Hello community, here is the log from the commit of package evas-generic-loaders for openSUSE:Factory checked in at 2013-04-08 14:02:00 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/evas-generic-loaders (Old) and /work/SRC/openSUSE:Factory/.evas-generic-loaders.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "evas-generic-loaders", Maintainer is "" Changes: -------- --- /work/SRC/openSUSE:Factory/evas-generic-loaders/evas-generic-loaders.changes 2013-01-10 10:58:49.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.evas-generic-loaders.new/evas-generic-loaders.changes 2013-04-08 14:02:00.000000000 +0200 @@ -1,0 +2,6 @@ +Sat Apr 6 03:06:00 UTC 2013 - si...@simotek.net + +- update to 1.7.6 + no changes, just keeping version in sync + +------------------------------------------------------------------- Old: ---- evas_generic_loaders-1.7.5.tar.bz2 New: ---- evas_generic_loaders-1.7.6.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ evas-generic-loaders.spec ++++++ --- /var/tmp/diff_new_pack.9kiicC/_old 2013-04-08 14:02:02.000000000 +0200 +++ /var/tmp/diff_new_pack.9kiicC/_new 2013-04-08 14:02:02.000000000 +0200 @@ -17,7 +17,7 @@ Name: evas-generic-loaders -Version: 1.7.5 +Version: 1.7.6 Release: 0 Summary: Set of generic loaders for Evas License: GPL-2.0+ ++++++ evas_generic_loaders-1.7.5.tar.bz2 -> evas_generic_loaders-1.7.6.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/ChangeLog new/evas_generic_loaders-1.7.6/ChangeLog --- old/evas_generic_loaders-1.7.5/ChangeLog 2013-01-04 15:01:53.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/ChangeLog 2013-04-04 22:49:46.000000000 +0200 @@ -52,3 +52,7 @@ * 1.7.5 release + +2013-04-04 Rafael Antognolli + + * 1.7.6 release diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/Makefile.in new/evas_generic_loaders-1.7.6/Makefile.in --- old/evas_generic_loaders-1.7.5/Makefile.in 2013-01-04 15:26:44.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -15,6 +15,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -65,6 +82,11 @@ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -485,13 +507,10 @@ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ @@ -577,7 +596,7 @@ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) + chmod -R a-w $(distdir); chmod u+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/aclocal.m4 new/evas_generic_loaders-1.7.6/aclocal.m4 --- old/evas_generic_loaders-1.7.5/aclocal.m4 2013-01-04 15:26:42.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/aclocal.m4 2013-04-05 00:40:16.000000000 +0200 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.11.3 -*- Autoconf -*- +# generated automatically by aclocal 1.11.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, @@ -48,8 +48,7 @@ # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) @@ -95,8 +94,7 @@ pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) else pkg_failed=untried @@ -144,9 +142,9 @@ AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD @@ -159,7 +157,7 @@ Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -_PKG_TEXT])[]dnl +_PKG_TEXT]) ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) @@ -170,7 +168,7 @@ _PKG_TEXT -To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl +To get pkg-config, see <http://pkg-config.freedesktop.org/>.]) ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS @@ -198,7 +196,7 @@ [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.3], [], +m4_if([$1], [1.11.6], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -214,7 +212,7 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.3])dnl +[AM_AUTOMAKE_VERSION([1.11.6])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/compile new/evas_generic_loaders-1.7.6/compile --- old/evas_generic_loaders-1.7.5/compile 2012-12-19 16:01:57.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/compile 2013-04-04 23:17:11.000000000 +0200 @@ -1,7 +1,7 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2012-01-04.17; # UTC +scriptversion=2012-03-05.13; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free # Software Foundation, Inc. @@ -79,6 +79,48 @@ esac } +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + # func_cl_wrapper cl arg... # Adjust compile command to suit cl func_cl_wrapper () @@ -109,43 +151,34 @@ ;; esac ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; -I*) func_file_conv "${1#-I}" mingw set x "$@" -I"$file" shift ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; -l*) - lib=${1#-l} - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - set x "$@" "$dir/$lib.dll.lib" - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - set x "$@" "$dir/$lib.lib" - break - fi - done - IFS=$save_IFS - - test "$found" != yes && set x "$@" "$lib.lib" + func_cl_dashl "${1#-l}" + set x "$@" "$lib" shift ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; -L*) - func_file_conv "${1#-L}" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" + func_cl_dashL "${1#-L}" ;; -static) shared=false diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/configure new/evas_generic_loaders-1.7.6/configure --- old/evas_generic_loaders-1.7.5/configure 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/configure 2013-04-05 00:40:17.000000000 +0200 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for evas_generic_loaders 1.7.5. +# Generated by GNU Autoconf 2.68 for evas_generic_loaders 1.7.6. # # Report bugs to <enlightenment-de...