Hello community, here is the log from the commit of package kubevirt for openSUSE:Factory checked in at 2020-09-16 19:35:17 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/kubevirt (Old) and /work/SRC/openSUSE:Factory/.kubevirt.new.4249 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "kubevirt" Wed Sep 16 19:35:17 2020 rev:2 rq:834714 version:0.33.0 Changes: -------- --- /work/SRC/openSUSE:Factory/kubevirt/kubevirt.changes 2020-09-12 00:10:57.065124490 +0200 +++ /work/SRC/openSUSE:Factory/.kubevirt.new.4249/kubevirt.changes 2020-09-16 19:35:33.886570763 +0200 @@ -1,0 +2,174 @@ +Tue Sep 15 16:02:05 UTC 2020 - [email protected] + +- Update to version 0.33.0: + * Enhance operator functional tests to validate pods are torn down after kv cr is deleted + * Unit tests to validate finalizer functionality on kubevirt objects + * Restore ability to set finalizer on kubevirt objects + * Unit tests to verify operator injected labels remain consistent + * Restores operator managed by label for backwards/forwards compability during updates + * tests, migration: Validate dual stack VMI and Pod IP/s + * tests, make primary_pod_network dual stack compatible + * tests, Create ValidateVMIandPodIPMatch helper + * Turn off modules for staging. + * Fix verifying make targets + * Give migration kill pods a name not based on their node name + * Fix another flaky ertificate related unit test + * Fix matching of Makefile vars to env for goveralls + * Output what the new error is when an api violation occurs + * tests: adapt test-id:4153 to dual-stack cluster + * sriov-tests, checkMacAddress: remove sequential expecter cases + * sriov tests: Add CNI version to sriov NAD + * removeNamespaces: add informative failure reason + * cluster-deploy.sh: cancel cdi deployment on sriov-lane + * remove version from go.mod + * Use PingFromVMConsole for ipv6 instead of trace route + * tests, make test 1780 dual stack compatible + * refactor virtctl image-upload args + * tests,libvmi: Append passed options + * Rebase on Goveralls + * Export -mod=vendor to always use vendor + * Update ldflag to point to right package + * Increase memory limit for iscsi pod + * deps-update to reflect state after rebase + * Fix test to properly work with TLS 1.3 + * Update kubevirt builder image to use go1.13.14 + * Add required dependencies for functest image build + * Check if new api rule violation was added + * Pin bazel for builder + * selinux: relabel /dev/null to container_file_t + * selinux, virt-handler: relabel the clone device + * selinux, virt-chroot: provide a command to relabel files + * Add gradle install for builder to reenable swagger + * Set libvirt to virtmaint-sig/for-kubevirt 5.0.0 + * Update builder image to include new goveralls version, remove ppc64le + * Move coverage from travis to prow + * Support VMI scheme multi IPs list in case of dual stack + * Improve stability of fedora VM's login expecter + * tests: Use new image for sriov tests + * tests/containerdisks: add fedora-extended image + * kubevirt/BUILD.bazel: push to cluster registry + * containerdisks/ WORKSPACE, BUILD.bazel: add new image + * containerdisks: add doc about container-disk images + * Unit test to veriy migration target is cleaned when VMI is deleted + * Unit test to ensure an error is returned if multiple container disk directories for the same vmi exist + * Add unit test to verify stale clients are handled during pre migration target setup + * abort migration if the vmi is deleted or in the process of being deleted + * Add better logging to container disk mount/unmount + * wait for virt-handler to come back online during migration fail func test case + * ensure we detect the correct pod environment during isolation detection when migrating + * ensure only we're mounting/unmounting the right pod's container disk during migration + * gitignore: ignore files ending with ~ + * Ensures stale local data from failed migration target is cleaned before attempting to migrate again + * Functional test to validate migration failures + * Domain XML to be logged on info level + * Fix the test default SMBIOS testcase + * Add custom PCI tests + * Fix bug in virtctl upload when using PVC without any annotations. In this case in code the annotations map is nil, and we attempted to set a value in that nil map causing a crash of virtctl. + * Allow podman for normal build steps + * Makefile: Control timestamp addition + * Makefile: Add timestamps to make targets + * Makefile: Use realpath instead of shell to calculate path + * export local provider variables to the correct location + * no need to verify the number of depoyed nodes for local provider + * Use proper namespace in