Hello community, here is the log from the commit of package geocode-glib for openSUSE:Factory checked in at 2013-09-27 17:11:04 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/geocode-glib (Old) and /work/SRC/openSUSE:Factory/.geocode-glib.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "geocode-glib" Changes: -------- --- /work/SRC/openSUSE:Factory/geocode-glib/geocode-glib.changes 2013-09-23 12:08:37.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.geocode-glib.new/geocode-glib.changes 2013-09-27 17:11:05.000000000 +0200 @@ -1,0 +2,8 @@ +Mon Sep 23 17:09:28 UTC 2013 - dims...@opensuse.org + +- Update to version 3.10.0: + + Depend on json-glib >= 0.16.2 to avoid conflict w/ json-c. + + Remove a now redundant workaround from a testcase. + + Fix `make distcheck` against latest gtk-doc. + +------------------------------------------------------------------- Old: ---- geocode-glib-0.99.4.tar.xz New: ---- geocode-glib-3.10.0.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ geocode-glib.spec ++++++ --- /var/tmp/diff_new_pack.Ko9kJq/_old 2013-09-27 17:11:05.000000000 +0200 +++ /var/tmp/diff_new_pack.Ko9kJq/_new 2013-09-27 17:11:05.000000000 +0200 @@ -17,18 +17,18 @@ Name: geocode-glib -Version: 0.99.4 +Version: 3.10.0 Release: 0 Summary: Convenience library for the Yahoo! Place Finder APIs License: LGPL-2.0+ Group: System/Libraries Url: http://www.gnome.org/ -Source: http://download.gnome.org/sources/geocode-glib/0.99/%{name}-%{version}.tar.xz +Source: http://download.gnome.org/sources/geocode-glib/3.10/%{name}-%{version}.tar.xz BuildRequires: gnome-doc-utils-devel BuildRequires: gobject-introspection-devel BuildRequires: intltool BuildRequires: pkgconfig(gio-2.0) >= 2.34 -BuildRequires: pkgconfig(json-glib-1.0) >= 0.14 +BuildRequires: pkgconfig(json-glib-1.0) >= 0.16.2 BuildRequires: pkgconfig(libsoup-2.4) BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ geocode-glib-0.99.4.tar.xz -> geocode-glib-3.10.0.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/ChangeLog new/geocode-glib-3.10.0/ChangeLog --- old/geocode-glib-0.99.4/ChangeLog 2013-09-17 16:51:19.000000000 +0200 +++ new/geocode-glib-3.10.0/ChangeLog 2013-09-23 17:31:47.000000000 +0200 @@ -1,3 +1,54 @@ +[33mcommit: fb5269a fb5269aeabdcdf5ba8530f9eeafff73eef9266ed +[32m[32mAuthor: Zeeshan Ali (Khattak) <zeesha...@gnome.org> +Date: Mon Sep 23 17:48:13 2013 +0300 + + Release 3.10.0 + + + NEWS | 14 ++++++++++++++ + configure.ac | 6 +++--- + 2 files changed, 17 insertions(+), 3 deletions(-) +[33mcommit: 566b8d5 566b8d54ca2ce08776050aaa1e110783f04e8dc2 +[32m[32mAuthor: Zeeshan Ali (Khattak) <zeesha...@gnome.org> +Date: Mon Sep 23 18:24:04 2013 +0300 + + Fix docs build + + For details: https://bugzilla.gnome.org/show_bug.cgi?id=701638#c15 + + + docs/Makefile.am | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) +[33mcommit: 8488e33 8488e337a85ef01563ca078a073ffc98724e5f8d +[32m[32mAuthor: Kalev Lember <kalevlem...@gmail.com> +Date: Mon Sep 23 15:18:55 2013 +0200 + + build: Depend on json-glib 0.16.2 + + Even though we don't need any new symbols from json-glib > 0.14, bump + the required version to 0.16.2 to make sure we are building against the + version of json-glib that's built with the -Bsymbolic linker flag. + + Fixes a possible crash in gnome-settings-daemon. + + http://blogs.gnome.org/ebassi/2013/09/16/do-not-link-against-pulseaudio-and-json-glib-0-16/ + + + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) +[33mcommit: 326f208 326f20829da92c39a1d623f53e06cbc0f049069a +[32m[32mAuthor: Zeeshan Ali (Khattak) <zeesha...