Hello community, here is the log from the commit of package sensors for openSUSE:Factory checked in at 2013-05-27 10:01:49 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sensors (Old) and /work/SRC/openSUSE:Factory/.sensors.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "sensors" Changes: -------- --- /work/SRC/openSUSE:Factory/sensors/sensors.changes 2013-04-14 12:11:10.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.sensors.new/sensors.changes 2013-05-27 10:01:51.000000000 +0200 @@ -1,0 +2,22 @@ +Thu May 23 18:30:31 CEST 2013 - jdelv...@suse.de + +- lm_sensors-r6163-pwmconfig-raise-threshold.diff: pwmconfig: Raise + the detection threshold to 3/4 (bnc#810344). +- lm_sensors-r6164-pwmconfig-drop-comment.diff: pwmconfig: Drop a + stray comment. +- lm_sensors-r6165-pwmconfig-multiple-fans.diff: pwmconfig: + Properly deal with multiple fan control (bnc#810344). +- lm_sensors-r6172-fancontrol-absolute-paths.diff: fancontrol: Fix + handling of absolute paths in config (bnc#810344). + +------------------------------------------------------------------- +Thu May 23 18:06:50 CEST 2013 - jdelv...@suse.de + +- fancontrol.service: Cleanups. + +------------------------------------------------------------------- +Sat May 18 11:58:47 UTC 2013 - wer...@suse.com + +- Add fancontrol.service (bnc#810344). + +------------------------------------------------------------------- New: ---- fancontrol.service lm_sensors-r6163-pwmconfig-raise-threshold.diff lm_sensors-r6164-pwmconfig-drop-comment.diff lm_sensors-r6165-pwmconfig-multiple-fans.diff lm_sensors-r6172-fancontrol-absolute-paths.diff ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sensors.spec ++++++ --- /var/tmp/diff_new_pack.uAYQ6H/_old 2013-05-27 10:01:52.000000000 +0200 +++ /var/tmp/diff_new_pack.uAYQ6H/_new 2013-05-27 10:01:52.000000000 +0200 @@ -30,6 +30,7 @@ Source0: http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-%{version}.tar.bz2 Source1: lm_sensors.init Source2: baselibs.conf +Source3: fancontrol.service Patch1: lm_sensors-3.1.1-build.patch Patch2: lm_sensors-3.0.0-sensord-separate.patch Patch3: lm_sensors-3.0.0-sysconfig_metadata.patch @@ -39,6 +40,10 @@ Patch7: lm_sensors-r6113-ITE-IT877x-IT878x-driver.diff Patch8: lm_sensors-r6117-detection-ITE-IT8752F.diff Patch9: lm_sensors-r6123-AnalogDev-ADT7410-driver.diff +Patch10: lm_sensors-r6163-pwmconfig-raise-threshold.diff +Patch11: lm_sensors-r6164-pwmconfig-drop-comment.diff +Patch12: lm_sensors-r6165-pwmconfig-multiple-fans.diff +Patch13: lm_sensors-r6172-fancontrol-absolute-paths.diff BuildRoot: %{_tmppath}/%{name}-%{version}-build ExcludeArch: s390 s390x @@ -146,6 +151,10 @@ %patch7 -p1 %patch8 -p1 %patch9 -p1 +%patch10 -p1 +%patch11 -p1 +%patch12 -p1 +%patch13 -p1 %build RPM_OPT_FLAGS="$RPM_OPT_FLAGS" @@ -168,6 +177,7 @@ install -m 0755 %{S:1} $RPM_BUILD_ROOT/etc/init.d/lm_sensors ln -sf /etc/init.d/lm_sensors $RPM_BUILD_ROOT/usr/sbin/rclm_sensors install -D -m 0644 prog/init/lm_sensors.service %{buildroot}%{_unitdir}/lm_sensors.service + install -D -m 0644 %{SOURCE3} %{buildroot}%{_unitdir}/fancontrol.service %pre %service_add_pre lm_sensors.service @@ -211,6 +221,7 @@ %files %defattr(-,root,root) %{_unitdir}/lm_sensors.service +%{_unitdir}/fancontrol.service /etc/init.d/lm_sensors /usr/sbin/rclm_sensors /usr/bin/* ++++++ fancontrol.service ++++++ [Unit] Description=Start fan control, if configured ConditionFileNotEmpty=/etc/fancontrol After=lm_sensors.service [Service] Type=simple PIDFile=/var/run/fancontrol.pid EnvironmentFile=/etc/sysconfig/lm_sensors ExecStart=/usr/sbin/fancontrol [Install] WantedBy=multi-user.target ++++++ lm_sensors-r6163-pwmconfig-raise-threshold.diff ++++++ Subject: pwmconfig: Raise the detection