functional test + * Fix doc string + * Add --security-opt label:disable to bazel server version check On Fedora 32 with moby this fixes an selinux issue in the imega/jq container. + * Fix tests binary release + * tests: Add phoracek to approvers + * create-tap: improve code readability + * selinux: update the default launcher selinux type + * create-tap: prevent FD leaking into the tap-maker + * selinux: run virt-handler without categories + * selinux: networking requires escalated selinuxLauncherType + * selinux: create the tap device using launcher selinux label + * create-tap: add a new cmd to virt-chroot + * network: have the launcher pid for future tap device creation + * Create tap devices w/ multi-queue support + * masquerade/bridge binding: use pre-provisioned tap device + * Create tap device on virt-handler + * functests: Refactor VMI helpers + * tests: Update the vmi instance after creation + * tests: configureIPv6OnVMI remove unnecessary vmi parameter + * tests, dual-stack: configure ipv6 on dual stack cluster vmi + * Add all the missing test-ids + * dual-stack: IsIpv6Enabled use podInterface addresses. + * fix typo + * Rename managed-by label to be literal + * Don't add empty values to KubeVirtDeploymentConfig + * Use more consistent config access function + * Functional tests for product related labels + * Add ProductName and Version labels to KubeVirt objects + * Fix flaky certificate expiration unit test + * tests, job: Rename RenderJob to NewJob and expose new args + * Bump kubevirtci + * tests, job: Use status condition to detect success/failure + * use status updater to abstract enable/disable of VM status subresource + * have to call UpdateStatus as well as Update otherwise status does not get updated, duh + * UpdateStatus was not sufficient for certain snapshot controller updates + * tests, console_test: use safe expect batcher + * A low value of timeout in test setup causes failure in Azure. + * Remove hidden `make generate` invocations + * tests: change ping to use RetValue and PromptExpression + * Test improvements: Use job instead of pod and fail fast while waiting for job. + * tests: utils.RetValue no need to pass prompt + * Remove domain label from VMI metrics + * network: Add network-reviewers group + * network: Move PodIP status test to network package + * Fix clock timezone + * set schedulable to true to test node-controller will respond to out of date heartbeat + * add e2e test for virt-handler schedulable=false + * virt-handler mark node as unschedulable until it is able to talk with kubelet + * tests, ping: Extend the ping helper and generalize it + * Check if the socket exists and not if the base directory exists + * [virt-hanlder] test probing of cmd server socket + * [virt-handler] test contanerDisk readiness checks + * tests: [test_id:1778] remove redundant `sudo` and wait for prompt + * tests: ExpectBatchWithValidatedSend error on BatchExpect other than BExp + * [virt-handler] wait for containerDisks to become ready + * [virt-handler] let virt-handler probe for virt-launcher readiness + * [virt-launcher] Replace --readiness-file logic with socket moving + * [virt-controller] Remove readiness probes and --readiness-file flag + * Remove exec readiness probe on the containerDisk container + * tests, ping: Use tests.PingFromVMConsole directly + * tests, ping: Move the ping helper to the tests package + * Add test approvers + * Let prow run make generate instead of travis + * tests: avoid line wrap on fedora console + * tests, Fix test 1780 of vmi_networking_test.go + * Unit test for ensuring local cleanup of vmi does not occur on non finalized vmi + * Do not perform local cleanup of vmi until vmi is in a finalized state + * network: Add dedicated network tests module + * Add support to configure vmi disk I/O mode options + * Add openapi validatior unit tests + * tests: Remove redundant string declarment in RetValue arguments + * tests: Rename tests.Retcode to tests.RetValue + * test: Fix flaky test for "A long running process" + * test: Removing redundent \n send from test_id:1779 + * test: Fix falkiness in guest memory failing tests and skip failing one + * tests: Add missing `\n` to expect.BSnd to test_id:1753 + * Shorten the release job exectuion time on travis + * k8s-reporter: get all config-map + * tests: `GenerateHelloWorldServer` use `ExpectBatchWithValidatedSend` + * tests: Avoid squential expect.BExp in test_id:1778 + * tests: Remove un-needed \n send from "Checking console text" expecter + * tests: using `Retcode` to check the result of "echo $?" + * tests: Changing `retcode` to contain the prompt + * tests: Using ExpectBatchWithValidatedSend instead of