@gnome.org> +Date: Tue Sep 17 21:25:45 2013 +0300 + + test-gcglib: Remove a now redundant workaround + + This ticket has been resolved so we don't need to workaround it: + + https://trac.openstreetmap.org/ticket/4918 + + + geocode-glib/test-gcglib.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) [33mcommit: ca37952 ca379525bc0ea75fc7d78f7810e155063874a989 [32m[32mAuthor: Zeeshan Ali (Khattak) <zeesha...@gnome.org> Date: Tue Sep 17 17:43:09 2013 +0300 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/Makefile.in new/geocode-glib-3.10.0/Makefile.in --- old/geocode-glib-0.99.4/Makefile.in 2013-09-17 16:51:09.000000000 +0200 +++ new/geocode-glib-3.10.0/Makefile.in 2013-09-23 17:31:37.000000000 +0200 @@ -268,6 +268,7 @@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/NEWS new/geocode-glib-3.10.0/NEWS --- old/geocode-glib-0.99.4/NEWS 2013-09-17 16:47:34.000000000 +0200 +++ new/geocode-glib-3.10.0/NEWS 2013-09-23 17:30:42.000000000 +0200 @@ -1,3 +1,17 @@ +3.10.0 +------ + +Changes since 0.99.4: + +- Depend on json-glib >= 0.16.2 to avoid conflict w/ json-c. +- Remove a now redundant workaround from a testcase. +- Fix `make distcheck` against latest gtk-doc. + +All contributors to this release: + +Kalev Lember <kalevlem...@gmail.com> +Zeeshan Ali (Khattak) <zeesha...@gnome.org> + 0.99.4 ------ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/configure new/geocode-glib-3.10.0/configure --- old/geocode-glib-0.99.4/configure 2013-09-17 16:51:08.000000000 +0200 +++ new/geocode-glib-3.10.0/configure 2013-09-23 17:31:35.000000000 +0200 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for geocode-glib 0.99.4. +# Generated by GNU Autoconf 2.69 for geocode-glib 3.10.0. # # Report bugs to <http://bugzilla.gnome.org/enter_bug.cgi?product=geocode-glib>. # @@ -591,8 +591,8 @@ # Identity of this package. PACKAGE_NAME='geocode-glib' PACKAGE_TARNAME='geocode-glib' -PACKAGE_VERSION='0.99.4' -PACKAGE_STRING='geocode-glib 0.99.4' +PACKAGE_VERSION='3.10.0' +PACKAGE_STRING='geocode-glib 3.10.0' PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=geocode-glib' PACKAGE_URL='' @@ -669,6 +669,7 @@ HTML_DIR GTKDOC_MKPDF GTKDOC_REBASE +GTKDOC_CHECK_PATH GTKDOC_CHECK PKG_CONFIG_LIBDIR PKG_CONFIG_PATH @@ -1419,7 +1420,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures geocode-glib 0.99.4 to adapt to many kinds of systems. +\`configure' configures geocode-glib 3.10.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1489,7 +1490,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of geocode-glib 0.99.4:";; + short | recursive ) echo "Configuration of geocode-glib 3.10.0:";; esac cat <<\_ACEOF @@ -1625,7 +1626,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -geocode-glib configure 0.99.4 +geocode-glib configure 3.10.0 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1994,7 +1995,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by geocode-glib $as_me 0.99.4, which was +It was created by geocode-glib $as_me 3.10.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2863,7 +2864,7 @@ # Define the identity of the package. PACKAGE='geocode-glib' - VERSION='0.99.4' + VERSION='3.10.0' cat >>confdefs.h <<_ACEOF @@ -13011,16 +13012,53 @@ - # Extract the first word of "gtkdoc-check", so it can be a program name with args. + # Extract the first word of "gtkdoc-check", so it can be a program name with args. set dummy gtkdoc-check; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GTKDOC_CHECK+:} false; then : +if ${ac_cv_prog_GTKDOC_CHECK+:} false; then : $as_echo_n "(cached) " >&6 else - case $GTKDOC_CHECK in + if test -n "$GTKDOC_CHECK"; then + ac_cv_prog_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_GTKDOC_CHECK="gtkdoc-check.test" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +GTKDOC_CHECK=$ac_cv_prog_GTKDOC_CHECK +if test -n "$GTKDOC_CHECK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 +$as_echo "$GTKDOC_CHECK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + # Extract the first word of "gtkdoc-check", so it can be a program name with args. +set dummy gtkdoc-check; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GTKDOC_CHECK_PATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GTKDOC_CHECK_PATH in [\\/]* | ?:[\\/]*) - ac_cv_path_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test with a path. + ac_cv_path_GTKDOC_CHECK_PATH="$GTKDOC_CHECK_PATH" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -13030,7 +13068,7 @@ test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GTKDOC_CHECK="$as_dir/$ac_word$ac_exec_ext" + ac_cv_path_GTKDOC_CHECK_PATH="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -13041,10 +13079,10 @@ ;; esac fi -GTKDOC_CHECK=$ac_cv_path_GTKDOC_CHECK -if test -n "$GTKDOC_CHECK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 -$as_echo "$GTKDOC_CHECK" >&6; } +GTKDOC_CHECK_PATH=$ac_cv_path_GTKDOC_CHECK_PATH +if test -n "$GTKDOC_CHECK_PATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK_PATH" >&5 +$as_echo "$GTKDOC_CHECK_PATH" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -13370,16 +13408,16 @@ elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4\""; } >&5 ($PKG_CONFIG --exists --print-errors "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GEOCODE_CFLAGS=`$PKG_CONFIG --cflags "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else @@ -13393,16 +13431,16 @@ elif test -n "$PKG_CONFIG"; then if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4\""; } >&5 ($PKG_CONFIG --exists --print-errors "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_GEOCODE_LIBS=`$PKG_CONFIG --libs "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4" 2>/dev/null` test "x$?" != "x0" && pkg_failed=yes else @@ -13425,18 +13463,18 @@ fi if test $_pkg_short_errors_supported = yes; then GEOCODE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4" 2>&1` else GEOCODE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GEOCODE_PKG_ERRORS" >&5 as_fn_error $? "Package requirements (gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4) were not met: $GEOCODE_PKG_ERRORS @@ -14360,7 +14398,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by geocode-glib $as_me 0.99.4, which was +This file was extended by geocode-glib $as_me 3.10.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -14426,7 +14464,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -geocode-glib config.status 0.99.4 +geocode-glib config.status 3.10.0 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/configure.ac new/geocode-glib-3.10.0/configure.ac --- old/geocode-glib-0.99.4/configure.ac 2013-09-17 16:47:34.000000000 +0200 +++ new/geocode-glib-3.10.0/configure.ac 2013-09-23 17:24:57.000000000 +0200 @@ -1,8 +1,8 @@ AC_PREREQ([2.63]) -m4_define(gclib_version_major, 0) -m4_define(gclib_version_minor, 99) -m4_define(gclib_version_micro, 4) +m4_define(gclib_version_major, 3) +m4_define(gclib_version_minor, 10) +m4_define(gclib_version_micro, 0) AC_INIT([geocode-glib], [gclib_version_major.gclib_version_minor.gclib_version_micro], @@ -61,7 +61,7 @@ dnl Requires for the library PKG_CHECK_MODULES(GEOCODE, gio-2.0 >= 2.34 - json-glib-1.0 >= 0.14 + json-glib-1.0 >= 0.16.2 libsoup-2.4) GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/docs/Makefile.am new/geocode-glib-3.10.0/docs/Makefile.am --- old/geocode-glib-0.99.4/docs/Makefile.am 2013-09-17 16:50:29.000000000 +0200 +++ new/geocode-glib-3.10.0/docs/Makefile.am 2013-09-23 17:24:57.000000000 +0200 @@ -84,10 +84,10 @@ EXTRA_DIST += version.xml.in if ENABLE_GTK_DOC -TESTS_ENVIRONMENT = cd $(srcdir) && \ - DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ - SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) -#TESTS = $(GTKDOC_CHECK) +TESTS_ENVIRONMENT = DOC_MODULE=$(DOC_MODULE) \ + DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ + SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) +TESTS = $(GTKDOC_CHECK) endif -include $(top_srcdir)/git.mk diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/docs/Makefile.in new/geocode-glib-3.10.0/docs/Makefile.in --- old/geocode-glib-0.99.4/docs/Makefile.in 2013-09-17 16:51:09.000000000 +0200 +++ new/geocode-glib-3.10.0/docs/Makefile.in 2013-09-23 17:31:37.000000000 +0200 @@ -84,7 +84,8 @@ build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/gtk-doc.make $(srcdir)/Makefile.in \ - $(srcdir)/Makefile.am $(srcdir)/version.xml.in + $(srcdir)/Makefile.am $(srcdir)/version.xml.in \ + $(top_srcdir)/test-driver subdir = docs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \ @@ -118,6 +119,208 @@ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red='[0;31m'; \ + grn='[0;32m'; \ + lgn='[1;32m'; \ + blu='[1;34m'; \ + mgn='[0;35m'; \ + brg='[1m'; \ + std='[m'; \ + fi; \ +} +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -160,6 +363,7 @@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ @@ -407,7 +611,7 @@ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt -CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) +CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp @ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = @@ -443,13 +647,15 @@ GTK_DOC_V_PDF = $(GTK_DOC_V_PDF_$(V)) GTK_DOC_V_PDF_ = $(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY)) GTK_DOC_V_PDF_0 = @echo " DOC Building PDF"; -@ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = cd $(srcdir) && \ -@ENABLE_GTK_DOC_TRUE@ DOC_MODULE=$(DOC_MODULE) DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ -@ENABLE_GTK_DOC_TRUE@ SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) +@ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = DOC_MODULE=$(DOC_MODULE) \ +@ENABLE_GTK_DOC_TRUE@ DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \ +@ENABLE_GTK_DOC_TRUE@ SRCDIR=$(abs_srcdir) BUILDDIR=$(abs_builddir) +@ENABLE_GTK_DOC_TRUE@TESTS = $(GTKDOC_CHECK) all: all-am .SUFFIXES: +.SUFFIXES: .log .test .test$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -496,6 +702,162 @@ cscope cscopelist: +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -530,6 +892,7 @@ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: @@ -553,6 +916,9 @@ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) @@ -631,22 +997,27 @@ uninstall-am: uninstall-local -.MAKE: install-am install-strip - -.PHONY: all all-am all-local check check-am clean clean-generic \ - clean-libtool clean-local cscopelist-am ctags-am dist-hook \ - distclean distclean-generic distclean-libtool distclean-local \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - maintainer-clean-local mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ - uninstall-am uninstall-local +.MAKE: check-am install-am install-strip +.PHONY: all all-am all-local check check-TESTS check-am clean \ + clean-generic clean-libtool clean-local cscopelist-am ctags-am \ + dist-hook distclean distclean-generic distclean-libtool \ + distclean-local distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-data-local install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic maintainer-clean-local mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + recheck tags-am uninstall uninstall-am uninstall-local + + +gtkdoc-check.test: Makefile + $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ + echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ + chmod +x $@ @ENABLE_GTK_DOC_TRUE@all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP) @ENABLE_GTK_DOC_FALSE@all-local: @@ -815,7 +1186,6 @@ @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html .PHONY : dist-hook-local docs -#TESTS = $(GTKDOC_CHECK) -include $(top_srcdir)/git.mk diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/docs/html/index.html new/geocode-glib-3.10.0/docs/html/index.html --- old/geocode-glib-0.99.4/docs/html/index.html 2013-09-17 16:51:20.000000000 +0200 +++ new/geocode-glib-3.10.0/docs/html/index.html 2013-09-23 17:31:47.000000000 +0200 @@ -15,7 +15,7 @@ <div> <div><table class="navigation" id="top" width="100%" cellpadding="2" cellspacing="0"><tr><th valign="middle"><p class="title">geocode-glib Reference Manual</p></th></tr></table></div> <div><p class="releaseinfo"> - for geocode-glib 0.99.4 + for geocode-glib 3.10.0 The latest version of this documentation can be found on-line at <a class="ulink" href="http://library.gnome.org/devel/geocode-glib/index.html" target="_top">http://library.gnome.org/devel/geocode-glib/</a>. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/docs/version.xml new/geocode-glib-3.10.0/docs/version.xml --- old/geocode-glib-0.99.4/docs/version.xml 2013-09-17 16:51:13.000000000 +0200 +++ new/geocode-glib-3.10.0/docs/version.xml 2013-09-23 17:31:40.000000000 +0200 @@ -1 +1 @@ -0.99.4 +3.10.0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/geocode-glib/Makefile.in new/geocode-glib-3.10.0/geocode-glib/Makefile.in --- old/geocode-glib-0.99.4/geocode-glib/Makefile.in 2013-09-17 16:51:09.000000000 +0200 +++ new/geocode-glib-3.10.0/geocode-glib/Makefile.in 2013-09-23 17:31:37.000000000 +0200 @@ -254,6 +254,7 @@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/geocode-glib/test-gcglib.c new/geocode-glib-3.10.0/geocode-glib/test-gcglib.c --- old/geocode-glib-0.99.4/geocode-glib/test-gcglib.c 2013-09-17 16:47:34.000000000 +0200 +++ new/geocode-glib-3.10.0/geocode-glib/test-gcglib.c 2013-09-17 20:25:33.000000000 +0200 @@ -144,10 +144,7 @@ tp = g_hash_table_new_full (g_str_hash, g_str_equal, g_free, g_free); - /* FIXME: Remove this comment & uncomment following line once this ticket is resolved: - * https://trac.openstreetmap.org/ticket/4918 - */ - /*add_attr (tp, "country", "United Kingdom");*/ + add_attr (tp, "country", "United Kingdom"); add_attr (tp, "region", "England"); add_attr (tp, "county", "Surrey"); add_attr (tp, "locality", "Guildford"); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/gtk-doc.make new/geocode-glib-3.10.0/gtk-doc.make --- old/geocode-glib-0.99.4/gtk-doc.make 2013-09-17 16:50:56.000000000 +0200 +++ new/geocode-glib-3.10.0/gtk-doc.make 2013-09-23 17:31:23.000000000 +0200 @@ -49,7 +49,12 @@ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt -CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) +gtkdoc-check.test: Makefile + $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \ + echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \ + chmod +x $@ + +CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) gtkdoc-check.test if ENABLE_GTK_DOC if GTK_DOC_BUILD_HTML diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/m4/gtk-doc.m4 new/geocode-glib-3.10.0/m4/gtk-doc.m4 --- old/geocode-glib-0.99.4/m4/gtk-doc.m4 2013-09-17 16:50:56.000000000 +0200 +++ new/geocode-glib-3.10.0/m4/gtk-doc.m4 2013-09-23 17:31:23.000000000 +0200 @@ -11,7 +11,12 @@ AC_BEFORE([AM_PROG_LIBTOOL],[$0])dnl setup libtool first dnl check for tools we added during development - AC_PATH_PROG([GTKDOC_CHECK],[gtkdoc-check]) + dnl Use AC_CHECK_PROG to avoid the check target using an absolute path that + dnl may not be writable by the user. Currently, automake requires that the + dnl test name must end in '.test'. + dnl https://bugzilla.gnome.org/show_bug.cgi?id=701638 + AC_CHECK_PROG([GTKDOC_CHECK],[gtkdoc-check],[gtkdoc-check.test]) + AC_PATH_PROG([GTKDOC_CHECK_PATH],[gtkdoc-check]) AC_PATH_PROGS([GTKDOC_REBASE],[gtkdoc-rebase],[true]) AC_PATH_PROG([GTKDOC_MKPDF],[gtkdoc-mkpdf]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/geocode-glib-0.99.4/test-driver new/geocode-glib-3.10.0/test-driver --- old/geocode-glib-0.99.4/test-driver 1970-01-01 01:00:00.000000000 +0100 +++ new/geocode-glib-3.10.0/test-driver 2013-09-23 17:31:37.000000000 +0200 @@ -0,0 +1,127 @@ +#! /bin/sh +# test-driver - basic testsuite driver script. + +scriptversion=2012-06-27.10; # UTC + +# Copyright (C) 2011-2013 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-autom...@gnu.org> or send patches to +# <automake-patc...@gnu.org>. + +# Make unconditional expansion of undefined variables an error. This +# helps a lot in preventing typo-related bugs. +set -u + +usage_error () +{ + echo "$0: $*" >&2 + print_usage >&2 + exit 2 +} + +print_usage () +{ + cat <<END +Usage: + test-driver --test-name=NAME --log-file=PATH --trs-file=PATH + [--expect-failure={yes|no}] [--color-tests={yes|no}] + [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT +The '--test-name', '--log-file' and '--trs-file' options are mandatory. +END +} + +# TODO: better error handling in option parsing (in particular, ensure +# TODO: $log_file, $trs_file and $test_name are defined). +test_name= # Used for reporting. +log_file= # Where to save the output of the test script. +trs_file= # Where to save the metadata of the test run. +expect_failure=no +color_tests=no +enable_hard_errors=yes +while test $# -gt 0; do + case $1 in + --help) print_usage; exit $?;; + --version) echo "test-driver $scriptversion"; exit $?;; + --test-name) test_name=$2; shift;; + --log-file) log_file=$2; shift;; + --trs-file) trs_file=$2; shift;; + --color-tests) color_tests=$2; shift;; + --expect-failure) expect_failure=$2; shift;; + --enable-hard-errors) enable_hard_errors=$2; shift;; + --) shift; break;; + -*) usage_error "invalid option: '$1'";; + esac + shift +done + +if test $color_tests = yes; then + # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'. + red='[0;31m' # Red. + grn='[0;32m' # Green. + lgn='[1;32m' # Light green. + blu='[1;34m' # Blue. + mgn='[0;35m' # Magenta. + std='[m' # No color. +else + red= grn= lgn= blu= mgn= std= +fi + +do_exit='rm -f $log_file $trs_file; (exit $st); exit $st' +trap "st=129; $do_exit" 1 +trap "st=130; $do_exit" 2 +trap "st=141; $do_exit" 13 +trap "st=143; $do_exit" 15 + +# Test script is run here. +"$@" >$log_file 2>&1 +estatus=$? +if test $enable_hard_errors = no && test $estatus -eq 99; then + estatus=1 +fi + +case $estatus:$expect_failure in + 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;; + 0:*) col=$grn res=PASS recheck=no gcopy=no;; + 77:*) col=$blu res=SKIP recheck=no gcopy=yes;; + 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;; + *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;; + *:*) col=$red res=FAIL recheck=yes gcopy=yes;; +esac + +# Report outcome to console. +echo "${col}${res}${std}: $test_name" + +# Register the test result, and other relevant metadata. +echo ":test-result: $res" > $trs_file +echo ":global-test-result: $res" >> $trs_file +echo ":recheck: $recheck" >> $trs_file +echo ":copy-in-global-log: $gcopy" >> $trs_file + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org