Hello community, here is the log from the commit of package uhubctl for openSUSE:Factory checked in at 2020-05-26 17:20:45 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/uhubctl (Old) and /work/SRC/openSUSE:Factory/.uhubctl.new.2738 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "uhubctl" Tue May 26 17:20:45 2020 rev:3 rq:808358 version:2.2.0 Changes: -------- --- /work/SRC/openSUSE:Factory/uhubctl/uhubctl.changes 2019-09-05 12:34:43.203568596 +0200 +++ /work/SRC/openSUSE:Factory/.uhubctl.new.2738/uhubctl.changes 2020-05-26 17:20:46.760163001 +0200 @@ -1,0 +2,7 @@ +Sat May 23 07:51:01 UTC 2020 - Martin Hauke <[email protected]> + +- Update to version 2.2.0 + * Added support for Raspberry Pi 4B + * Added many more devices to supported table + +------------------------------------------------------------------- Old: ---- uhubctl-2.1.0.tar.gz New: ---- uhubctl-2.2.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ uhubctl.spec ++++++ --- /var/tmp/diff_new_pack.k1JWIa/_old 2020-05-26 17:20:47.336164239 +0200 +++ /var/tmp/diff_new_pack.k1JWIa/_new 2020-05-26 17:20:47.340164248 +0200 @@ -1,7 +1,7 @@ # # spec file for package uhubctl # -# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany. +# Copyright (c) 2020 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: uhubctl -Version: 2.1.0 +Version: 2.2.0 Release: 0 Summary: USB hub per-port power control License: GPL-2.0-only ++++++ uhubctl-2.1.0.tar.gz -> uhubctl-2.2.0.tar.gz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/LICENSE new/uhubctl-2.2.0/LICENSE --- old/uhubctl-2.1.0/LICENSE 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/LICENSE 2020-05-22 22:39:47.000000000 +0200 @@ -1,6 +1,6 @@ uhubctl – USB hub per-port power control. -Copyright (c) 2009-2019, Vadim Mikhailov +Copyright (c) 2009-2020, Vadim Mikhailov This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/Makefile new/uhubctl-2.2.0/Makefile --- old/uhubctl-2.1.0/Makefile 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/Makefile 2020-05-22 22:39:47.000000000 +0200 @@ -14,14 +14,14 @@ CC ?= gcc CFLAGS ?= -g -O0 CFLAGS += -Wall -Wextra -std=c99 -pedantic -GIT_VERSION := $(shell git describe --abbrev=8 --dirty --always --tags) +GIT_VERSION := $(shell git describe --match "v[0-9]*" --abbrev=8 --dirty --always --tags | cut -c2-) ifeq ($(GIT_VERSION),) GIT_VERSION := $(shell cat VERSION) endif CFLAGS += -DPROGRAM_VERSION=\"$(GIT_VERSION)\" ifeq ($(UNAME_S),Linux) - LDFLAGS += -Wl,-z,relro -lusb-1.0 + LDFLAGS += -Wl,-zrelro,-znow -lusb-1.0 endif ifeq ($(UNAME_S),Darwin) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/README.md new/uhubctl-2.2.0/README.md --- old/uhubctl-2.1.0/README.md 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/README.md 2020-05-22 22:39:47.000000000 +0200 @@ -20,27 +20,38 @@ |:-------------------|:-----------------------------------------------------|:------|:----|:----------|:--------|:-----| | AmazonBasics | HU3641V1 ([RPi issue](https://goo.gl/CLt46M)) | 4 | 3.0 |`2109:2811`| 2013 | | | AmazonBasics | HU3770V1 ([RPi issue](https://goo.gl/CLt46M)) | 7 | 3.0 |`2109:2811`| 2013 | | +| AmazonBasics | HU9002V1SBL ([RPi issue](https://goo.gl/CLt46M)) | 10 | 3.1 |`2109:2817`| 2018 | | +| AmazonBasics | HUC9002V1ESL ([RPi issue](https://goo.gl/CLt46M)) | 10 | 3.1 |`2109:2817`| 2018 | | | Apple | Thunderbolt Display 27" (internal USB hub) | 6 | 2.0 | | 2011 | 2016 | | Apple | USB Keyboard With Numeric Pad (internal USB hub) | 3 | 2.0 | | 2011 | | | Asus | Z87-PLUS Motherboard (onboard USB hub) | 4 | 3.0 | | 2013 | 2016 | | B+B SmartWorx | UHR204 | 4 | 2.0 |`0856:DB00`| 2013 | | | B+B SmartWorx | USH304 | 4 | 3.0 |`04B4:6506`| 2017 | | +| Basler | 2000036234 | 4 | 3.0 |`0451:8046`| 2016 | | +| Belkin | F5U101 | 4 | 2.0 |`0451:2046`| 2005 | 2010 | | Belkin | F5U701-BLK | 7 | 2.0 | | 2008 | 2012 | +| Buffalo | BSH4A05U3BK | 4 | 3.0 |`05E3:0610`| 2015 | | +| Bytecc | BT-UH340 | 4 | 3.0 |`2109:8110`| 2010 | | | Circuitco | Beagleboard-xM (internal USB hub) | 4 | 2.0 |`0424:9514`| 2010 | | | Club3D | CSV-3242HD Dual Display Docking Station | 4 | 3.0 |`2109:2811`| 2015 | | | CyberPower | CP-H420P | 4 | 2.0 |`0409:0059`| 2004 | | | Cypress | CY4608 HX2VL development kit | 4 | 2.0 |`04B4:6570`| 2012 | | -| D-Link | DUB-H4 rev D1 (black edition) | 4 | 2.0 |`05E3:0608`| 2012 | | -| D-Link | DUB-H7 rev A (silver edition) | 7 | 2.0 |`2001:F103`| 2005 | 2010 | -| D-Link | DUB-H7 rev D1 (black edition) | 7 | 2.0 |`05E3:0608`| 2012 | | +| D-Link | DUB-H4 rev B (silver) | 4 | 2.0 |`05E3:0605`| 2005 | 2010 | +| D-Link | DUB-H4 rev D,E (black). Note: rev A,C not supported | 4 | 2.0 |`05E3:0608`| 2012 | | +| D-Link | DUB-H7 rev A (silver) | 7 | 2.0 |`2001:F103`| 2005 | 2010 | +| D-Link | DUB-H7 rev D (black). Note: rev B,C not supported | 7 | 2.0 |`05E3:0608`| 2012 | | | Dell | P2416D 24" QHD Monitor | 4 | 2.0 | | 2017 | | | Dell | UltraSharp 1704FPT 17" LCD Monitor | 4 | 2.0 |`0424:A700`| 2005 | 2015 | +| Dell | UltraSharp U2415 24" LCD Monitor | 5 | 3.0 | | 2014 | | | Elecom | U2H-G4S | 4 | 2.0 | | 2006 | 2011 | | GlobalScale | ESPRESSObin SBUD102 V5 | 1 | 3.0 |`1D6B:0003`| 2017 | | | Hawking Technology | UH214 | 4 | 2.0 | | 2003 | 2008 | | IOI | U3H415E1 | 4 | 3.0 | | 2012 | | | j5create | JUH470 (works only in USB2 mode) | 3 | 3.0 |`05E3:0610`| 2014 | | -| Lenovo | ThinkPad EU Ultra Dockingstation (40A20090EU) | 6 | 2.0 |`17EF:100F`| 2015 | | +| Juiced Systems | 6HUB-01 | 7 | 3.0 |`0BDA:0411`| 2014 | 2018 | +| LG Electronics | 38WK95C-W monitor | 4 | 3.0 |`0451:8142`| 2018 | | +| Lenovo | ThinkPad Ultra Docking Station (40A20090EU) | 6 | 2.0 |`17EF:100F`| 2015 | | +| Lenovo | ThinkPad Ultra Docking Station (40AJ0135EU) | 7 | 3.1 |`17EF:3070`| 2018 | | | Lenovo | ThinkPad X200 Ultrabase 42X4963 | 3 | 2.0 |`17EF:1005`| 2008 | 2011 | | Lenovo | ThinkPad X6 Ultrabase 42W3107 | 4 | 2.0 |`17EF:1000`| 2006 | 2009 | | Lindy | USB serial converter 4 port | 4 | 1.1 |`058F:9254`| 2008 | | @@ -52,12 +63,13 @@ | Plugable | USB3-HUB7BC | 7 | 3.0 |`2109:0813`| 2015 | | | Plugable | USB3-HUB7C | 7 | 3.0 |`2109:0813`| 2015 | | | Plugable | USB3-HUB7-81X | 7 | 3.0 |`2109:0813`| 2012 | | -| Plugable | USB2-HUB10S | 10 | 2.0 | | 2010 | | -| Raspberry Pi | Model B+, 2 B, 3 B (port 2 only) | 4 | 2.0 | | 2011 | | -| Raspberry Pi | Model 3 B+ | 6 | 2.0 |`0424:2514`| 2018 | | +| Raspberry Pi | B+, 2B, 3B ([see below](#raspberry-pi-b2b3b)) | 