2 clause aka FreeBSD + license (without reference to FreeBSD project) + - debian: bump compat file contents from 7 to 10 +- Drop no longer needed sysmacros.patch + +------------------------------------------------------------------- Old: ---- smp_utils-0.98.tar.xz sysmacros.patch New: ---- smp_utils-0.99.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ smp_utils.spec ++++++ --- /var/tmp/diff_new_pack.v1zIXU/_old 2020-04-25 20:07:19.011423106 +0200 +++ /var/tmp/diff_new_pack.v1zIXU/_new 2020-04-25 20:07:19.015423114 +0200 @@ -1,7 +1,7 @@ # # spec file for package smp_utils # -# Copyright (c) 2018 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2020 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -12,36 +12,32 @@ # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. -# Please submit bugfixes or comments via http://bugs.opensuse.org/ +# Please submit bugfixes or comments via https://bugs.opensuse.org/ # -Name: smp_utils %define lname libsmputils1-1 -Version: 0.98 +Name: smp_utils +Version: 0.99 Release: 0 Summary: Utilities for the SAS Management Protocol (SMP) License: BSD-3-Clause AND GPL-2.0-only Group: Hardware/Other - -Source: http://sg.danny.cz/sg/p/%name-%version.tar.xz -Patch: sysmacros.patch -BuildRoot: %{_tmppath}/%{name}-%{version}-build -BuildRequires: xz -Provides: scsi:/usr/bin/smp_conf_general -Provides: scsi:/usr/bin/smp_conf_route_info -Provides: scsi:/usr/bin/smp_discover -Provides: scsi:/usr/bin/smp_discover_list -Provides: scsi:/usr/bin/smp_phy_control -Provides: scsi:/usr/bin/smp_phy_test -Provides: scsi:/usr/bin/smp_read_gpio -Provides: scsi:/usr/bin/smp_rep_exp_route_tbl -Provides: scsi:/usr/bin/smp_rep_general -Provides: scsi:/usr/bin/smp_rep_manufacturer -Provides: scsi:/usr/bin/smp_rep_phy_err_log -Provides: scsi:/usr/bin/smp_rep_phy_sata -Provides: scsi:/usr/bin/smp_rep_route_info -Provides: scsi:/usr/bin/smp_write_gpio +Source: http://sg.danny.cz/sg/p/%{name}-%{version}.tar.xz +Provides: scsi:%{_bindir}/smp_conf_general +Provides: scsi:%{_bindir}/smp_conf_route_info +Provides: scsi:%{_bindir}/smp_discover +Provides: scsi:%{_bindir}/smp_discover_list +Provides: scsi:%{_bindir}/smp_phy_control +Provides: scsi:%{_bindir}/smp_phy_test +Provides: scsi:%{_bindir}/smp_read_gpio +Provides: scsi:%{_bindir}/smp_rep_exp_route_tbl +Provides: scsi:%{_bindir}/smp_rep_general +Provides: scsi:%{_bindir}/smp_rep_manufacturer +Provides: scsi:%{_bindir}/smp_rep_phy_err_log +Provides: scsi:%{_bindir}/smp_rep_phy_sata +Provides: scsi:%{_bindir}/smp_rep_route_info +Provides: scsi:%{_bindir}/smp_write_gpio %description The smp_utils package contains utilities for the Serial Attached SCSI @@ -50,11 +46,11 @@ well processing the response. The response is either decoded, printed out in ASCII hexadecimal or sent as binary to stdout. -%package -n %lname +%package -n %{lname} Summary: Library for SAS SMP control of expanders Group: System/Libraries -%description -n %lname +%description -n %{lname} The smp_utils package contains utilities for the Serial Attached SCSI (SAS) Management Protocol (SMP). @@ -63,7 +59,7 @@ %package -n libsmputils-devel Summary: Development files for the SAS SMP Expander Control Library Group: Development/Libraries/C and C++ -Requires: %lname = %version +Requires: %{lname} = %{version} %description -n libsmputils-devel The smp_utils package contains utilities for the Serial Attached SCSI @@ -74,32 +70,26 @@ %prep %setup -q -%patch -p1 %build -# None of these is performance-critical, so use -Os rather than -O2: -export CFLAGS=$(echo "%optflags" | sed 's/\-O2/-Os/') %configure --disable-static -make %{?_smp_mflags} +%make_build %install -make install DESTDIR="%buildroot" -rm -f "%buildroot/%_libdir"/*.la +%make_install +find %{buildroot} -type f -name "*.la" -delete -print %files -%defattr(-,root,root) # smp_utils %doc README ChangeLog -%_bindir/smp_* -%_mandir/man8/*.8* +%{_bindir}/smp_* +%{_mandir}/man8/*.8%{?ext_man} -%files -n %lname -%defattr(-,root,root) -%_libdir/libsmputils1.so.1* +%files -n %{lname} +%{_libdir}/libsmputils1.so.1* %files -n libsmputils-devel -%defattr(-,root,root) -%_includedir/scsi/ -%_libdir/libsmputils1.so +%{_includedir}/scsi/ +%{_libdir}/libsmputils1.so %changelog ++++++ smp_utils-0.98.tar.xz -> smp_utils-0.99.tar.xz ++++++ ++++ 46228 lines of diff (skipped)