@lists.sourceforge.net>. # @@ -560,8 +560,8 @@ # Identity of this package. PACKAGE_NAME='evas_generic_loaders' PACKAGE_TARNAME='evas_generic_loaders' -PACKAGE_VERSION='1.7.5' -PACKAGE_STRING='evas_generic_loaders 1.7.5' +PACKAGE_VERSION='1.7.6' +PACKAGE_STRING='evas_generic_loaders 1.7.6' PACKAGE_BUGREPORT='enlightenment-de...@lists.sourceforge.net' PACKAGE_URL='' @@ -1314,7 +1314,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures evas_generic_loaders 1.7.5 to adapt to many kinds of systems. +\`configure' configures evas_generic_loaders 1.7.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1385,7 +1385,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of evas_generic_loaders 1.7.5:";; + short | recursive ) echo "Configuration of evas_generic_loaders 1.7.6:";; esac cat <<\_ACEOF @@ -1505,7 +1505,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -evas_generic_loaders configure 1.7.5 +evas_generic_loaders configure 1.7.6 generated by GNU Autoconf 2.68 Copyright (C) 2010 Free Software Foundation, Inc. @@ -1845,7 +1845,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by evas_generic_loaders $as_me 1.7.5, which was +It was created by evas_generic_loaders $as_me 1.7.6, which was generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ @@ -2667,7 +2667,7 @@ # Define the identity of the package. PACKAGE='evas_generic_loaders' - VERSION='1.7.5' + VERSION='1.7.6' cat >>confdefs.h <<_ACEOF @@ -2763,7 +2763,7 @@ cat >>confdefs.h <<_ACEOF -#define VMIC 5 +#define VMIC 6 _ACEOF @@ -2771,7 +2771,7 @@ #define VREV 0 _ACEOF -version_info="8:5:7" +version_info="8:6:7" release_info="" @@ -4227,7 +4227,6 @@ - if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. @@ -4354,13 +4353,12 @@ pkg_cv_EINA_CFLAGS="$EINA_CFLAGS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.7.5\""; } >&5 - ($PKG_CONFIG --exists --print-errors "eina >= 1.7.5") 2>&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.7.6\""; } >&5 + ($PKG_CONFIG --exists --print-errors "eina >= 1.7.6") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - pkg_cv_EINA_CFLAGS=`$PKG_CONFIG --cflags "eina >= 1.7.5" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes + pkg_cv_EINA_CFLAGS=`$PKG_CONFIG --cflags "eina >= 1.7.6" 2>/dev/null` else pkg_failed=yes fi @@ -4371,13 +4369,12 @@ pkg_cv_EINA_LIBS="$EINA_LIBS" elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.7.5\""; } >&5 - ($PKG_CONFIG --exists --print-errors "eina >= 1.7.5") 2>&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"eina >= 1.7.6\""; } >&5 + ($PKG_CONFIG --exists --print-errors "eina >= 1.7.6") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - pkg_cv_EINA_LIBS=`$PKG_CONFIG --libs "eina >= 1.7.5" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes + pkg_cv_EINA_LIBS=`$PKG_CONFIG --libs "eina >= 1.7.6" 2>/dev/null` else pkg_failed=yes fi @@ -4397,14 +4394,14 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - EINA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "eina >= 1.7.5" 2>&1` + EINA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "eina >= 1.7.6" 2>&1` else - EINA_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "eina >= 1.7.5" 2>&1` + EINA_PKG_ERRORS=`$PKG_CONFIG --print-errors "eina >= 1.7.6" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$EINA_PKG_ERRORS" >&5 - as_fn_error $? "Package requirements (eina >= 1.7.5) were not met: + as_fn_error $? "Package requirements (eina >= 1.7.6) were not met: $EINA_PKG_ERRORS @@ -4414,6 +4411,7 @@ Alternatively, you may set the environment variables EINA_CFLAGS and EINA_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details." "$LINENO" 5 + elif test $pkg_failed = untried; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -4429,6 +4427,7 @@ To get pkg-config, see <http://pkg-config.freedesktop.org/>. See \`config.log' for more details" "$LINENO" 5; } + else EINA_CFLAGS=$pkg_cv_EINA_CFLAGS EINA_LIBS=$pkg_cv_EINA_LIBS @@ -4495,7 +4494,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_POPPLER_CFLAGS=`$PKG_CONFIG --cflags "${poppler_pc}" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4512,7 +4510,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_POPPLER_LIBS=`$PKG_CONFIG --libs "${poppler_pc}" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4532,9 +4529,9 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - POPPLER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "${poppler_pc}" 2>&1` + POPPLER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "${poppler_pc}" 2>&1` else - POPPLER_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "${poppler_pc}" 2>&1` + POPPLER_PKG_ERRORS=`$PKG_CONFIG --print-errors "${poppler_pc}" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$POPPLER_PKG_ERRORS" >&5 @@ -4580,7 +4577,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_SPECTRE_CFLAGS=`$PKG_CONFIG --cflags "libspectre" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4597,7 +4593,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_SPECTRE_LIBS=`$PKG_CONFIG --libs "libspectre" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4617,9 +4612,9 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - SPECTRE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libspectre" 2>&1` + SPECTRE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libspectre" 2>&1` else - SPECTRE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libspectre" 2>&1` + SPECTRE_PKG_ERRORS=`$PKG_CONFIG --print-errors "libspectre" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$SPECTRE_PKG_ERRORS" >&5 @@ -4665,7 +4660,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBRAW_CFLAGS=`$PKG_CONFIG --cflags "libraw" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4682,7 +4676,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_LIBRAW_LIBS=`$PKG_CONFIG --libs "libraw" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4702,9 +4695,9 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - LIBRAW_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libraw" 2>&1` + LIBRAW_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libraw" 2>&1` else - LIBRAW_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libraw" 2>&1` + LIBRAW_PKG_ERRORS=`$PKG_CONFIG --print-errors "libraw" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$LIBRAW_PKG_ERRORS" >&5 @@ -4750,7 +4743,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_SVG_CFLAGS=`$PKG_CONFIG --cflags "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4767,7 +4759,6 @@ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_SVG_LIBS=`$PKG_CONFIG --libs "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4787,9 +4778,9 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - SVG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>&1` + SVG_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>&1` else - SVG_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>&1` + SVG_PKG_ERRORS=`$PKG_CONFIG --print-errors "librsvg-2.0 >= 2.14.0 cairo >= 1.0.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$SVG_PKG_ERRORS" >&5 @@ -4843,7 +4834,6 @@ pkg_cv_GSTREAMER_CFLAGS=`$PKG_CONFIG --cflags "gstreamer-$GST_MAJORMINOR >= $GST_REQS gstreamer-plugins-base-$GST_MAJORMINOR >= $GSTPLUG_REQS " 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4866,7 +4856,6 @@ pkg_cv_GSTREAMER_LIBS=`$PKG_CONFIG --libs "gstreamer-$GST_MAJORMINOR >= $GST_REQS gstreamer-plugins-base-$GST_MAJORMINOR >= $GSTPLUG_REQS " 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes else pkg_failed=yes fi @@ -4886,11 +4875,11 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gstreamer-$GST_MAJORMINOR >= $GST_REQS + GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gstreamer-$GST_MAJORMINOR >= $GST_REQS gstreamer-plugins-base-$GST_MAJORMINOR >= $GSTPLUG_REQS " 2>&1` else - GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gstreamer-$GST_MAJORMINOR >= $GST_REQS + GSTREAMER_PKG_ERRORS=`$PKG_CONFIG --print-errors "gstreamer-$GST_MAJORMINOR >= $GST_REQS gstreamer-plugins-base-$GST_MAJORMINOR >= $GSTPLUG_REQS " 2>&1` fi @@ -6430,7 +6419,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by evas_generic_loaders $as_me 1.7.5, which was +This file was extended by evas_generic_loaders $as_me 1.7.6, which was generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -6496,7 +6485,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -evas_generic_loaders config.status 1.7.5 +evas_generic_loaders config.status 1.7.6 configured by $0, generated by GNU Autoconf 2.68, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/configure.ac new/evas_generic_loaders-1.7.6/configure.ac --- old/evas_generic_loaders-1.7.5/configure.ac 2013-01-04 15:07:28.