4 | 2.0 | | 2011 | | +| Raspberry Pi | 3B+ ([see below](#raspberry-pi-3b)) | 4 | 2.0 |`0424:2514`| 2018 | | +| Raspberry Pi | 4B ([see below](#raspberry-pi-4b)) | 4 | 3.0 |`2109:3431`| 2019 | | | Renesas | uPD720202 PCIe USB 3.0 host controller | 2 | 3.0 | | 2013 | | | Rosewill | RHUB-210 | 4 | 2.0 |`0409:005A`| 2011 | 2014 | | Sanwa Supply | USB-HUB14GPH | 4 | 1.1 | | 2001 | 2003 | +| Seagate | Backup Plus Hub STEL8000100 | 2 | 3.0 |`0BC2:AB44`| 2016 | | | StarTech | ST4200USBM | 4 | 2.0 |`0409:005A`| 2004 | | | Sunix | SHB4200MA | 4 | 2.0 |`0409:0058`| 2006 | 2009 | | Targus | PAUH212U | 7 | 2.0 | | 2004 | 2009 | @@ -67,12 +79,11 @@ If your hub works with `uhubctl`, but is not listed above, please report it by opening new issue at https://github.com/mvp/uhubctl/issues, so we can add it to supported table. In your report, please provide -exact product model and add output from `uhubctl`. +exact product model and add output from `uhubctl` +and please test VBUS off support as described below in FAQ. Note that quite a few modern motherboards have built-in root hubs that do support this feature - you may not even need to buy any external hub. -WARNING: turning off built-in USB ports may cut off your keyboard or mouse, -so be careful what ports you are turning off! USB 3.0 duality note @@ -99,11 +110,18 @@ [necessary USB control requests](https://social.msdn.microsoft.com/Forums/sqlserver/en-US/f680b63f-ca4f-4e52-baa9-9e64f8eee101). This may be fixed if `libusb` starts supporting different driver on Windows. -First, you need to install library libusb-1.0 (version 1.0.12 or later): +First, you need to install library libusb-1.0 (version 1.0.12 or later, 1.0.16 or later is recommended): * Ubuntu: `sudo apt-get install libusb-1.0-0-dev` * Redhat: `sudo yum install libusb1-devel` * MacOSX: `brew install libusb`, or `sudo port install libusb-devel` + > :warning: `libusb-1.0.23` is [broken](https://github.com/libusb/libusb/issues/707) on MacOS Catalina! + You have to install `libusb-1.0.22` until [libusb issue 707](https://github.com/libusb/libusb/issues/707) is fixed, + or use this workaround to force use of older Mojave build: + + brew uninstall --ignore-dependencies libusb + brew install https://raw.githubusercontent.com/Homebrew/homebrew-core/5314f1d/Formula/libusb.rb + * FreeBSD: libusb is included by default * NetBSD: `sudo pkgin install libusb1 gmake pkg-config` * Windows: TBD? @@ -134,6 +152,9 @@ `cycle` means turn power off, wait some delay (configurable with `-d`) and turn it back on. Ports can be comma separated list, and may use `-` for ranges e.g. `2`, or `2,4`, or `2-5`, or `1-2,5-8`. +> :warning: Turning off built-in USB ports may cut off your keyboard or mouse, +so be careful which ports you are turning off! + If you have more than one smart USB hub connected, you should choose specific hub to control using `-l` (location) parameter. To find hub locations, simply run `uhubctl` without any parameters. @@ -240,12 +261,18 @@ `uhubctl` will try to turn power off many times in quick succession, and it should suppress that. This may be eventually fixed in kernel, see more discussion [here](https://bit.ly/2JzczjZ). +If your device is USB mass storage, invoking `udisksctl` before calling `uhubctl` +might help to mitigate this issue: + + sudo udisksctl power-off --block-device /dev/disk/...