Hello community,
here is the log from the commit of package xterm for openSUSE:Factory checked
in at 2015-03-30 19:10:25
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xterm (Old)
and /work/SRC/openSUSE:Factory/.xterm.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xterm"
Changes:
--------
--- /work/SRC/openSUSE:Factory/xterm/xterm.changes 2015-01-07
09:38:22.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.xterm.new/xterm.changes 2015-03-30
19:10:27.000000000 +0200
@@ -1,0 +2,139 @@
+Fri Mar 27 16:45:16 UTC 2015 - pce...@suse.com
+
+- Patch #317 - 2015/03/27
+ * adapt example for exec-formatted from Lukáš Zapletal's
+ webpage to manual (Debian #780008).
+ * add a short usage section to the xterm manual, including
+ notes on setting the window title (Debian #742477).
+ * revise a change made to ICH in patch #314 to address
+ limit-checks (reports/testcases by Zoltán Kéri and Joe
+ Peterson, also reported by Christian Weisgerber).
+- Patch #316 - 2015/03/07
+ * revert change to make DCH honor top/bottom scrolling margins.
+ For the record, both the VT420 and VT520 reference manuals
+ incorrectly state that "DCH has no effect outside the
+ scrolling margins."
+ * fix regression in DCH introduced in adjustment for
+ limit-check in patch #315 (report/testcase by Zoltán Kéri,
+ also reported by Christian Weisgerber).
+ * correct default value for configure option
+ --enable-initial-erase; it should be "False", but in patch
+ #315 it was "Maybe", which differed from default set in patch
+ #192.
+- Patch #315 - 2015/03/02
+ * change default for --enable-narrowproto for Cygwin to "no" to
+ better match contemporary configurations (report by Jens
+ Schweikhardt, prompted by discussion).
+ * provide OSC 106 as an alternative to OSC 6, avoiding conflict
+ with one of Terminal.app's undocumented escape sequences
+ (report by Egmont Koblinger).
+ * fix an off-by-one in comparison when autowrap and left/right
+ margins are combined (report by George Nachman).
+ * modify DECBI and DECFI to work outside the left/right
+ margins, since the vague VT520 reference manual could support
+ that interpretation (suggested by George Nachman).
+ * correct response for DECSCUSR in DECRQSS (report/analysis by
+ George Nachman).
+ * add DECSLRM to list for DECRQSS in ctlseqs.ms (report by
+ George Nachman).
+ * improve limit-checks versus assert's in the debugging version
+ (reports by George Nachman).
+ * correct a problem with multiple writes to the right-margin
+ when autowrap is turned off (report by George Nachman, also
+ reported in Gnome #744819 by Ulf Magnusson).
+ * modify DCH to honor top/bottom and left/right margins (report
+ by George Nachman).
+ * correct off-by-one in comparison so that DL honors left/right
+ margins (report by George Nachman).
+ * correct logic of DECSCL, which always set 8-bit controls as a
+ side-effect (report by George Nachman).
+ * correct loop limit for DECSED 1, when DECSCA is enabled
+ (report by George Nachman).
+ * fix a entry in csi_table for “$”, needed for CSI [ $ z
+ (report by George Nachman).
+ * remove restriction from patch #279 changes on DECIC and DECDC
+ to left-right mode (report by George Nachman).
+ * correct PID value returned in response to DECRQCRA
+ (report/analysis by George Nachman).
+ * fix an ifdef'ing problem, where --disable-dec-locator would
+ turn off logic needed for DECIC and DECDC (report by George
+ Nachman).
+ * correct order of parameters in report for CSI 1 9 t, which
+ gives the screensize in characters (report by George
+ Nachman).
+ * add null pointer checks for a case in DECCRA where part of
+ the target rectangle lies outside the screen limits (report
+ by George Nachman).
+ * remove extra "6" for selective erase from DA1 response
+ (report by George Nachman).
+ * support Xinerama screen specification in geometry parsing
+ (patch by Nicolas George).
+ * add configure option --enable-initial-erase to set
+ ptyInitialErase consistently with manpage, as well as adding
+ a table in manpage to clarify the relationship between the
+ resources related to the backarrow key (Debian #775952).
+ * add configure --enable-builtin-xpms to simplify compiling-in
+ the icons introduced in patch #284 (prompted by discussion
+ with William Bulley).
+ * fix/improve autoconf macros:
+ + CF_WITH_APP_DEFAULTS, add paths for OSX
+ + CF_WITH_MAN2HTML, configure option "--with-man2html"
+ provides "man2html" as alternative to groff's man/html
+ conversion
+ * fix some minor issues in manpage (Jens Schweikhardt).
+- Patch #314 - 2014/12/28
+ * fix a minor bug in the termcap-specific version of resize
+ when the lines or columns values are at the very end of an
+ incomplete termcap string (prompted by coverity report).
+ * improve paste64 feature (report by Olaf Rogalsky)
+ + fix “p;” command in paste64.pl example.
+ + modify _OwnSelection to allow the paste64 control to cause
+ primary/clipboard selections to be disowned and cleared.
+ + omit an extra "=" used in padding, to make the base64
+ response a multiple of four characters.
+ + modify _ConvertSelectionHelper to not stop converting on
+ embedded nulls in the primary or clipboard selection. That
+ makes the behavior consistent with cut-buffers. Nulls are
+ not passed on to the application because they are used for
+ separators in the X library calls that convert
+ XTextProperty values.