threshold to 3/4 Upstream: yes, r6163 References: bnc#810344 Detection threshold of 2/3 of the maximum speed is too low, some fans will slow down to about that speed so controlled fans may be missed. Use 3/4 as the threshold to avoid these false negatives. --- prog/pwm/pwmconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/prog/pwm/pwmconfig +++ b/prog/pwm/pwmconfig @@ -448,7 +448,7 @@ do OS=`echo $SPEEDS | cut -d' ' -f$count` S=`echo $CURRENT_SPEEDS | cut -d' ' -f$count` echo " $j ... speed was $OS now $S" - let threshold=2*$OS/3 + let threshold=3*$OS/4 if [ $S -lt $threshold ] then echo " It appears that fan $j" ++++++ lm_sensors-r6164-pwmconfig-drop-comment.diff ++++++ Subject: pwmconfig: Drop a stray comment Upstream: yes, r6164 fancontrol supports multiple controlled fans for quite some time now. --- prog/pwm/pwmconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/prog/pwm/pwmconfig +++ b/prog/pwm/pwmconfig @@ -471,7 +471,7 @@ do exit 1 fi else - fanactive="$j+${fanactive}" #not supported yet by fancontrol + fanactive="$j+${fanactive}" fanactive_min="$S+${fanactive_min}" fi S=`cat $j` ++++++ lm_sensors-r6165-pwmconfig-multiple-fans.diff ++++++ Subject: pwmconfig: Properly deal with multiple fan control Upstream: yes, r6165 References: bnc#810344 When a given PWM output controls more than one fan, fanactive_min is no longer a space-separated list of numbers, it will also include items of the form "A+B". The tests in the rest of the code do not expect that and choke with errors like: /usr/sbin/pwmconfig: line 926: [: 538+799: integer expression expected /usr/sbin/pwmconfig: line 952: [: 538+799: integer expression expected As the only thing we really care about is whether any fan stops completely when PWM is 0, we can simply record the minimum of the lowest speed of all affected fans. --- prog/pwm/pwmconfig | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) --- a/prog/pwm/pwmconfig +++ b/prog/pwm/pwmconfig @@ -443,6 +443,7 @@ do let pwmactivecount=0 let count=1 + S_MIN= for j in $GOODFAN do OS=`echo $SPEEDS | cut -d' ' -f$count` @@ -461,7 +462,6 @@ do let pwmactivecount=1 pwmactive="$i ${pwmactive}" fanactive="$j ${fanactive}" - fanactive_min="$S ${fanactive_min}" # Give all correlated fans time to return to full speed sleep $DELAY @@ -472,8 +472,14 @@ do fi else fanactive="$j+${fanactive}" - fanactive_min="$S+${fanactive_min}" fi + + # Keep track of the slowest fan controlled by one PWM + if [ -z "$S_MIN" ] || [ $S -lt $S_MIN ] + then + S_MIN=$S + fi + S=`cat $j` if [ $S -lt $threshold ] then @@ -506,8 +512,11 @@ do if [ "$X" = "y" -o "$X" = "Y" ] then pwmactive="$i ${pwmactive}" + fanactive_min="0 $fanactive_min" fi echo + else + fanactive_min="$S_MIN $fanactive_min" fi done ++++++ lm_sensors-r6172-fancontrol-absolute-paths.diff ++++++ Subject: fancontrol: Fix handling of absolute paths in config Upstream: yes, r6172 References: bnc#810344 Reported by Marc Ferland. Make DEVPATH and DEVNAME mandatory only when using relative paths. Optionally support DEVNAME check when using absolute paths. --- prog/pwm/fancontrol | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/prog/pwm/fancontrol +++ b/prog/pwm/fancontrol @@ -289,11 +289,16 @@ fi cd $DIR # Check for configuration change -if [ -z "$DEVPATH" -o -z "$DEVNAME" ] +if [ "$DIR" != "/" ] && [ -z "$DEVPATH" -o -z "$DEVNAME" ] then echo "Configuration is too old, please run pwmconfig again" >&2 exit 1 fi +if [ "$DIR" = "/" -a -n "$DEVPATH" ] +then + echo "Unneeded DEVPATH with absolute device paths" >&2 + exit 1 +fi if ! ValidateDevices "$DEVPATH" "$DEVNAME" then echo "Configuration appears to be outdated, please run pwmconfig again" >&2 -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