` + sudo uhubctl -a off ... + #### _Multiple 4-port hubs are detected, but I only have one 7-port hub connected_ Many hub manufacturers build their USB hubs using basic 4 port USB chips. E.g. to make 7 port hub, they daisy-chain two 4 port hubs - 1 port is lost to daisy-chaining, -so it makes it 4+4-1=7 port hub. Simularly, 10 port hub could be built as 3 4-port hubs +so it makes it 4+4-1=7 port hub. Similarly, 10 port hub could be built as 3 4-port hubs daisy-chained together, which gives 4+4+4-2=10 usable ports. Note that you should never try to change power state for ports used to daisy-chain internal hubs together. @@ -255,20 +282,48 @@ #### _Raspberry Pi turns power off on all ports, not just the one I specified_ This is limitation of Raspberry Pi hardware design. -For reference, Raspberry Pi models have following internal USB topology: -* B+/2B/3B: one USB hub `1-1`, with port `1` for Ethernet+wifi, and ports `2-5` ganged, controlled by port `2`. - (Trying to control ports 3,4,5 won't do anything). -* 3B+: 2 hubs - main hub `1-1`, all 4 ports ganged, all controlled by port `2`. - Second hub `1-1.1` (daisy-chained to main): 3 independently controlled ports, `1` is used for Ethernet+wifi, - and ports `2,3` are available with proper per-port power switching. - In other words, 2 out of total 4 ports wired outside do support independent power switching on 3B+. -* 4B: Hardware supports power switching, but current firmware is reporting broken USB descriptors. - For more details see Raspberry Pi issue https://github.com/raspberrypi/linux/issues/3079. - USB3 hub `2`, 4 ports, per-port power switching. BOS `ContainerID` not reported (required for USB3). - USB2 hub `1`, 1 port, no usable ports, connects hub `1-1` below. - USB2 hub `1-1`, 4 ports, dual to USB3 hub above. Hub descriptor incorrectly reports ganged power switching. - USB2 hub `3`, 1 port, OTG controller, incorrectly reports ganged power switching. +For reference, supported Raspberry Pi models have following internal USB topology: + +##### Raspberry Pi B+,2B,3B + + * Single hub `1-1`, ports 2-5 ganged, all controlled by port `2`: + + uhubctl -l 1-1 -p 2 -a 0 + + Trying to control ports `3`,`4`,`5` will not do anything. + Port `1` controls power for Ethernet+WiFi. + +##### Raspberry Pi 3B+ + + * Main hub `1-1`, all 4 ports ganged, all controlled by port `2` (turns off secondary hub ports as well). + Port `1` connects hub `1-1.1` below, ports `2` and `3` are wired outside, port `4` not wired. + + uhubctl -l 1-1 -p 2 -a 0 + + * Secondary hub `1-1.1` (daisy-chained to main): 3 ports, + port `1` is used for Ethernet+WiFi, and ports `2` and `3` are wired outside. + + +##### Raspberry Pi 4B + + > :warning: You may need to [update firmware](https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md) +to vl805 00137ac or later to make power switching work on RPi 4B. + + * USB2 hub `1`, 1 port, only connects hub `1-1` below. + + * USB2 hub `1-1`, 4 ports ganged, dual to USB3 hub `2` below: + + uhubctl -l 1-1 -a 0 + + * USB3 hub `2`, 4 ports ganged, dual to USB2 hub `1-1` above: + + uhubctl -l 2 -a 0 + + * USB2 hub `3`, 1 port, OTG controller: + + uhubctl -l 3 -p 1 -a 0 + As a workaround, you can buy any external USB hub from supported list, attach it to any USB port of Raspberry Pi, and control power on its ports independently. @@ -285,20 +340,22 @@ | [Build Status Light](https://goo.gl/3GA82o) | Create a build status light in under 10 minutes | | [Buildenlights](https://git.io/fj1FC) | GitLab/GitHub project build status as green/red light | | [Weather Station](https://goo.gl/3b1FzC) | Reset Weather Station when it freezes | -| [sysmoQMOD](https://goo.gl/8wvcKA) | Reset cellular modems when necessary | +| [sysmoQMOD](https://bit.ly/2VtWrVt) | Reset cellular modems when necessary | | [Smog Sensor](https://bit.ly/2EMwgCk) | Raspberry Pi based smog sensor power reset | | [Terrible Cluster](https://goo.gl/XjiXFu) | Power on/off Raspberry Pi cluster nodes as needed | -| [Ideal Music Server](https://bit.ly/2UJq6Z9) | Turn off unused USB ports to improve audio quality | +| [Ideal Music Server](https://bit.ly/39MeVFQ) | Turn off unused USB ports to improve audio quality | | [USB drives with no phantom load](https://goo.gl/qfrmGK) | Power USB drives only when needed to save power | | [USB drive data recovery](https://goo.gl/4MddLr) | Recover data from failing USB hard drive | | [Control power to 3D printer](https://git.io/fh5Tr) | OctoPrint web plugin for USB power control | | [USB fan for Raspberry Pi](https://bit.ly/2TRV6sM) | Control USB fan to avoid Raspberry Pi overheating | +| [Raspberry Pi Reboot Router](https://bit.ly/3aNbQqs) | Automatically reboot router if internet isn't working | +| [Control USB Lamp With Voice](https://bit.ly/2VtW2SX) | Voice Control of USB Lamp using Siri and Raspberry Pi | Copyright ========= -Copyright (C) 2009-2019 Vadim Mikhailov +Copyright (C) 2009-2020 Vadim Mikhailov This file can be distributed under the terms and conditions of the GNU General Public License version 2. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/VERSION new/uhubctl-2.2.0/VERSION --- old/uhubctl-2.1.0/VERSION 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/VERSION 2020-05-22 22:39:47.000000000 +0200 @@ -1 +1 @@ -v2.1.0-dev +v2.2.0-dev diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/uhubctl.c new/uhubctl-2.2.0/uhubctl.c --- old/uhubctl-2.1.0/uhubctl.c 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/uhubctl.c 2020-05-22 22:39:47.000000000 +0200 @@ -1,5 +1,5 @@ /* - * Copyright (c) 2009-2019 Vadim Mikhailov + * Copyright (c) 2009-2020 Vadim Mikhailov * * Utility to turn USB port power on/off * for USB hubs that support per-port power switching. @@ -182,7 +182,7 @@ char vendor[64]; char product[64]; char serial[64]; - char description[256]; + char description[512]; }; struct hub_info { @@ -408,9 +408,54 @@ strcat(info->location, s); } + /* Get container_id: */ + bzero(info->container_id, sizeof(info->container_id)); + struct libusb_bos_descriptor *bos; + rc = libusb_get_bos_descriptor(devh, &bos); + if (rc == 0) { + int cap; +#ifdef __FreeBSD__ + for (cap=0; cap < bos->bNumDeviceCapabilities; cap++) { +#else + for (cap=0; cap < bos->bNumDeviceCaps; cap++) { +#endif + if (bos->dev_capability[cap]->bDevCapabilityType == LIBUSB_BT_CONTAINER_ID) { + struct libusb_container_id_descriptor *container_id; + rc = libusb_get_container_id_descriptor(NULL, bos->dev_capability[cap], &container_id); + if (rc == 0) { + int i; + for (i=0; i<16; i++) { + sprintf(info->container_id+i*2, "%02x", container_id->ContainerID[i]); + } + info->container_id[i*2] = 0; + libusb_free_container_id_descriptor(container_id); + } + } + } + libusb_free_bos_descriptor(bos); + + /* Raspberry Pi 4 hack for USB3 root hub: */ + if (strlen(info->container_id)==0 && + strcasecmp(info->vendor, "1d6b:0003")==0 && + info->level==1 && + info->nports==4 && + bcd_usb==USB_SS_BCD) + { + strcpy(info->container_id, "5cf3ee30d5074925b001802d79434c30"); + } + } + info->ppps = 0; /* Logical Power Switching Mode */ int lpsm = uhd->wHubCharacteristics[0] & HUB_CHAR_LPSM; + if (lpsm == HUB_CHAR_COMMON_LPSM && info->nports == 1) { + /* For 1 port hubs, ganged power switching is the same as per-port: */ + lpsm = HUB_CHAR_INDV_PORT_LPSM; + } + /* Raspberry Pi 4 reports inconsistent descriptors, override: */ + if (lpsm == HUB_CHAR_COMMON_LPSM && strcasecmp(info->vendor, "2109:3431")==0) { + lpsm = HUB_CHAR_INDV_PORT_LPSM; + } /* Over-Current Protection Mode */ int ocpm = uhd->wHubCharacteristics[0] & HUB_CHAR_OCPM; /* LPSM must be supported per-port, and OCPM per port or ganged */ @@ -423,28 +468,6 @@ } else { rc = len; } - /* Get container_id: */ - bzero(info->container_id, sizeof(info->container_id)); - struct libusb_bos_descriptor *bos; - rc = libusb_get_bos_descriptor(devh, &bos); - if (rc == 0) { - int cap; - for (cap=0; cap < bos->bNumDeviceCaps; cap++) { - if (bos->dev_capability[cap]->bDevCapabilityType == LIBUSB_BT_CONTAINER_ID) { - struct libusb_container_id_descriptor *container_id; - rc = libusb_get_container_id_descriptor(NULL, bos->dev_capability[cap], &container_id); - if (rc == 0) { - int i; - for (i=0; i<16; i++) { - sprintf(info->container_id+i*2, "%02x", container_id->ContainerID[i]); - } - info->container_id[i*2] = 0; - libusb_free_container_id_descriptor(container_id); - } - } - } - libusb_free_bos_descriptor(bos); - } libusb_close(devh); } return rc; @@ -750,10 +773,6 @@ if (hubs[i].nports != hubs[j].nports) continue; - /* And the same level: */ - if (hubs[i].level != hubs[j].level) - continue; - /* Finally, we claim a match: */ match = j; break; @@ -895,7 +914,7 @@ opt_location ); #ifdef __gnu_linux__ - if (rc < 0) { + if (rc < 0 && geteuid() != 0) { fprintf(stderr, "There were permission problems while accessing USB.\n" "To fix this, run this tool as root using 'sudo uhubctl',\n" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/uhubctl-2.1.0/uhubctl_git.bb new/uhubctl-2.2.0/uhubctl_git.bb --- old/uhubctl-2.1.0/uhubctl_git.bb 2019-09-03 08:12:50.000000000 +0200 +++ new/uhubctl-2.2.0/uhubctl_git.bb 2020-05-22 22:39:47.000000000 +0200 @@ -2,7 +2,7 @@ HOMEPAGE = "https://github.com/mvp/uhubctl"; LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ - file://LICENSE;md5=7a7d8e0fdffe495ff61f52ceee61b2f7" + file://LICENSE;md5=a79e6a142b69522fe7757fe7313895eb" DEPENDS = "libusb1" RDEPENDS_${PN} = "libusb1"