+ * add configure option --with-man2html to allow an alternative
+ to groff's man/html conversion.
+ * review and modify resource-settings which can be set via
+ control sequences, etc:
+ + add OSC 6, to enable/disable colors set via OSC 5, without
+ changing the color assignments (prompted by patch by Ingo
+ Brückl).
+ + add command-line option -itc for italics.
+ + add colorIT and colorITMode for italics, like colorBD,
+ etc.
+ + guard allowPasteControls against modification by editres.
+ * change passedPty from fixed-length to allocated to ensure
+ that it is long enough to hold the -S option value (report by
+ Ben Longbons).
+ * improve ReGIS graphics initialization (Ross Combs):
+ + add a new string resource to set the default ReGIS font.
+ + fix a caching problem where the font name wasn't taken into
+ consideration when looking up cached metrics.
+ + enables use of fractional values in coordinates (which in
+ turn allows setting the coordinates to something like
+ [0,1][1,0])
+ + doubles the minimum ReGIS graphic to 200x200
+ + set the default ReGIS image size to "auto"
+ + fix some swapped width/height parameters in TRACE messages
+ + add support for scaling and mirrored coordinate systems to
+ the screen address command
+ + sets a minimum ReGIS graphics size of 100x100 -- smaller
+ address ranges will be scaled up
+ + reset the image if either the width or height is zero
+ (which should happen together or not at all, but switching
+ the logic gets rid of some parentheses)
+ + adds support for alternate screen coordinates (just
+ offsets, not inverted coordinates or scaling)
+ + keeps the graphics state across ReGIS calls unless P1 or P3
+ entry codes are used
+ + changes loops to continue after parsing whitespace to allow
+ trailing whitespace
+ + fixes some incorrect character casts
+
+-------------------------------------------------------------------
Old:
----
xterm-313.tgz
xterm-313.tgz.asc
New:
----
xterm-317.tgz
xterm-317.tgz.asc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xterm.spec ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -19,7 +19,7 @@
%define vttest_version 20120506
%define splitbin 0%{?suse_version} >= 1300
Name: xterm
-Version: 313
+Version: 317
Release: 0
Summary: The basic X terminal program
License: MIT
++++++ xterm-313.tgz -> xterm-317.tgz ++++++
++++ 18298 lines of diff (skipped)
++++++ xterm-decomposed_bitmaps.patch ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -21,7 +21,7 @@
diff --git a/misc.c b/misc.c
--- a/misc.c
+++ b/misc.c
-@@ -2213,16 +2213,18 @@ ReportAnsiColorRequest(XtermWidget xw, i
+@@ -2216,16 +2216,18 @@ ReportAnsiColorRequest(XtermWidget xw, i
}
static void
++++++ xterm-enable_libtinfo.patch ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -29,7 +29,7 @@
diff --git a/configure b/configure
--- a/configure
+++ b/configure
-@@ -5599,20 +5599,20 @@ echo "$as_me:5598: checking for $cf_test
+@@ -5559,20 +5559,20 @@ echo "$as_me:5558: checking for $cf_test
echo $ECHO_N "checking for $cf_test_message function... $ECHO_C" >&6
if test "${cf_cv_lib_tgetent+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
++++++ xterm-forbid_window_and_font_ops.patch ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -28,7 +28,7 @@
diff --git a/xterm.man b/xterm.man
--- a/xterm.man
+++ b/xterm.man
-@@ -1809,17 +1809,17 @@ The default is \*(``false\*(''.
+@@ -1894,17 +1894,17 @@ The default is \*(``false\*(''.
.TP
.B "allowColorOps (\fPclass\fB AllowColorOps)"
Specifies whether control sequences that set/query the dynamic colors should
be allowed.
@@ -39,7 +39,7 @@
Specifies whether control sequences that set/query the font should be allowed.
-The default is \*(``true\*(''.
+The default is \*(``false\*(''.
- .TP 5
+ .TP 8
.B "allowPasteControls (\fPclass\fB AllowPasteControls)"
If true, allow control characters such as BEL and CAN to be pasted.
Formatting characters (tab, newline) are always allowed.
++++++ xterm-settings.patch ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -284,7 +284,7 @@
diff --git a/xterm.man b/xterm.man
--- a/xterm.man
+++ b/xterm.man
-@@ -4157,19 +4157,23 @@ This option specifies the font to be use
+@@ -4267,19 +4267,23 @@ This option specifies the font to be use
in the \*(``OverTheSpot\*('' input method.
.IP
In \*(``OverTheSpot\*('' preedit type, the preedit (preconversion)
++++++ xterm-sigwinch.patch ++++++
--- /var/tmp/diff_new_pack.TpjAU4/_old 2015-03-30 19:10:28.000000000 +0200
+++ /var/tmp/diff_new_pack.TpjAU4/_new 2015-03-30 19:10:28.000000000 +0200
@@ -1,7 +1,7 @@
diff --git a/screen.c b/screen.c
--- a/screen.c
+++ b/screen.c
-@@ -2246,17 +2246,17 @@ ScreenResize(XtermWidget xw,
+@@ -2248,17 +2248,17 @@ ScreenResize(XtermWidget xw,
#ifdef USE_STRUCT_WINSIZE
ts.ws_xpixel = (ttySize_t) width;
ts.ws_ypixel = (ttySize_t) height;