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/configure.ac 2013-04-04 21:59:40.000000000 +0200 @@ -2,7 +2,7 @@ ##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--## m4_define([v_maj], [1]) m4_define([v_min], [7]) -m4_define([v_mic], [5]) +m4_define([v_mic], [6]) m4_define([v_rev], m4_esyscmd([(svnversion "${SVN_REPO_PATH:-.}" | grep -v export || echo 0) | awk -F : '{printf("%s\n", $1);}' | tr -d ' :MSP\n'])) m4_if(v_rev, [0], [m4_define([v_rev], m4_esyscmd([git log 2> /dev/null | (grep -m1 git-svn-id || echo 0) | sed -e 's/.*@\([0-9]*\).*/\1/' | tr -d '\n']))]) ##-- When released, remove the dnl on the below line @@ -58,7 +58,7 @@ ### Checks for libraries # Eina library -PKG_CHECK_MODULES(EINA, [eina >= 1.7.5]) +PKG_CHECK_MODULES(EINA, [eina >= 1.7.6]) AC_ARG_ENABLE([poppler], [AC_HELP_STRING([--disable-poppler], [disable poppler support @<:@default==enabled@:>@])], diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/depcomp new/evas_generic_loaders-1.7.6/depcomp --- old/evas_generic_loaders-1.7.5/depcomp 2012-12-19 16:01:57.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/depcomp 2013-04-04 23:17:12.000000000 +0200 @@ -1,10 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2011-12-04.11; # UTC +scriptversion=2012-03-27.16; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, -# 2011 Free Software Foundation, Inc. +# 2011, 2012 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -28,7 +28,7 @@ case $1 in '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) @@ -40,8 +40,8 @@ Environment variables: depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputting dependencies. @@ -57,6 +57,12 @@ ;; esac +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 @@ -102,6 +108,12 @@ depmode=msvc7 fi +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what @@ -156,15 +168,14 @@ ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. +## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as ## well. hp depmode also adds that space, but also prefixes the VPATH ## to the object. Take care to not repeat it in the output. @@ -203,18 +214,15 @@ # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the + # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ + tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" + tr "$nl" ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ + tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else @@ -226,10 +234,17 @@ rm -f "$tmpdepfile" ;; +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the + # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` @@ -259,12 +274,11 @@ test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. + # Each line is of the form 'foo.o: dependent.h'. # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. + # '$object: dependent.h' and one to simply 'dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -275,23 +289,26 @@ ;; icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h - # which is wrong. We want: + # which is wrong. We want # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : + # and will wrap long lines using '\': # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... - + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : @@ -300,15 +317,21 @@ exit $stat fi rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; @@ -344,7 +367,7 @@ done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. + # Add 'dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// @@ -359,9 +382,9 @@ tru64) # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. + # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= @@ -407,8 +430,7 @@ done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi @@ -443,11 +465,11 @@ p }' | $cygpath_u | sort -u | sed -n ' s/ /\\ /g -s/\(.*\)/ \1 \\/p +s/\(.*\)/'"$tab"'\1 \\/p s/.\(.*\) \\/\1:/ H $ { - s/.*/ / + s/.*/'"$tab"'/ G p }' >> "$depfile" @@ -478,7 +500,7 @@ shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -498,15 +520,14 @@ done test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' + # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ + tr ' ' "$nl" < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -562,8 +583,7 @@ # makedepend may prepend the VPATH from the source file name to the object. # No need to regex-escape $object, excess matching of '.' is harmless. sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -583,7 +603,7 @@ shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -652,8 +672,8 @@ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/ltmain.sh new/evas_generic_loaders-1.7.6/ltmain.sh --- old/evas_generic_loaders-1.7.5/ltmain.sh 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/ltmain.sh 2013-04-05 00:40:17.000000000 +0200 @@ -70,7 +70,7 @@ # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1ubuntu1 +# $progname: (GNU libtool) 2.4.2 # automake: $automake_version # autoconf: $autoconf_version # @@ -80,7 +80,7 @@ PROGRAM=libtool PACKAGE=libtool -VERSION="2.4.2 Debian-2.4.2-1ubuntu1" +VERSION=2.4.2 TIMESTAMP="" package_revision=1.3337 @@ -6124,10 +6124,7 @@ case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) - libs="$deplibs %DEPLIBS%" - test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then @@ -6447,19 +6444,19 @@ # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done continue fi # $pass = conv @@ -7352,9 +7349,6 @@ revision="$number_minor" lt_irix_increment=no ;; - *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" - ;; esac ;; no) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/Makefile.in new/evas_generic_loaders-1.7.6/src/Makefile.in --- old/evas_generic_loaders-1.7.5/src/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -15,6 +15,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -59,6 +76,11 @@ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -414,13 +436,10 @@ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -15,6 +15,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -64,6 +81,11 @@ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -420,13 +442,10 @@ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/common/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/common/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/common/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/common/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -15,6 +15,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -52,6 +69,11 @@ am__v_at_0 = @ SOURCES = DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/gst/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/gst/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/gst/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/gst/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -80,6 +97,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_gst_SOURCES) DIST_SOURCES = $(evas_image_loader_gst_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -257,8 +279,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/pdf/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/pdf/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/pdf/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/pdf/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -90,6 +107,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_pdf_SOURCES) DIST_SOURCES = $(evas_image_loader_pdf_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -267,8 +289,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/ps/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/ps/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/ps/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/ps/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -79,6 +96,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_ps_SOURCES) DIST_SOURCES = $(evas_image_loader_ps_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -256,8 +278,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/raw/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/raw/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/raw/Makefile.in 2013-01-04 15:26:43.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/raw/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -80,6 +97,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_raw_SOURCES) DIST_SOURCES = $(evas_image_loader_raw_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -253,8 +275,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/svg/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/svg/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/svg/Makefile.in 2013-01-04 15:26:44.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/svg/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -80,6 +97,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_svg_SOURCES) DIST_SOURCES = $(evas_image_loader_svg_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -253,8 +275,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/evas_generic_loaders-1.7.5/src/bin/xcf/Makefile.in new/evas_generic_loaders-1.7.6/src/bin/xcf/Makefile.in --- old/evas_generic_loaders-1.7.5/src/bin/xcf/Makefile.in 2013-01-04 15:26:44.000000000 +0100 +++ new/evas_generic_loaders-1.7.6/src/bin/xcf/Makefile.in 2013-04-05 00:40:19.000000000 +0200 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11.3 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -16,6 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -81,6 +98,11 @@ am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(evas_image_loader_xcf_SOURCES) DIST_SOURCES = $(evas_image_loader_xcf_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -257,8 +279,11 @@ $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org