expecter.ExpectBatch + * test: Configure console on login + * tests: Intorduce safe ExpectBatchWithValidatedSend + * Bump kubevirtci to support dual stack on k8s-1.18 + * Let virt-operator roll out the status subresource activation + * Enable the status subresource feature for the CRDs + * Let virt-controller use the new UpdateStatus client functions + * Make use of the /status subresource in the virt-api subresources + * Add validation webhooks for /status updates + * Add status updater helper functions + * Add UpdateStatus and PatchStatus to the kubevirt client + * vmiMetrics struct was recreated with better attributes + * tests: Create containerdisk sub-package + * tests: Create flags sub-package + * Give the VM rename operation more time to create a new VM + * Expose guest swap metrics + * Use 'kill' instead of 'killall' for libvirtd in func test + +------------------------------------------------------------------- Old: ---- kubevirt-0.32.0.tar.gz New: ---- kubevirt-0.33.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ kubevirt.spec ++++++ --- /var/tmp/diff_new_pack.nDkkEb/_old 2020-09-16 19:35:35.346572113 +0200 +++ /var/tmp/diff_new_pack.nDkkEb/_new 2020-09-16 19:35:35.350572116 +0200 @@ -17,7 +17,7 @@ Name: kubevirt -Version: 0.32.0 +Version: 0.33.0 Release: 0 Summary: Container native virtualization License: Apache-2.0 @@ -25,11 +25,11 @@ URL: https://github.com/kubevirt/kubevirt Source0: %{name}-%{version}.tar.gz BuildRequires: glibc-devel-static -BuildRequires: golang(API) = 1.11 BuildRequires: golang-packaging BuildRequires: pkgconfig BuildRequires: rsync BuildRequires: sed +BuildRequires: golang(API) = 1.13 BuildRequires: pkgconfig(libvirt) ExclusiveArch: x86_64 @@ -38,42 +38,49 @@ %package virtctl Summary: Client for managing kubevirt +Group: System/Packages %description virtctl The virtctl client is a command-line utility for managing container native virtualization resources %package virt-api Summary: Kubevirt API server +Group: System/Packages %description virt-api The virt-api package provides the kubernetes API extension for kubevirt %package container-disk Summary: Container disk for kubevirt +Group: System/Packages %description container-disk The containter-disk package provides a container disk functionality for kubevirt %package virt-controller Summary: Controller for kubevirt +Group: System/Packages %description virt-controller The virt-controller package provides a controller for kubevirt %package virt-handler Summary: Handler component for kubevirt +Group: System/Packages %description virt-handler The virt-handler package provides a handler for kubevirt %package virt-launcher Summary: Launcher component for kubevirt +Group: System/Packages %description virt-launcher The virt-launcher package provides a launcher for kubevirt %package virt-operator Summary: Operator component for kubevirt +Group: System/Packages %description virt-operator The virt-opertor package provides an operator for kubevirt CRD @@ -85,6 +92,7 @@ mkdir -p go/src/kubevirt.io go/pkg ln -s ../../../ go/src/kubevirt.io/kubevirt export GOPATH=${PWD}/go +export GOFLAGS="-buildmode=pie" cd ${GOPATH}/src/kubevirt.io/kubevirt env \ KUBEVIRT_GO_BASE_PKGDIR="${GOPATH}/pkg" \ @@ -127,7 +135,6 @@ chmod 0755 _out/cmd/csv-generator/csv-generator install -p -m 0755 _out/cmd/csv-generator/csv-generator %{buildroot}%{_bindir}/ - %files virtctl %license LICENSE %doc README.md ++++++ _service ++++++ --- /var/tmp/diff_new_pack.nDkkEb/_old 2020-09-16 19:35:35.378572143 +0200 +++ /var/tmp/diff_new_pack.nDkkEb/_new 2020-09-16 19:35:35.382572146 +0200 @@ -1,7 +1,7 @@ <services> <service name="tar_scm" mode="disabled"> <param name="filename">kubevirt</param> - <param name="revision">v0.32.0</param> + <param name="revision">v0.33.0</param> <param name="scm">git</param> <param name="submodules">disable</param> <param name="url">https://github.com/kubevirt/kubevirt</param> ++++++ _servicedata ++++++ --- /var/tmp/diff_new_pack.nDkkEb/_old 2020-09-16 19:35:35.398572161 +0200 +++ /var/tmp/diff_new_pack.nDkkEb/_new 2020-09-16 19:35:35.402572164 +0200 @@ -1,4 +1,4 @@ <servicedata> <service name="tar_scm"> <param name="url">https://github.com/kubevirt/kubevirt</param> - <param name="changesrevision">3935f4337ede364fa9a3442f5e8642e03d3c4070</param></service></servicedata> \ No newline at end of file + <param name="changesrevision">335d28d2c084ac2f4373d90d724e70d491164107</param></service></servicedata> \ No newline at end of file ++++++ kubevirt-0.32.0.tar.gz -> kubevirt-0.33.0.tar.gz ++++++ /work/SRC/openSUSE:Factory/kubevirt/kubevirt-0.32.0.tar.gz /work/SRC/openSUSE:Factory/.kubevirt.new.4249/kubevirt-0.33.0.tar.gz differ: char 12, line 1
